Summary of Contents for Toro Flex-Force Power System 60V MAX Axial Blower
Page 1
Form No. 3441-515 Rev C Flex-Force Power System ™ MAX Axial Blower Model No. 51821—Serial No. 320000001 and Up Model No. 51821T—Serial No. 320000001 and Up *3441-515* Register at www.Toro.com. Original Instructions (EN)
Page 2
Whenever you need service, genuine Toro parts, or For assistance, please see additional information, contact an Authorized Service www.Toro.com/support Dealer or Toro Customer Service and have the model for instructional videos and serial numbers of your product ready. Figure 1...
O position. Use only the battery pack specified by Toro. Operate the appliance only in daylight or good Using other accessories and attachments may artificial light. increase the risk of injury and fire.
Page 4
Do not heat the battery pack above 68°C (154°F) or incinerate it. Replace the battery pack with a genuine Toro battery pack only; using another type of battery pack may cause a fire or explosion. Keep...
Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or missing. decal144-3098 144-3098 decal144-3094 144-3094 1. The battery pack is 3.
Page 6
decal137-9461 137-9461 1. Battery charge status decal144-3081 144-3081 1. Warning—read the 3. Thrown object Operator’s Manual; stay hazard—keep bystanders away from moving parts; away. keep all guards and shields in place; wear eye protection; do not expose to rain. 2. Warning—keep bystanders away from the machine in all directions.
Setup Product Overview Important: The battery pack is not fully charged when you purchase it. Before using the tool for the first time, refer to Charging the Battery Pack (page 10). Assembling the Blower Slide the blower tube onto the blower housing. You may need to press down on the tube latch for the blower tube to lock into place (Figure...
Specifications Operation Model 51821/51821T WARNING Rated Voltage 60V DC maximum, 54 VDC nominal usage The blower can throw debris, possibly Charger Type 88602 or 88610 (included with causing serious personal injury to you or 51821) bystanders. Battery Type 88620 (included with 51821), •...
Page 9
Adjusting the Air Speed of the Blower To achieve maximum performance (air speed) , press and hold the turbo boost button for the desired amount of time (Figure To adjust the air speed as you blow, use the variable-speed trigger (Figure To maintain the current air speed, engage the speed lock...
Slide the charger into the battery pack until it is fully seated (Figure 10). To remove the charger, slide the charger backward out of the battery. Refer to the following table to interpret the LED indicator light on the battery charger. Indicator Indicates light...
Page 11
If you are located outside of the US • Do not store the tool with the battery pack installed. and Canada, please contact your authorized Toro distributor. • Clean all foreign material from the product. • When not in use, store the tool, battery pack, and battery charger out of the reach of children.
Troubleshooting Perform only the steps described in these instructions. All further inspection, maintenance, and repair work must be performed by an authorized service center or a similarly qualified specialist if you cannot solve the problem yourself. Problem Possible Cause Corrective Action The tool does not start.
Page 15
While the exposure from Toro products may be negligible or well within the “no significant risk” range, out of an abundance of caution, Toro has elected to provide the Prop 65 warnings. Moreover, if Toro does not provide these warnings, it could be sued by the State of California or by private parties seeking to enforce Prop 65 and subject to substantial penalties.