Pioneer SX-316-S Operating Instructions

Audio multi-channel receiver

Hide thumbs Also See for SX-316-S:

Service manual (94 pages)

Operating instructions manual (30 pages)

Specifications (1 page)

page of 2

/ 2
Bookmarks

Available languages

Quick Links

Download this manual

Front panel

Remote control

RECEIVER

SLEEP

DIMMER ANALOG ATT

INPUT SELECTOR

DVD

DVR

RECEIVER

F.AUDIO

ADVANCED

ST/DIRECT/

STANDARD

SURR

AUTO SURR

DVD/LD

CD-R

LISTENING MODE

MIDNIGHT/

STANDARD ADV.SURR STEREO

LOUDNESS

ANALOG

MIDNIGHT/

DIMMER

ATT

LOUDNESS

STANDBY / ON

TOP MENU

PHONES

TUNER

MUTE

TONE

EDIT

SETUP

DIALOG E

ENTER

ONE

TOUCH

COPY

TUNER EDIT

S.RETRIEVER

RETURN

VOLUME

EFFECT/CH SEL

LEVEL

MUTE

PHONES jack

DVD/DVR

HDD

DVD

SUBTITLE

DIMMER

GUIDE

REC

AUDIO

TIMER REC

INFO

REC STOP

JUKEBOX

DVD/DVR

DISPLAY

CLASS

MUTE

SHIFT

MPX

TUNING

STATION

TUNER

RECEIVER

Display

Note

Keep in mind the following when using the

remote control:

• Make sure that there are no obstacles between

the remote and the remote sensor on the unit.

• The remote has a range of about 7m.

• Remote operation may become unreliable if

strong sunlight or fluorescent light is shining on

the unit's remote sensor.

• Remote controllers for different devices can

interfere with each other. Avoid using remotes

for other equipment located close to this unit.

• Replace the batteries when you notice a fall off

Character display

in the operating range of the remote.

Using the Quick Setup

Important

You can use the Quick Setup to get your

• Certain features explained in this section will

system up and running with just a few button

not be possible depending on the source (for

presses. The receiver automatically makes

example, PCM 88.2 kHz / 96 kHz, DTS 96kHz (24

the necessary settings after you have

bit) or WMA 9 Pro sources).

selected your room size and listening

Auto playback

position.

The simplest, most direct listening option is the

If you want to make more specific settings,

refer to The System Setup menu.

Auto Surround feature. With this, the receiver

Use the front panel controls for the steps

automatically detects what kind of source you're

below.

playing and selects multichannel or stereo

1 Press

STANDBY/ON to switch on.

playback as necessary.

2 Press QUICK SETUP.

• While listening to a source, press STEREO

3 Use the MULTI JOG dial to choose your

for auto playback of a source.

room size.

Press repeatedly until AUTO SURR. shows briefly

Depending on the distance of your speakers

in the display (it will then show the decoding or

from the listening position, choose between

playback format). Check the digital format

small, medium, or large (S, M or L), M being

indicators in the display to see how the source is

an average-sized room.

being processed.

4 Press ENTER.

Note

5 Use the MULTI JOG dial to choose your

• Stereo surround (matrix) formats are decoded

listening position.

accordingly using 2 Pro Logic II MOVIE.

You can cycle between the following choices:

• The Auto Surround feature is canceled if you

• FWD — If you are nearer to the front

connect headphones or select the multichannel analog

speakers than the surround speakers

inputs.

• MID — If you are equal distance from the

Listening in surround sound

front and surround speakers

• BACK — If you are nearer to the surround

Using this receiver, you can listen to any source

speakers than the front speakers

in surround sound. However, the options

6 Press ENTER to confirm your setup.

available will depend on the type of source you're

The display shows the room size and listening

listening to.

position that you have selected.

• While listening to a source, press STANDARD.

If the source is Dolby Digital, DTS, or Dolby

Surround encoded, the proper decoding format

Making receiver settings from

Note

• If you are using a Sound Pressure Level (SPL) meter,

the System Setup menu

take the readings from your main listening position

The following section shows you how to make

and adjust the level of each speaker to 75 dB SPL (C-

detailed settings to specify how you're using the

weighting/slow reading).

receiver and also explains how to fine-tune

• The subwoofer test tone is output at low volumes.

individual speaker system settings to your liking.

You may need to adjust the level after testing with an

1 Press RECEIVER on the remote control, then

actual soundtrack.

press the SETUP button.

Speaker Distance

2 Use

to select the setting you want to

1 Select 'SP DISTN.' from the SP SETUP

adjust then press ENTER.

menu.

• SP SETUP allows you to specify the distance

2 Use

and balance of the speakers you've connected:

want then set the distance.

CH LEVEL — Adjust overall balance of your

Use

speaker system.

speaker (in 0.5 feet increments).

SP DISTN. — Specify the distance of your

3 When you're finished, press RETURN.

speakers from the listening position.

Tip

• OTHER allows you to make customized settings

• For best surround sound, make sure the

to reflect how you are using the receiver.

surround back speakers are the same distance

DRC — This setting specifies the amount of

from the listening position.

dynamic range adjustment to Dolby Digital

and DTS movie soundtracks (use this when

Dynamic Range Control Setup

listening to surround sound at low volumes).

• Default setting: OFF

DUAL MONO — You can specify how dual

1 Select DRC from the OTHER setup menu.

mono encoded Dolby Digital soundtracks

2 Use

should be played (dual mono is sometimes

want.

used when two languages need to be sent to

• OFF — No dynamic range adjustment (use

separate channels).

when listening at higher volume).

LFE ATT — Some Dolby Digital and DTS

• MID — Mid setting.

audio sources include ultra-low bass tones.

• MAX — Dynamic range is reduced (loud

Set the LFE attenuator as necessary to

sounds are reduced in volume while quieter

prevent the ultra-low bass tones from

sounds are increased).

distorting the sound from the speakers.

3 When you're finished, press RETURN.

Channel level

Dual Mono Setup

1 Select CH LEVEL from the SP SETUP menu.

• Default setting: CH1

2 Use

to select a setup option.

1 Select DUAL MONO from the OTHER setup

• T. TONE M. — Move the test tone manually

menu.

from speaker to speaker and adjust individual

2 Use

channel levels.

want.

• T. TONE A. — Adjust channel levels as the test

• CH1 — Only channel 1 is played

tone moves from speaker to speaker

• CH2 — Only channel 2 is played

automatically.

• CH1 CH2 — Both channels are played

3 Confirm your selected setup option.

through the front speakers

The test tones will start after you press ENTER.

3 When you're finished, press RETURN.

After the volume increases to the reference level,

Note

test tones will be output.

• This setting works only with dual mono

4 Adjust the level of each channel using

encoded Dolby Digital and DTS soundtracks.

If you selected T. TONE M., use

to switch

speakers.

LFE Attenuator Setup

The T. TONE A. setup will output test tones in the

• Default setting: ATT 0 dB

following order:

1 Select LFE ATT from the OTHER setup menu.

2 Use

want.

Adjust the level of each speaker as the test tone is

• LFEATT 0 — No limiting (recommended

emitted.

setting)

5 When you're finished, press RETURN.

• LFEATT 10 — 10 dB of limiting

Tip

• LFEATT ** — No sound from LFE channel

• You can change the channel levels at any time

3 When you're finished, press RETURN.

by using EFFECT/CH SEL and +/– on the remote.

Resetting the main unit

Use this procedure to reset all the receiver's settings to the factory default. Use the front panel controls to do

this.

1 Switch the receiver into standby.

2 While holding down the TONE button, press and hold the

seconds.

3 When you see 'RESET?' appear in the display, press the ENTER button.

OK? shows in the display.

4 Press SETUP to confirm.

OK appears in the display to indicate that the receiver has been reset to the factory default settings.

Display

ENTER

MULTI JOG dial

AUDIO MULTI-CHANNEL RECEIVER

SX-316

MULTI JOG

ENTER

VSB

DIALOGUE

TV / SAT

DVR

CD-R / TAPE / MD

FRONT AUDIO

TUNING

STATION

MPX

MODE

ENHANCEMENT

MASTER

SLEEP

VOLUME

QUICK

SETUP

RETURN

SETUP

FRONT

AUDIO INPUT

MULTI JOG

DOWN

FRONT AUDIO INPUT

ANALOG

MIDNIGHT/

ATT

LOUDNESS

SLEEP

VSB

DIALOGUE

MPX

MODE

ENHANCEMENT

TUNER

QUICK

EDIT

TONE

SETUP

RETURN

MULTI JOG

23 24 25 26

28 29 30

34 35

Master volume level

will automatically be selected and shows in the

display.

With two channel sources, press STANDARD

repeatedly to select from:

• 2 Pro Logic II MOVIE — Up to 5.1 channel

sound, especially suited to movie sources

• 2 Pro Logic II MUSIC — Up to 5.1 channel

sound, especially suited to music sources

• 2 Pro Logic II GAME — Up to 5.1 channel

sound, especially suited to video games

• 2 PRO LOGIC — 5.1 channel surround sound

Using the Advanced surround effects

Try different settings with various soundtracks to see

which you like.

• Press ADV.SURR.(ADVANCED SURROUND)

repeatedly to select a listening mode.

• ADV. MOVIE — Suitable for movie sources.

• ADV. MUSIC — Suitable for music sources.

• TV SURR. — Provides surround sound for both

mono and stereo TV sources.

• SPORTS — Suitable for sports programs.

• ADV. GAME — Suitable for video games.

• EXPANDED — Simulates multichannel surround

sound for two-channel sources.

• EX.POWER (Extra Power) — Gives multichannel

sound to a stereo source, using all of your speakers.

• VIR. SURR — A virtual surround effect using just

the subwoofer and front speakers.

• PHONESUR. (Phones Surround) — Creates the

effect of overall surround with headphones.

Note

Use with Dolby Pro Logic for a stereo surround

•

effect (stereo field is wider than Standard modes

with Dolby Digital sources).

Listening to the radio

The following steps show you how to tune in to FM and AM radio

broadcasts and memorize the frequency for recall later.

1 Press AM or FM to select the tuner band.

2 Tune to a station.

There are three ways to do this:

• Automatic tuning — Press and hold TUNING +/– for about a

second. Searching automatically stops at the next station.

• Manual tuning — To change the frequency one step at a time,

press TUNING +/–.

• High speed tuning — Press and hold TUNING +/– continuously.

If the signal is weak, press the MPX button to switch the receiver

to choose the speaker that you

into mono reception mode.

to adjust the distance of each

Saving station presets

This receiver can memorize up to 30 stations, stored in three banks

of 10 stations each.

1 Tune to a station you want to memorize.

2 Press TUNER EDIT to select 'ST. MEMORY'.

3 Press CLASS to select one of the three classes then press

STATION (+/–) to select the station preset you want.

You can also use the MULTI JOG dial after pressing STATION (front

panel) to select station presets.

4 Press ENTER to store the station.

Note

to choose the setting that you

• When saving an FM frequency, the MPX setting is also stored.

Troubleshooting

Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check

the points below. Take a look at the other components and electrical appliances being used, because sometimes the problem may lie there. If

the trouble isn't sorted out even after going through the checks below, ask your nearest Pioneer authorized independent service company to

carry out repair work.

Note

If the unit does not operate normally due to external effects such as static electricity, disconnect the power plug from the outlet and insert

again to return to normal operating conditions.

to choose the setting that you

Problem

The power does not turn on.

No sound is output when a function is

selected.

No image is output when a function is

selected.

to choose the setting that you

Considerable noise in radio broadcasts.

Broadcast stations cannot be selected

automatically.

No sound from surround or center

speakers.

No sound from subwoofer.

Noise during playback of a cassette deck.

No sound is output or a noise is output

when software with DTS is played back.

STANDBY/ON button for about three

During a playback search, noise is output

from a DTS compatible CD player.

Can't operate the remote

control.

The display is dark or off.

Operating Instructions for the SX-316-S Audio Multi-Channel Receiver

1 RECEIVER

(STANDBY/ON )

10 MIDNIGHT/LOUDNESS

Switches the receiver between standby and on.

These features give you good sound at low volume

2 Listening mode buttons

levels when listening to movie (Midnight) or music

STANDARD

(Loudness) sources. Press to switch between

Press for Standard decoding and to switch between

MIDNIGHT, LOUDNESS, and OFF.

Pro Logic II options.

11 MENU

ADV.SURR.

Displays the disc menu of DVD-Video discs.

Switches between the various surround modes.

DIALOG E (DIALOGUE ENHANCEMENT)

STEREO

This feature localizes dialog in the center channel to

Switches between direct and stereo playback. Direct

make it stand out from other background sounds in a

playback bypasses the tone controls for the most

TV or movie soundtrack.

/ENTER

accurate reproduction of a source. Also selects the

Auto Surround mode.

13 RETURN

3 TOP MENU

Confirm and exit the current menu screen.

Displays the disc 'top' menu of a DVD disc.

ONE TOUCH COPY

SETUP

Copies the currently playing title from DVD to HDD or

Press to access the System Setup menu.

vice-versa.

4 TUNER EDIT

14 MUTE

Press to memorize and name a station for recall. Also

Mutes/unmutes the sound.

functions as the SETUP button for DVD/DVR units.

15 DVD/DVR control buttons

S. RETRIEVER

You can use these buttons to control a Pioneer DVD

Press to restore CD quality sound to compressed

player or recorder connected to your system.

audio sources.

5 (MASTER) VOLUME +/–

Button

What it does

Use to set the listening volume.

6 EFFECT/CH SEL

Turns DVD player or recorder power on/off.

DVD/DVR

Press repeatedly to select a channel, then use LEVEL

AUDIO

Changes the audio language or channel.

+/– to adjust the level. Also selects the Advanced

SUBTITLE

Displays/changes the subtitles on

Surround effect level (use LEVEL +/– to adjust).

multilingual DVD-Video discs.

LEVEL +/–

Use to adjust the effect and channel levels.

CH +/–

Switches channels.

7 SHIFT

Starts/resumes normal playback.

Press to access commands in a rectangle (above the

Pauses/unpauses a disc.

buttons) on the remote. These buttons are marked

Stops playback.

with an asterisk (

) in this section.

8 SLEEP

Press to start fast reverse scanning.

Press to change the amount of time before the

Press to start fast forward scanning.

receiver switches into standby (30 min - 60 min - 90

Skips to the start of the current track or

min - Off).

chapter, then previous tracks/chapters.

DIMMER

Skips to the next track or chapter.

Dims or brightens the display.

ANALOG ATT

HDD/DVD

Switch between the hard disk and DVD

controls for DVD/HDD recorders.

Attenuates (lowers) the level of an analog input signal

to prevent distortion.

GUIDE

Displays the guides on a DVD recorder.

9 INPUT SELECTOR buttons

ìREC

Starts recording.

Press to select an input source (press DVD/DVR to

TIMER REC

Accesses the timer recording menu.

use the DVD player/recorder controls on the remote).

RECEIVER

INFO

Displays additional EPG information.

Use to switch to the receiver controls on the remote

REC STOP

Stops recording.

control. Also used when setting up the surround

JUKEBOX

Switches to the Jukebox feature.

sound for the receiver.

Setting the effect options

When using surround effects, there are a number of

settings you can adjust.

1 Press EFFECT/CH SEL repeatedly to select the

setting you want to adjust.

Depending on the current status / mode of the

receiver, certain options may not appear. Check the

table below for notes on this.

2 Use the LEVEL+/– buttons to set it as necessary.

See the table below for the options available for each

setting. The defaults, if not stated, are listed in bold.

3 Press EFFECT/CH SEL again to adjust other

settings.

Setting

What it does

Center Width*

Spreads the center channel

between the front right and

left speakers, making it sound

wider (higher settings) or

narrower (lower settings).

Dimension*

Adjusts the surround sound

balance from front to back,

making the sound more

distant (minus settings), or

more forward (positive

settings).

Panorama*

Extends the front stereo image

to include surround speakers

for a 'wraparound' effect.

Effect

Sets the effect level for the

currently selected Advanced

Surround mode (each mode

can be set separately).

* Only available with 2ch sources in Dolby Pro Logic II

Music mode.

Naming station presets

You can your station presets for easy recall.

1 Choose the preset you want to name.

See Listening to station presets below.

2 Press TUNER EDIT to select 'ST. NAME'.

A cursor appears at the first character position.

3 Input the name you want then press ENTER.

Use the MULTI JOG dial (front panel) or the STATION +/- buttons

(remote) to select characters, and ENTER to confirm. If no

character is input, a space is input.

Tip

• Once you have named a station preset, you can press DISPLAY when

listening to a station to switch the display between the name and the

frequency.

Listening to station presets

You will need to have some presets stored to do this. See Saving

station presets if you haven't done this already.

1 Press AM or FM to select the tuner.

2 Press CLASS to select the class in which the station is

stored.

Press repeatedly to cycle through classes A, B and C.

3 Press STATION +/– to select the station preset you want.

Remedy

• Connect the power plug to the wall outlet.

• Disconnect the power plug from the outlet, and insert again.

• Make sure there are no loose strands of speaker wire touching the rear panel. This could

cause the receiver to shut off automatically.

• If the power shuts off automatically, take the unit to your nearest Pioneer authorized service

center or your dealer for servicing.

• Make sure the component is connected correctly.

• Press MUTE on the remote control to turn muting off.

• Adjust the MASTER VOLUME.

• Make sure the component is connected correctly.

• Select the correct component (use the INPUT SELECTOR buttons).

• Tune in the correct frequency.

• Connect the antenna and adjust the direction and position for best reception.

• Route any loose cables away from the antenna terminals and wires.

• Fully extend the FM wire antenna, position for best reception, and secure to a wall.

• Connect an outdoor FM antenna.

• Connect an additional internal or external AM antenna.

• Turn off the equipment causing the noise or move it away from the receiver.

• Move antennas farther away from equipment causing the noise.

• Connect an outdoor antenna.

• Connect the speakers properly.

• Refer to Channel level to check the speaker levels.

• The Dolby Digital or DTS source you are listening to may not have an LFE channel.

• Switch the LFE Attenuator Setup to LFEATT 0 or LFEATT 10.

• Move the cassette deck further from your receiver, until the noise disappears.

• Set the digital volume level of the player to full, or to the neutral position.

• This is not a malfunction, but be sure to turn the volume down to prevent the output of loud

noise from your speakers.

• Replace the batteries.

• Operate within 23 ft. (7 m), 30 of the remote sensor on the front panel.

• Remove the obstacle or operate from another position.

• Avoid exposing the remote sensor on the front panel to direct light.

• Press DIMMER on the remote control repeatedly to return to the default.

16 TUNER controls

The TUNING +/– buttons can be used to find radio

frequencies and the STATION +/– buttons can be used

to select preset radio stations.

DISPLAY

Switches the display between station preset name and

frequency.

CLASS

Switches between the three banks (classes) of station

presets.

17 MPX

Use to switch between auto stereo and mono reception

of FM broadcasts. If the signal is weak then switching to

mono will improve the sound quality.

18 VSB MODE

Selects the Virtual Surround Back (VSB) mode.

19 TONE

Press this button to access the bass and treble controls,

which you can then adjust with the MULTI JOG dial.

20 QUICK SETUP

21 SIGNAL indicators

Lights to indicate the type of input signal assigned for

the current component:

DIGITAL

Lights when a digital audio signal is detected.

2 DIGITAL

Lights when a Dolby Digital encoded signal is detected.

DTS

Lights when a DTS encoded audio signal is detected.

ANALOG

Lights when an analog signal is detected.

When the STANDARD mode of the receiver is on, this

lights to indicate decoding of a DTS multichannel

signal.

23 2 DIGITAL

When the STANDARD mode of the receiver is on, this

lights to indicate decoding of a Dolby Digital

multichannel signal.

24 2 PRO LOGIC II

When the (STANDARD) Pro Logic II mode of the

receiver is on, 2 PRO LOGIC II lights to indicate Pro

Logic II decoding.

25 VIR.SB

Lights during Virtual surround back processing.

26 DIRECT

Lights when source direct playback is in use. Direct

playback bypasses the tone controls for the most

accurate reproduction of a source.

Using the Virtual Surround Back mode

Selecting this mode allows you to hear a virtual

surround back channel through your surround

speakers. For example, you can choose to listen to

sources with no surround back channel information

(for example, 5.1 encoded material) with emulated 6.1

encoding (VSB ON). Sometimes the material may

sound better in the 5.1 format for which it was

originally encoded. In this case you can simply switch

it off (VSB OFF).

• Press VSB MODE (front panel) to select a virtual

surround back channel option.

Each press cycles through the options as follows:

• VSB ON — Virtual Surround Back is always used

Options

(for example, on 5.1 encoded material)

• VSB OFF — Virtual Surround Back mode is

0 to 7

Default: 3

switched off

Note

• You can't use the Virtual Surround Back mode with

headphones or with the STEREO / DIRECT mode.

–3 to +3

Default: 0

Listening in stereo

When you select STEREO or DIRECT, you will hear the

source through just the front left and right speakers

(and subwoofer). Dolby Digital and DTS multichannel

OFF

sources are downmixed to stereo.

• While listening to a source, press STEREO for

stereo playback.

10 to 90

Press repeatedly to switch between:

• STEREO — The audio is heard with your surround

settings and you can still use the Midnight,

Loudness, and tone functions.

27 AUTO SURR.

Lights when the Auto Surround feature is switched

on.

28 ATT

Lights when ANALOG ATT is used to attenuate

(reduce) the level of the analog input signal.

29 SLEEP

Lights when the receiver is in sleep mode.

30 Tuner indicators

/ MONO

Lights when the mono mode is set using the MPX

button.

/ STEREO

Lights when a stereo FM broadcast is being received

in auto stereo mode.

/ TUNED

Lights when a broadcast is being received.

31 Speaker indicator

Shows if the speaker system is on or not. SP A

means the speakers are switched on. SP means

the headphones are connected.

32 ADV.SURR. (Advanced Surround)

Lights when one of the Advanced Surround modes

has been selected.

33 WMA9 Pro

Lights to indicate decoding of a WMA9 Pro signal.

34 MIDNIGHT

Lights during Midnight listening.

35 D.E.

Lights when Dialog Enhancement (DIALOG E) is

switched on.

36 LOUDNESS

Lights during Loudness listening.

Manufactured under license from Dolby Laboratories.

"Dolby", "Pro Logic", and the double-D symbol are

trademarks of Dolby Laboratories.

"DTS" and "DTS 96/24" are trademarks of Digital Theater

Systems, Inc.

• DIRECT — Bypass all effects and surround

settings so that the audio remains as close to the

source audio signal as possible.

• AUTO SURR. — See Auto playback above.

Note

• DIRECT switches to STEREO when using Midnight,

Loudness, Dialog Enhancement, or the tone controls.

Using the Sound Retriever

When audio data is removed during the

compression process, sound quality often suffers

from an uneven sound image. The Sound Retriever

feature employs new DSP technology that helps

bring CD quality sound back to compressed 2-

channel audio by restoring sound pressure and

smoothing jagged artifacts left over after

compression.

• While listening to a source, press S. RETRIEVER.

Press repeatedly to switch between:

• RTRV1 ON — This option is engineered

especially for portable digital audio players.

• RTRV2 ON — This option is engineered

especially for portable digital radio devices (only

applicable when using the FRONT AUDIO INPUT).

• OFF — Switches the Sound Retriever off.

Specifications

Amplifier section

• Continuous power output

Front

100 W per channel* (200 Hz to 20 kHz, 0.7 %**, 8 Ω)

100 W*(200 Hz to 20 kHz, 0.7 %**, 8 Ω)

Center

Surround

100 W per channel*(200 Hz to 20 kHz, 0.7 %**, 8 Ω)

100 W*(45 Hz to 200 kHz, 0.7 %**, 8 Ω)

Subwoofer

• RMS Power Output

144 W per channel (1 kHz, THD, 10 %, 8 Ω)

Front

144 W (1 kHz, THD, 10 %, 8 Ω)

Center

144 W per channel (1 kHz, THD, 10 %, 8 Ω)

Surround

144 W (1 kHz, THD, 10 %, 8 Ω)

Subwoofer

* Measured pursuant to the Federal Trade Commission's Trade

Regulation rule on Power Output Claims for Amplifiers.

** Measured by Audio Spectrum Analyzer.

FM Tuner Section

Frequency Range

87.5 MHz to 108 MHz

75 Ω unbalanced

Antenna Input (DIN)

AM Tuner Section

Frequency Range

530 kHz to 1 700 kHz

Antenna

Loop antenna

Miscellaneous

Power requirements

AC 120 V / 60 Hz

Power consumption

320 W / 420 VA

In standby

0.5 W

Dimensions

16 9/16 in. (W) x 6 1/4 in. (H) x 13 11/16 in.(D)

420 mm (W) x 158 mm(H) x 348 mm(D)

Weight (without package)

19.0 lb (8.6 kg)

Furnished Parts

AM loop antenna

FM wire antenna

AA size IEC R6 dry cell batteries (to confirm

system operation)

Remote control

Mini-plug audio cable

These operating instructions

Note

Specifications and the design are subject to possible

modifications without notice, due to improvements.

Published by Pioneer Corporation

www.pioneerelectronics.com

(US)

www.pioneerelectronics.ca

(Canada)

<XRE3113-A>

Summary of Contents for Pioneer SX-316-S

Page 1 16 9/16 in. (W) x 6 1/4 in. (H) x 13 11/16 in.(D) Channel level the trouble isn't sorted out even after going through the checks below, ask your nearest Pioneer authorized independent service company to 420 mm (W) x 158 mm(H) x 348 mm(D) Dual Mono Setup carry out repair work.
Page 2 Les tonalités d’essai seront lancées lorsque vous aurez Remarque vente Pioneer agréé le plus proche de chez vous ou à votre revendeur pour effectuer les réparations. 3 Lorsque vous avez terminé, appuyez sur la appuyé sur ENTER. Lorsque le volume aura atteint le Les spécifications et la conception sont soumises à...

Pioneer SX-316-S Operating Instructions

Available languages

Quick Links

Related Manuals for Pioneer SX-316-S

Summary of Contents for Pioneer SX-316-S