Saving The Module Configuration - Cisco Nexus 9504 Hardware Installation Manual
Nx-os mode switch
Hide thumbs
Also See for Nexus 9504:
- Hardware installation manual (138 pages) ,
- Configuration manual (11 pages) ,
- Hardware installation manual (110 pages)
Table of Contents
Advertisement
Saving the Module Configuration
To exit type 'exit', to abort type '$.'
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2013, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
switch(standby)#
To exit the module-specific prompt, use the exit command.
Note
Tip
If you are not accessing the switch from a console terminal, this command is the only way to access the
standby supervisor module.
Saving the Module Configuration
To save the new configuration to nonvolatile storage, use the copy running-config startup-config command
from EXEC mode. Once you enter this command, the running and the startup copies of the configuration are
identical.
The following table lists various scenarios when module configurations are preserved or lost.
Scenario
A particular switching module is removed and you
used the copy running-config startup-config
command again.
A particular switching module is removed and the
same switching module is replaced before you enter
the copy running-config startup-config command
again.
A particular switching module is removed and
replaced with the same type switching module, and
you entered the reload module slot_number
command.
A particular switching module is reloaded when you
enter the reload module slot_number command.
Cisco Nexus 9504 NX-OS Mode Switch Hardware Installation Guide
46
Result
The configured module information is lost.
The configured module information is preserved.
The configured module information is preserved.
The configured module information is preserved.
Managing the Switch
Advertisement
Table of Contents
