Page 1
LED-TV Chassis : N79A Model : UE**C7*00W* UE**C8**0X* UA**C7000W* UA**C8000X* SERVICE Manual TFT-LCD TV Contents 1. Precautions 3. Disassembly and Reassembly 4. Troubleshooting 5. Exploded View & Part List 6. Wiring Diagram UE**C7*00W*/ UE**C8**0X* / UA**C7000W*/UA**C8000X* Refer to the service manual in the GSPN (see the rear cover) for the more information.
1. Precautions 1. Precautions 1-1. Safety Precautions Follow these safety, servicing and ESD precautions to prevent damage and to protect against potential hazards such as electrical shock. 1-1-1. Warnings For continued safety, do not attempt to modify the circuit board. Disconnect the AC power and DC power jack before servicing.
1. Precautions 1-2. Servicing Precautions WARNING: An electrolytic capacitor installed with the wrong polarity might explode. Caution: Before servicing units covered by this service manual, read and follow the Safety Precautions section of this manual. Note: safety precautions, always follow the safety precautions. 1-2-1 General Servicing Precautions Always unplug the unit’s AC power cord from the AC power source and disconnect the DC Power Jack before attempting to:...
1. Precautions 1-4. Installation Precautions For safety reasons, more than a people are required for carrying the product. Do not place the product in areas with poor ventilation such as a bookshelf or closet. The increased internal Bend the external antenna cable when connecting it to the product. This is a measure to protect it from being exposed shock.
3. Disassembly and Reassemble 3. Disassembly and Reassembly This section of the service manual describes the disassembly and reassembly procedures for the LED TV. WARNING: This LED TV contains electrostatically sensitive devices. Use caution when handling these components. 3-1. Disassembly and Reassembly Cautions: 1.
Page 54
3. Disassembly and Reassemble Description Picture Description Screws 2. Remove the screws of rear-cover. 6003-000133 Size:L8 6003-001003 Size:L12 2-1. Pull out a AC Power Cord 3. Lift up the rear-cover.
Page 55
3. Disassembly and Reassemble Description Picture Description Screws 4. Remove the cables and screws from 46 inch SMPS, Main board and Woofer and Bracket stand link. 55 inch 65 inch 6001-002283 Size:L5 6003-000133 Size:L8...
Page 56
3. Disassembly and Reassemble Description Picture Description Screws 5. Lift up the panel so you can remove front cover. 6. Remove the screw and speaker then you can remove the function assy. 6003-000133 Size:L8 Reassembly procedures are in the reverse order of disassembly procedures.
6. Wiring Diagram 6-3. Connector Functions Connector Functions CNM801 CN1001 Supply power from SMPS to Main Board. The LVDS signal transfered from Main Board to Panel. CN9301 T-CON 6-4. Cables Main-SMPS Main-Tcon Function Assy 7000 40" : BN96-13847A 46" : BN96-13847B 40"...