Epson PowerLite Home Cinema 1080 Installer's Manual
Epson powerlite home cinema 1080: installation guide
Hide thumbs
Also See for PowerLite Home Cinema 1080:
- Quick start manual ,
- User manual (76 pages) ,
- Brochure & specs (4 pages)
Related Manuals for Epson PowerLite Home Cinema 1080
Summary of Contents for Epson PowerLite Home Cinema 1080
- Page 1 Installer Guide ® Follow these instructions to set up the PowerLite Pro Cinema 1080 ® projector and HQV video processor. For more information, see the manuals that came with these products.
- Page 2 4. Plug in the power cord for the video processor. Make sure batteries are installed in the HQV remote control. 5. Set up the projector and turn it on as outlined below. For details, see the projector User’s Guide. ■...
- Page 3 Note: If the projector is ceiling-mounted or set up for rear-screen projection, you’ll use the projector’s menu system to reorient the image (see step 1 on page 4). For best image quality, avoid tilting the projector or angling it toward the screen.
- Page 4 Selecting Projector Settings 1. If the projector is ceiling-mounted or set up for rear-screen projection, you need to reorient the image. Press the menu. Select Settings Press the button when done to exit the menu system. Menu 2. Press the Aspect 3.
- Page 5 Use the HQV calibration software to perform final color calibrations. See the ISF Certified Calibration Controls Dealer Guide for details. Once the ISF calibrations are complete, you can use the projector’s menu system, if necessary, to further fine-tune the color settings. Installing the Calibration Software and USB Drivers Note: These instructions explain how to connect to the HQV processor using a USB cable.
- Page 6 4. Windows XP: At the next page, select . Then select Next checkbox for Search removable media Windows 2000: Select select CD-ROM drives 5. Click to install the driver, then click Next 6. You see the Found New Hardware screen again. Repeat steps 3 through 5 to install a second driver.
- Page 7 Photo Research PR-650 SpectraColorimeter or Konica Minolta CS-200 Chroma Meter. ■ RGB Press the button on the Epson remote control and access this screen by selecting Menu Image > Advanced > RGB Adjust the offset and gain for each signal color. Use adjust the peak.
- Page 8 If you want to program a universal remote control to work with the projector, you can obtain a list of projector IR control codes from the Epson web site at epson.com/support. If you want the HQV video processor to be able to turn the projector on and off or control other functions, connect the supplied null-modem RS-232 cable as shown below.
- Page 9 You can download the complete ESC/VP21 Communication Manual for Epson home theater projectors from the Epson web site at epson.com/support. Following are some of the available codes: Item Power ON/OFF A/V Mute ON/OFF A/V Mute selection Source Terminal change Component...
- Page 10 Item Aspect ratio Auto Normal Full Zoom Wide Command ASPECT 00 ASPECT 20 ASPECT 21 ASPECT 22 ASPECT 25...
- Page 12 Trademarks Epson is a registered trademark and Exceed Your Vision is a trademark of Seiko Epson Corporation. PowerLite is a registered trademark of Epson America, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners.