Page 1
SERVICE MANUAL Scanner Printer Copier • • EPSON Stylus PHOTO RX600/610 , RX620/630 SEOT03006 Download Service Manual And Resetter Printer at http://printer1.blogspot.com...
Page 2
The contents of this manual are subject to change without notice. All effort have been made to ensure the accuracy of the contents of this manual. However, should any errors be detected, SEIKO EPSON would greatly appreciate being informed of them.
Page 3
2. MAKE CERTAIN THAT THE SOURCE VOLTAGES IS THE SAME AS THE RATED VOLTAGE, LISTED ON THE SERIAL NUMBER/RATING PLATE. IF THE EPSON PRODUCT HAS A PRIMARY AC RATING DIFFERENT FROM AVAILABLE POWER SOURCE, DO NOT CONNECT IT TO THE POWER SOURCE.
Page 4
C H E C K condition that is necessary to accomplish a task efficiently. It may P O I N T Epson-approved lubricants and adhesives required for servicing also provide additional information that is related to a specific the product.
Page 5
• 3.2 Troubleshooting at Unit Level Table 3-1 LCD Indication (p.21) is modified. CHAPTER 4 DISASSEMBLY AND ASSEMBLY • 4.1.5 Stylus PHOTO RX600/610, RX620/630 Disassembly (p.40) is modified. • 4.5 Disassembly and Assembly of Printer Unit (p.50) is modified. •...
1.1.1 Basic Functions Copy Mode Margin Feature Standard copy Normal copy The functions of EPSON Stylus PHOTO RX600/610, RX620/630 are as described Full copy with no margin BorderFree copy below: 1.5mm Margins are 1.5 mm in four sides Small margin copy...
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C Compatible to various memory cards. 1.2 Common Compact Flash / Microdrive The specifications described below are common to the scanner and printer. Smart Media / xD-Picture Card Memory Stick / MagicGate Memory Stick / Memory Stick PRO / 1.2.1 Electrical Specifications...
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 1.2.7 Weight and Overall Dimensions 1.3 Ink Cartridge Weight: Type: Special ink cartridge 10.0 kg (Excluding ink cartridge) Suggested effective period: Period described on the product package, Overall Dimensions (mm): or six months after opening.
EPSON Stylus PHOTO RX600/610, RX620/630. Paper Eject Unit Stylus PHOTO RX600/610, RX620/630 mainly, basically consists of a printer and a scanner. The mechanism can be divided into the printer and the scanner. The electric circuit includes the Main Board circuit, Power Supply Board circuit, scanner carriage circuit and control panel circuit.
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 2.2.1.1 Carriage Motor Specification 2.2.1.4 PW Detector Specification Stylus PHOTO RX600/610, RX620/630 has newly employed a PW (Paper Width) Table 2-1. CR Motor Specification sensor that is described in detail below. Item Specifications...
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C Controlling of each detection 2.2.2 Scanner Mechanism Table 2-3. The scanner consists of the Scanner Carriage Unit comprising the CCD for capturing images and the light source for illuminating the document, the Scanner Motor and...
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 2.3.1 C543 Main Circuit Board Table 2-4. Main Element location Function 2.3.1.1 Feature • Built-in NA85E2C core USB 2.0 with multi-end points allows high speed SPC without HUB • Built-in iLB RAM 12Kbyte, Built-in dLB RAM 4Kbyte...
Monitor 3” installed on the host personal computer. The power supply voltage must be within the specification limits. (Measure the Once an error occurs, the “EPSON Status Monitor 3” will appear as a pop-up window voltage at the wall socket.) on the screen of the host PC.
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 3.2 Troubleshooting at Unit Level Table 3-1. LCD Indication LCD Indication LED Indication By following this troubleshooting procedure, when some trouble has occurred, you can Error Status Error Power easily identify the unit which is the cause of the trouble, from its observation. Table 3-1 Table 3-2 list the observations of various troubles.
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 3.2.1 Printer / Scanner does not operate at all Table 3-2. Observations and Troubleshooting Flowcharts even with power turned on Observation Details Refer to Power is on but not • LED does not turn on at all.
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 3.2.2 Error is detected 3.2.3 Trouble related to Print Start Start Execute test printing Check error contents by LCD (See Table 3-1). Printing was successfully done? Turn power off, unlock CR and move CR with...
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 3.2.4 Paper feeding is not normally carried out 3.2.5 Operation Panel faulty Start Start Operation Paper is Panel is connected correctly set in properly with ASF? cable? Set paper correctly. Connect correctly Operation panel again.
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 3.3 Troubleshooting for Printer Table 3-3. Printer Errors (continued) Observation Cause Remedy This section describes repair / service of the Printer Mechanism. Listed below are Ink cartridge out • If Ink cartridge is not correctly •...
Page 26
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C Troubleshooting without error display on LCD. For Items and pages, refer the following: • Faulty pump mechanism (p26) • Ink is not absorbed at all or ink absorption is poor. (p26) • Faulty carriage operation (p27) •...
Page 27
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C Faulty carriage operation Table 3-6. Diagnostics when carriage action is abnormal Condition Cause Check Point Remedy When power is turned on, There is an obstacle in CR shift area. Check with the naked eye whether there is an obstacle.
Page 28
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C Faulty print Table 3-8. Diagnostics when printing is abnormal Condition Cause Check Point Remedy Faulty printing occurs at Head surface is dirty. Repeat cleaning and test printing alternately several times. Clean with a swab fixed to a stick.
Page 29
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C Table 3-8. Diagnostics when printing is abnormal (continued) Condition Cause Check Point Remedy White line appears in output Dirt is adhering to CR guide shaft. Check whether dirt is adhering to the surface of CR guide Clean the surface of CR guide shaft with a dry and soft cloth.
Page 30
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C Faulty paper loading Table 3-9. Diagnostics when feeder is abnormal Condition Cause Check Point Remedy Paper is not loaded. Paper loading roller worn Check whether paper loading roller rotates when paper Clean the paper loading roller with the cleaning sheet. If this feeding is not operating.
Page 31
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C Printer stops during initialization Table 3-11. Diagnostics when printer stops during format Condition Cause Check Point Remedy Printer error is indicated. Faulty PE sensor Check PE sensor signal level. Replace the PE sensor (Refer to Table 3-22 “Sensor Check”...
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 3.4 Troubleshooting for Scanner Observation of Trouble and Reference for Remedy Table 3-13. Observation of Trouble and Reference for Remedy This section describes repair / service for the Scanner mechanism. In troubleshooting, Reference for first the trouble is identified at the unit level based on the observation.
Page 33
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C Carriage unit does not operate Fluorescent lamp does not turn on Table 3-15. Carriage unit does not operate Table 3-17. Fluorescent lamp does not turn on Cause Check Point Yes/No Remedy Cause Check Point...
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 3.6 Troubleshooting for Motors and Sensors Motor Resistance and Check Point Table 3-21. Motor Resistance and Check Point Section Motor Name Location Check Point Printer CR motor CN11 Pin 1 & 3 (Main board)
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 4.1 Overview 4.1.1 Precautions See the precautions given under the handling “WARNING” and “CAUTION” in the This section describes procedures for disassembling the main components of the following column before disassembling and assembling the product.
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 4.1.3 Screws Use only recommended tools for disassembling, assembling or C A U T I O N Table 4-2. Screws adjusting the printer. Description Appearance Observe the specified torque when tightening screws. CBP-Tite *x* F/Ni Apply lubricants and adhesives as specified.
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 4.1.4 Service Dispatch Standard Table 4-3. Check List (continued) Classification Part Check item Check column When this machine is completely repaired and returned to the user, confirm finally Lubrication Designated Lubrication is done at designated according to Check list in Table 4-3.
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 4.1.5 Stylus PHOTO RX600/610, RX620/630 Disassembly The flowchart below shows step-by-step disassembly procedure. When disassembling each component, refer to the page number shown in the figure. 4.2 Main Unit Removal (p.41) Disassembly and Assembly of Main Unit START 4.6 Disassembly and Assembly of Other Parts (p.60)
Disconnect a panel harness (CN8) to the panel unit from the main board. C.B.P Tite 3x10,F/ZN ⋅ Tightening torque:0.6 ± 0.1 N Remove a the panel unit from the Stylus PHOTO RX600/610, RX620/630 unit. Front Housing Decorative Panel Hook Figure 4-1. RX600/610 Panel Unit Removal...
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 4.2.2 Scanner Unit Removal C.B.P.Tite 3x8,F/ZN ⋅ Tightening torque:0.6 ± 0.1 N Panel Unit Removal. (p41) Scanner Unit Remove one screw that secures the FFC cover. Remove the FFC cover from the middle housing.
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 4.2.3 Middle Housing Removal C.B.P Tite 3x10,F/ZN ⋅ Tightening torque:0.6 ± 0.1 N Scanner Unit Removal. (p42) Middle Housing Remove all connectors from the main board. Remove one screw that secures a tube cover, and remove it from the printer unit.
Page 44
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C Pay attention when handling the connector while installing the middle housing. After installing the Middle Housing, remove the Tube Cover once and make certain that the tube is inserted into the Porous Pad properly.
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 4.3 Disassembly and Assembly of Panel Unit 4.3.1 Panel Circuit Board Removal Panel Unit Removal. (p41) Front Middle Cover Remove one screw that secures the grounding plate. Remove the grounding plate from the panel shield plate.
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 4.3.2 LCD ASSY Removal C.B.P Tite 3x10,F/ZN ⋅ Tightening torque:0.6 ± 0.1 N Remove the one screw securing the right bush. LCD ASSY. Clutch Spring Remove the right bush from the front middle cover.
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 4.4 Disassembly and Assembly of Scanner Unit Perform disassembly and assembly for the scanner unit in an C A U T I O N environment free from dust. You are advised to work in a clean room or on a clean bench, if possible.
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 4.4.1 Upper Housing Assembly Removal TPU Assembly Scanner Unit Removal. (p42) Remove the TPU assembly. Remove four hinge screws. Remove a hinge from the scanner unit. Unlock the carriage. Remove eight screws on bottom of the scanner unit.
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 4.4.2 CCD Module Timing Clamp Timing Belt Upper Housing Assembly Removal. (p48) Remove a driven pulley from a timing belt by pressing the driven pulley Assembly C.B.P Tite 3x8,F/ZN ⋅ Tightening torque:0.7 ± 0.1 N to loose tension of a timing belt.
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 4.5 Disassembly and Assembly of Printer Unit Carriage concerned START Paper feeding concerned Other parts Panel Unit Removal (p.41) Scanner Unit Removal (p.42) Middle Housing Removal (p.43) CR Scale (p51) ASF Unit Removal (p55)
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 4.5.1 CR Scale Extension Spring, CR Scale When handling the CR scale, hold both ends, or top and bottom C A U T I O N only. Do not touch the reading surface. Pay attention to keeping out of stains or scratches on the reading surface.
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 4.5.2 Carriage Unit C.B.S Tite R 3x4,F/ZN Tightening torque Ffc Holder Middle Housing Removal. (p43) ⋅ :0.8 ± 0.1 N CR Scale Removal. (p.51) C.B.S Tite 3x6,F/ZN ⋅ Remove two screws on the left side of the FFC holder, and remove it from the Tightening torque:0.5 ±...
Page 53
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C Remove the CR belt from the CR motor. Remove a torsion spring from the carriage unit, and remove the carriage lever from right side. Unhook nine locations that secure the carriage unit to the head cable cover, and Carriage remove the head cable cover.
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 4.5.3 Printhead Carriage Unit Removal. (p52) Remove the Head Cable from the CSIC board, then remove the Head Cable from Head Cable the Holder I/C. Remove the Printhead and Carriage from the Holder I/C.
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 4.5.4 ASF Unit Removal ASF Unit Middle Housing Removal. (p43) C.B.S TITE (P4) R 3x6,F/ZN Remove three screws that secure the ASF unit. ⋅ C.B.S 3x6,F/ZN Tightening torque:0.8 ± 0.1 N Tightening torque Remove the ASF unit from the main frame upward.
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 4.5.5 Disassembly of ASF Unit Several types of spring are used for the ASF unit. Do not loose C A U T I O N springs during disassembly and assembly. Middle Housing Removal. (p43) ASF Unit Removal.
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 4.5.6 Power Unit Middle Housing Removal. (p43) C.B.P Tite 3x8,F/ZN Tightening torque ⋅ ASF Unit Removal. (p55) :0.6 ± 0.1 N Disconnect both power units and the TPU holder assembly lead from the FFC holder on the left side of the printer.
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 4.5.9 Waste Liquid Pad C.B.P TITE 3x8, F/ZN SCREW, FRAME MAIN ⋅ Tightening torque:0.6 ± 0.1 N Tightening torque ⋅ Power Unit Removal. (p57) :0.6 ± 0.1 N Front Paper Guide Removal. (p58) Remove 4 screws that secure the Printer Unit.
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 4.6 Disassembly and Assembly of Other Parts 4.6.1 Damper Assembly Panel Unit Removal. (p41) Main Board Unit Removal. (p.61) (as needed) Remove a screw that secures the damper assembly, and remove it from the middle housing.
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 4.6.3 Main Board Unit C.B.P Tite 3x10,F/ZN C.B.P Tite 3x10,F/ZN ⋅ Tightening torque Tightening torque:0.5 ± 0.1 N If you can read EEPROM on the main circuit board before C H E C K ⋅...
Page 62
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C Table 4-4. CN No. Color Pins Connection Point White Power Unit (FFC) CCD Module White TPU Inlet Holder Scanner Motor White HP sensor circuit board (FFC) Panel circuit board CN10 White Detector circuit board...
Page 63
C H A P T E R ADJUSTMENT Download Service Manual And Resetter Printer at http://printer1.blogspot.com...
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 5.1 Overview This Chapter describes the necessary adjustment items and adjustment procedures for applicable Unit / Parts. This section shows details of each Adjustment Process according to Adjustment Program. Adjustment Information for each Printer Mechanism needs to be set for this product in order to maintain reliable printing function and print quality for each printer mechanism.
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 5.1.1 Adjustment Items for Individual Units and Components The adjustment items for this product are as indicated below. When performing any of these adjustments, be sure to execute all the related items so that this product operates normally.
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 5.2 Adjustments by Adjustment Program Click the [OK] button. While Stylus PHOTO RX600/610, RX620/630 is warming up C H E C K 5.2.1 Overview P O I N T (Power LED is flashing), you cannot run the program (a communication error occurs).
Functions of buttons [OK] : In the bottom center area on the screen, a message appears to indicate that the initial setting values of Stylus PHOTO RX600/610, RX620/630 have been written. [Check] : You can check the current destination setting of the printer.
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 5.2.2.2 USB ID A specific USB ID is stored in EEPROM on the Main Board. Therefore, it is required to input a USB ID when you have replaced the Main Board with a new one.
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 5.2.2.3 Head ID With this function, write the head ID in EEPROM, and check the current setting value. This adjustment compensates for the uneven discharge of ink to keep the printing quality at a constant level. An irregularity occurs in the printing density unless a proper ID is input.
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 5.2.2.5 1st Dot Position Adjustment This adjustment corrects the left margin (Print start position) for post card printing and A4 printing. The value indicated at the center of the adjustment window is the current value recorded in EEPROM.
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 5.2.2.6 Bi-D Adjustment This adjustment corrects the deviation of printing timing for bidirectional printing which can occur due to variation of assembly precision/component parts of the Printer Mechanism. Print the Bi-D pattern and make adjustment so that the pattern is printed properly.
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 5.2.2.7 PW Adjustment The PW sensor is installed on the bottom of the Carriage Unit (refer to p.16). Make adjustment so that the program compensates for a dislocation of the Carriage Unit resulting from its removal or replacement, and write the adjustment value in EEPROM.
Since Stylus PHOTO RX600/610, RX620/630 does not include CR guide shaft, do not place a check in CR guide shaft. In this adjustment, the load on the mechanism is calculated, by conversion, from the current in the CR Motor.
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 5.2.3 Maintenance This section describes the maintenance items of the adjustment program. 5.2.3.1 Head cleaning You can execute more intensive cleaning than Head Cleaning, which is carried out by selecting it in the menu on the Operation Panel. This function releases the Head Nozzle from clogging which can cause dot missing.
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 5.2.3.3 Refurbishment For DOA If you clean the cavity of the printhead and cap assembly, this function will be useful. After carry out this function, replace the waste drain ink pad C A U T I O N with new one and reset the Waste drain ink pad counter.
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 5.2.3.5 EEPROM data copy The function is to back up → restore (to the new Main Board) the adjustment values that have been stored in EEPROM on the Main Board. Use of this function will reduce the man-hour for adjustment significantly.
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 5.2.4 Check Pattern print This operation prints various adjustment patterns. The patterns for the adjustment items are printed en bloc for each paper type. After printing the adjustment patterns, if any abnormal pattern is...
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 5.2.5 Appendix 5.2.5.1 Save all of EEPROM data This function copies all the data in EEPROM into a file. Use this function at the analysis of the product. Figure 5-20. Save All of EEPROM Data Screen...
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 5.3 Firmware Uploading IPL update progress display The following is the status change sequence of normal Firmware update. IPL allows you to update Firmware in the SPC model. Following is the procedure. Table 5-3. IPL Update Progress Display List 5.3.1 Firmware Program File...
Page 80
C H A P T E R MAINTENANCE Download Service Manual And Resetter Printer at http://printer1.blogspot.com...
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 6.1 Overview 6.2 Cleaning This section describes maintenance work to maintain the functions and performance of Clean if dirt is visible. As dirt on the glass for placing the document affects directly this product.
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 6.3 Lubrication Cr Shaft 6.3.1 Designated Lubricant Table 6-1. Designated Lubricant Type Name Parts Code Available Grease G-26 1080614 EPSON Grease G-58 1082176 EPSON G-26 6.3.2 Lubrication Points of the Scanner When any part of the CR Unit of the scanner has been replaced or the sound of carriage moving is loud, lubrication is necessary.
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 6.3.3 Lubrication Points of the Printer The types and amount of the oils and grease for lubrication of the Printer are determined based on factory evaluation. Therefore, be sure to apply a specified volume of the designated grease to each designated point for repair and maintenance of the Printer.
Page 84
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C Main Frame Main Frame Main Frame G-58 Table 6-5. Designated Lubrication Points Assy to be Lubricated Lubrication Points / Precautions (Reference Page) Amount of Application (Fig No.) • Use lubrication jig Lubrication Points...
Page 85
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C Carriage Unit Table 6-6. Designated Lubrication Points Assy to be Lubricated Lubrication Points / Precautions <Rear View> (Reference Page) Amount of Application (Fig No.) Lubrication Points Upper contact area of the guide roller and the guide holder...
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 7.1 Connectors 7.1.1 Connector Assignments Figure below shows the connector assignments on the circuit boards of Stylus PHOTO RX600/610, RX620/630. Table 7-1. CN No. Color Pins Connected to USB2.0 White Power Unit (FFC)
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 7.3 Electric Circuit Diagrams This section shows electric circuit diagrams of Stylus PHOTO RX600/610, RX620/ 630. The electric circuits of Stylus PHOTO RX600/610, RX620/630 are provided on the following circuit boards: C543 MAIN Board C543 Panel Board...
Page 90
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C C543MAIN-1.pdf Appendix Electric Circuit Diagrams...
Page 91
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C C543MAIN-2.pdf Appendix Electric Circuit Diagrams...
Page 92
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C C543MAIN-3.pdf Appendix Electric Circuit Diagrams...
Page 93
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C C543pnl.pdf Appendix Electric Circuit Diagrams...
Page 94
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C C543psb_G.pdf Appendix Electric Circuit Diagrams...
Page 95
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C C543pse_G.pdf Appendix Electric Circuit Diagrams...
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C 7.5 ASP List Table 7-2. ASP List (continued) Ref No. Part Name This section shows the ASP list of Stylus PHOTO RX600/610, RX620/630. STOPPER,CR COVER,MIDDLE,REAR;EPAG Table 7-2. ASP List OPERATION PANEL;EN PANEL ASSY.,EBM;B Ref No.
Page 104
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C Table 7-2. ASP List (continued) Table 7-2. ASP List (continued) Ref No. Part Name Ref No. Part Name COVER,HOST,USB;EBM EXTENSION SPRING,1.494 LABEL,CARD,SROT MOTOR,ASSY.,CR I/F CABLE SHEET,PROTECT,SPLASH FERRITE,CORE,FRC-25-12-5-E COMPRESSION SPRING,2.36 DOUBLE SIDE TAPE,10x40 LEVER,I/C C.B.P.
Page 105
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C Table 7-2. ASP List (continued) Table 7-2. ASP List (continued) Ref No. Part Name Ref No. Part Name POROUS PAD,INK EJECT,LOWER LEFT;B HOUSING,LOWER,TPU POROUS PAD,INK EJECT,UPPER RIGHT;B HOUSING,MAT POROUS PAD,INK EJECT,LOWER RIGHT;B MAT,COVER,DOCUMENT POROUS PAD,PUMP,LOWER HOUSING ASSY.,UPPER,ASP...
Page 106
EPSON Stylus PHOTO RX600/610, RX620/630 Revision C Table 7-2. ASP List (continued) Ref No. Part Name C.B.P.SCREW,4x12,F/ZN SHEET,HOLDER ASSY.,PULLEY,DRIVE C.B.P-TITE SCREW,3x12,F/ZN DOUBLE SIDED TAPE,27x10x0.16 FOOT POWER SUPPLY ASSY.;120V NON FIG INK SUPPLY FIXTURE Appendix ASP List...