Table of Contents
Advertisement
4.
Place a 2.5" hot-swap storage device
into the drive tray.
Ensure that the four screw holes of
the storage device match the screw
holes on the drive tray.
5.
Secure the drive tray with four
screws (2 screws on each side).
6.
Carefully insert the drive tray and
push it all the way to the depth of the
bay. Lock the secure lock to secure
the drive tray in place.
7.
Repeat steps 1 to 6 to install the
other storage devices.
2-16
Drive tray screw hole
Drive tray with a 2.5"
hot-swap storage
device installed
Chapter 2: Hardware Information
screw hole
Advertisement
Table of Contents
