Table of Contents
Advertisement
EBU27482
Installing a wheel
1. Place the ATV on a level surface.
2. Install the wheel and the nuts.
TIP
When installing the wheel, make sure its arrow
mark
points toward the rotating direction of
the wheel.
8
1. Arrow mark
3. Lower the ATV to the ground.
4. Tighten the wheel nuts to the specified
torques.
Tightening torques:
Front wheel nut:
45 Nm (4.5 m·kgf, 33 ft·lbf)
Rear wheel nut:
45 Nm (4.5 m·kgf, 33 ft·lbf)
EBU25741
Troubleshooting
Although Yamaha ATVs receive a thorough in-
spection before shipment from the factory, trouble
may occur during operation. Any problem in the
fuel, compression, or ignition systems, for exam-
ple, can cause poor starting and loss of power.
The following troubleshooting charts represent
quick and easy procedures for checking these vi-
tal systems yourself. However, should your ATV
require any repair, take it to a Yamaha dealer,
whose skilled technicians have the necessary
tools, experience, and know-how to service the
ATV properly.
Use only genuine Yamaha replacement parts. Im-
itation parts may look like Yamaha parts, but they
are often inferior, have a shorter service life and
can lead to expensive repair bills.
8-49
Advertisement
Table of Contents
Troubleshooting
