: Depending on model / Abhängig vom Modell / Selon le modèle / In base al modello / En función del modelo / Dependendo do modelo / Afhankelijk van het model /
Ανάλογα με το μοντέλο / Odvisno od modela / Típusfüggő / Zależnie od modelu / Závisí na modelu / V závislosti od modelu / În funcţie de model /
В зависимост от модела / Sõltub mudelist / Priklauso nuo modelio / Atkarībā no modeļa / U zavisnosti od modela / Ovisno o modelu / Në varësi të modelit /
Ovisno o modelu / Во зависност од моделот / Beroende på modell / Avhengig av modell / Afhængigt af modellen / Mallin mukaan /
Page 1
В зависимост от модела / Sõltub mudelist / Priklauso nuo modelio / Atkarībā no modeļa / U zavisnosti od modela / Ovisno o modelu / Në varësi të modelit / Ovisno o modelu / Во зависност од моделот / Beroende på modell / Avhengig av modell / Afhængigt af modellen / Mallin mukaan / www.lg.com P/No: MFL69668912 (1702-REV01)
Page 2
Read Safety and Reference. Lásd: Biztonsági óvintézkedések. Magyar A tápellátásra és az áramfogyasztásra vonatkozó For the power supply and power consumption, refer adatok a készülékre ragasztott címkén találhatók. to the label attached to the product. Przeczytaj Sicherheitshinweise und Referenzen: Bitte lesen! Informationen zur Stromversorgung und zum Dokładne informacje o zasilaniu i zużyciu energii są...
Page 3
Ελληνικά Για πληροφορίε σχετικά ε την τροφοδοσία και την Izlasiet Drošībai un uzziņai. Latviešu κατανάλωση ενέργεια , δείτε την ετικέτα του προϊόντο . Informāciju par elektroenerģijas padevi un patēriņu skatiet izstrādājumam pievienotajā etiķetē. Preberite Varnostne informacije in napotki. Slovenščina Pročitajte Bezbednost i informacije. Podatke o napajanju in porabi energije si oglejte na Srpski nalepki izdelka.
Page 5
ANTENNA/ CABLE IN HDMI IN HDMI IN/ARC USB IN AUDIO OUT/ H/P OUT...
Page 6
AUDIO OUT/ H/P OUT Satellite IN OPTICAL DIGITAL AUDIO OUT COMPONENT IN AV IN VIDEO/Y L/MONO AUDIO R VIDEO/Y L/MONO AUDIO R...
Page 7
COMPONENT IN AV IN VIDEO/Y L/MONO AUDIO R VIDEO/Y L/MONO AUDIO R VIDEO AUDIO VIDEO L/MONO AUDIO R...
Page 13
OWNER’S MANUAL Safety and Reference LED TV* * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. www.lg.com *MFL69365752* P/NO : MFL69365752(1702-REV01) Printed in Korea...
Page 14
Warning! Safety instructions • Make sure to connect Mains cable to compliant AC mains socket with Grounded earth pin. (Except for devices which are not grounded on earth.) Otherwise possibility you may be electrocuted or injured. • Insert power cable plug completely into wall socket otherwise if CAUTION not secured completely into socket, fire ignition may break out.
Page 15
• Only use an authorized AC adapter and power cord approved by • When connecting external devices such as video game consoles, LG Electronics. Otherwise, this may result in fire, electric shock, make sure the connecting cables are long enough. Otherwise, malfunction or product deformation.
Page 16
Preparing • Take care not to touch the ventilation openings when watching the TV for long periods as the ventilation openings may become hot. This does not affect the operation or performance of the product. • If the TV is turned on for the first time after it was shipped from the • ...
Lifting and moving the TV • Do not use any unapproved items to ensure the safety and product life span. • Any damage or injuries caused by using unapproved Please note the following advice to prevent the TV from being scratched items are not covered by the warranty.
Using the button Basic functions <A / B type> (Depending on model) Power On (Press) You can simply operate the TV functions, using the button. Power Off (Press and hold) <A type> Volume Control Programmes Control <C type> Power On (Press) Power Off (Press and Hold) Menu Control (Press...
LG recommends that wall mounting be performed by a qualified professional installer. We recommend the use of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with 10 cm cables connected. When you do not use LG’s wall mount bracket, please use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices.
Page 20
• When installing the wall mounting bracket, it is recommended to 65SJ93** cover the stand hole using tape, in order to prevent the influx of 60/65SJ85** dust and insects. (Depending on model) 60/65SJ81** 65SJ80** 75/86SJ95** Model 60/65UJ75** 70/75UJ67** 65UJ70** 75UJ65** 65UJ67** 60/65UJ65** 60/65UJ63**...
Connections (notifications) Satellite dish connection (Only satellite models) Connect various external devices to the TV and switch input modes to Connect the TV to a satellite dish to a satellite socket with a satellite RF select an external device. For more information of external device’s cable (75 Ω).
Remote control (POWER) Turns the TV on or off. Selects Radio, TV and DTV programme. (INPUT) Changes the input source. (Some buttons and services may not be provided depending on models (Q. Settings) Accesses the Quick Settings. or regions.) By zooming in on the selected area, you can view it in The descriptions in this manual are based on the buttons on the remote full screen.
Magic remote functions Adjusts the volume level. (Some buttons and services may not be provided depending on models Scrolls through the saved programmes. or regions.) (MUTE) Mutes all sounds. When the message “Magic remote battery is low. Change the battery.” is (Voice recognition) displayed, replace the battery.
In addition to the source code, all referred license terms, warranty pointed. disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM Registering magic remote for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.
Troubleshooting Abnormal Display • If the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with Cannot control the TV with the remote control. product. • ...
Specifications Wireless module specification • As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table. • For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.
Page 27
(Depending on country) Digital TV Analogue TV DVB-T DVB-T2 PAL/SECAM, B/G, D/K, I Television system DVB-C SECAM L DVB-S/S2 DVB-S/S2 DVB-C DVB-T/T2 VHF III : 174 ~ 230 MHz Channel coverage UHF IV : 470 ~ 606 MHz 46 ~ 862 MHz (Band) 950 ~ 2150 MHz 46 ~ 890 MHz...
Page 28
Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. MODEL SERIAL...
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com...
KEY CODES KEY CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button List R/C Button CH -, PR - R/C Button Exit R/C Button Volume + R/C Button PIP(AD) R/C Button...
Page 31
(TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter RS-232C IN which is not made nor provided by LG. (CONTROL & SERVICE) (TV) (PC) • It can be purchased from computer stores that carry accessories for IT support professionals.
Page 32
EXTERNAL CONTROL DEVICE SETUP (TV) (PC) (TV) (PC) Phone jack Type RS-232C IN • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and (CONTROL & SERVICE) (PC) (TV) the TV, which is specified in the manual. RS-232C IN (CONTROL &...
Page 33
EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA...
Page 34
EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
Page 35
EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) Ack [d][ ][Set ID][ ][OK/NG][Data][x] ► To control Power *On or Off of the set. * In case of video mute on only, TV will display On Transmission[k][a][ ][Set ID][ ][Data][Cr] Screen Display(OSD).
Page 36
EXTERNAL CONTROL DEVICE SETUP Data Min : 00 to Max : 64 * (Depending on model) Ack [i][ ][Set ID][ ][OK/NG][Data][x] 14. Bass (Command: k s) 09. Tint (Command: k j) ► To adjust Bass. ► To adjust the screen tint. You can also adjust in the AUDIO menu.
Page 37
EXTERNAL CONTROL DEVICE SETUP Set ID = All = 00 5th Band 20(decimal) Data 00 & 01 = Channel Data is 10 = 00 0a Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] Data 02 = Analog Antenna TV = 00 Result = ma 00 00 0a 00 * It depends on model, and can adjust when sound mode is EQ adjustable value.
Page 38
EXTERNAL CONTROL DEVICE SETUP Number Data 05 = Digital Antenna TV = 02 - 22 : Antenna TV (DTV) – Don’t Use Physical Total = ma 00 00 00 11 00 01 02 Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical 2.
Page 39
11 11 EXTERNAL CONTROL DEVICE SETUP 24. Input select (Command: x b) (Main Picture Input) ► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data X : don’t care 00 : DTV 01 : CADTV 02 : Satellite DTV 10 : ATV Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02] ISDB-BS (Japan)
Page 40
EXTERNAL CONTROL DEVICE SETUP 27. Auto Configure (Command: j u) (Depending on model) ► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01 : Run Auto Configure Ack [u][ ][Set ID][ ][OK/NG][Data][x]...