Page 1
PSB.2006.04.002 PSB #: Reference: TI 05-95e Rev. A PowerLite 735c / 737c / 745c / 755c / 765c / 835p / 7850p Product(s): Animation converter issue found with EMP SlideMaker2 version 1.12 Subject: This bulletin was created to inform users of the EMP SlideMaker2 version 1.12 software of a problem converting certain animations from Microsoft PowerPoint into a Scenario file.
Page 2
(Ad hoc mode) is made to the projector. 2) The tested Wireless LAN cards are inserted into the PC and a wireless LAN connection is made to the projector using an access point (Infrastructure mode). Items evaluated: The following items were tested and confirmed to work in both Ad hoc and Infrastructure modes.
Page 3
ADTEK ADLINK2422C FMV Notebook (Intel Calexico) Wired LAN cards configuration: Inserted the wired LAN card to be tested into the projector, connected the projector to a hub and connected two PCs to the same hub. Items evaluated: The following items were tested and confirmed to work.
Page 4
SMC SMC8041TX 3Com 10/100 LAN PC Card 3CCFE574BT PCET100-CL Linksys 10/100 PC Card SMC 8041TX V.2, EZ PC Card 10/100, SMC BUFFALO LPC-PCM-CLX ELECOM LD-CDK/TX Corega EtherII PCC-TD PLANEX FNW-3700-TX The following cards are NOT compatible: 01) 3Com 3CCFE575BT-JP 02) 3Com 3CXFE575CT-JP 03) 3Com 3CXFEM656C 04) Megahertz 10/100 LAN CardBus PC Card, 3Com 05) Come once (Taiwan card)
Page 5
Subject: Evaluation results of Epson Projector PC applications tested in Windows XP with SP2. The purpose of this bulletin is to provide information on Epson PC projector applications tested under the Windows XP SP2 (Service Pack2) environment. Description: Information is provided about the evaluation results and recommendations for Epson PC projector applications functionality in Windows XP SP2 Firewall environment.
Page 6
Executing the Software: When executing the software noted below for the first time after SP2 installation completes, the following security alert messages are displayed: [EMP NS Connection] Security alert screen (EMP NS Connection) [EMP Network Manager] Security alert screen (EMP Network Manager) Page 2 of 14 PSB.2004.10.002...
Page 7
[EMP Monitor] Security alert screen (EMP Monitor) [EMP Multi Screen Adjustment] Security alert screen (EMP Multi Screen Adjustment) The Security Alert screen for EMP Multi Screen Adjustment is shown after clicking the Auto button of Network or clicking the Add button after entering an IP address in the IP Address box.
Page 8
[Cinema Color Editor] Security alert screen (Cinema Color Editor) The functions of the three buttons displayed in the security alert screen are explained below. [Keep Blocking] --- Enables you to register a started application in the “Exceptions” program of the Windows Firewall. The network port that the application uses is blocked.
Page 9
Operating Status Report When selecting the Keep Blocking button, the security alert message is closed and the main screen of each application is displayed. [EMP NS Connection Application] Port 3620 is necessary for searching for projectors. If this port is blocked, projectors are not detected.
Page 10
[Caution] In case the check box for Don’t allow exceptions is checked (this box is not checked at the initial setting), a network port for software is not unblocked even though the software is checked on Exceptions. Make sure this option is not selected.
Page 11
c.) Select the Exceptions tab and display exceptions program. [Caution] If this check box is not checked, the security alert screen is not displayed when starting software. d.) Check the check boxes for the software you don’t want to block. •Exceptions screen Page 7 of 14 PSB.2004.10.002...
Page 15
[EMP Multi Screen Adjustment Application]→ Check EPSON Projector Software for Multi Screen box Unblock screen (EMP Multi Screen Adjustment) Page 11 of 14 PSB.2004.10.002...
Page 16
[Cinema Color Editor Application] ---> Check Cinema Color Editor. Unblock screen (Cinema Color Editor) By following the above procedure, the network port that each application uses is unblocked and they can operate normally. Page 12 of 14 PSB.2004.10.002...
Page 17
EMP Monitor before installing SP2, the registered projectors may not be detected after SP2 installation. Program name EasyMP Software EPSON Projector EasyMP.net Software EPSON Projector Software for Multi Screen Cinema Color Editor Page 13 of 14 PSB.2004.10.002...
Page 18
VCOM Driver The following message is shown after the VCOM driver is installed on your PC. Select “No, not this time” item and continue the Plug&Play of the device. Notes: When you add the program to Exceptions list, the program can receive network communication from outside.
Page 19
EMP NS Connection application. These remote control applications use a "Video Hook Driver" that conflicts with the Epson GDI Monitor driver that is installed and used by EMP NS Connection. Most remote control programs load a small client application at Windows startup and leave an icon in the system tray (located at the bottom right on the desktop) to indicate they have been loaded.
Page 20
EasyMP Network Screen settings window. Description of issue: A user is configuring the EasyMP Network Screen settings on a PowerLite 735c or 7850p projector with the remote control in either "Easy Connect Mode" (Ad-Hoc) or "Access Point Mode"...
Page 21
Changing the Projector Name from the Projector EasyMP Menu Make sure the projector has a unique name so you can identify it when connecting to it from your computer. Follow the steps below to rename the projector: 1. Highlight the Clear button next to the Projector name, and then press Enter on the remote control to clear the text box.
Page 22
EMP Monitor software has added support for the PowerLite Cinema 500 projector. All other support for previously supported projectors remains the same. This software update can be downloaded from the Epson website. Locate and download epson11017.exe. This file is a self extracting archive that will automatically start the program installer once the file is extracted to your computer hard drive.
Page 23
Subject: Reason: This bulletin is to inform you of the testing results for wired and wireless LAN cards used with the PowerLite 735c / 7850p / 8300i with EasyMP.net option installed. Models and firmware versions used in the evaluation Model...
Page 24
ADTEK ADLINK2422C FMV Notebook (Intel Calexico) Wired LAN cards configuration: Insert the wired LAN card to be tested into the projector and make a network connection to the Items evaluated: The following items were tested and confirmed to work. 1. All functions of EMP Monitor.
Page 25
11. SMC 8036TX, EZ PC Card 10/100, SMC 12. TDK LAK-CB100X 13. Toshiba LANCB100A 14. Xircom CE3B-100BTX 15. Xircom CreditCard Ethernet CE3-10/10 NOTE: No EMI (electro magnetic interference) was done, only a functionality evaluation. PowerLite 735c PowerLite 7850p pass pass pass pass...
Page 26
The “Standby Mode” setting information was not included in the User Manual that is bundled with the projector, and is also not included in the User Manual posted on the Epson Website. However, when accessing the menu system on the projector using the remote control, the Advanced Menu does include the “Standby Mode”...
Page 27
Leave the fields blank and click OK. Page 2 of 4...
Page 28
This is the screen that appears after logging in to the projector’s Home Page. Page 3 of 4...
Page 29
Below, note the section called Standby Mode. To the right of Standby Mode is the Network ON/OFF settings. Page 4 of 4...
Page 30
Subject: wireless PC Cards This bulletin was created to inform you of issues that have been reported when accessing Epson Wireless Projectors using dual mode 802.11b/g or 802.11b/a wireless PC Cards, either in ad-hoc mode or through dual mode Access Points.