hit counter script
Asus PRIME H310M-F R2.0 Manual
  1. Manuals
  2. Brands
  3. Asus Manuals
  4. Motherboard
  5. PRIME H310M-F R2.0
  6. Manual

Asus PRIME H310M-F R2.0 Manual

Hide thumbs Also See for PRIME H310M-F R2.0:
Table of Contents

Advertisement

Quick Links

Download this manual
PRIME
H310M-F R2.0
E15121_PRIME_H310M-F_R2.0_UM.indb 1
1/4/2019 1:59:35 PM

Advertisement

Table of Contents
loading

Related Manuals for Asus PRIME H310M-F R2.0

Summary of Contents for Asus PRIME H310M-F R2.0

  • Page 1 PRIME H310M-F R2.0 E15121_PRIME_H310M-F_R2.0_UM.indb 1 1/4/2019 1:59:35 PM...
  • Page 2 Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.

  • Page 3: Table Of Contents

    Contents Safety information ..................iv About this guide ..................iv Package contents ..................vi PRIME H310M-F R2.0 specifications summary ........vi Chapter 1: Product introduction Motherboard overview ................1-1 Central Processing Unit (CPU) ..............1-6 System memory ..................1-7 Chapter 2: BIOS information BIOS setup program .................

  • Page 4: Safety Information

    Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
  • Page 5 Refer to the following sources for additional information and for product and software updates. ASUS websites The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information. Optional documentation Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer.

  • Page 6: Package Contents

    ** DDR4 2666MHz and higher memory modules will run at max. 2666MHz on Intel 8th Gen. ® 6-core or higher processors. *** Refer to www.asus.com for the Memory QVL (Qualified Vendors List). 1 x PCI Express 3.0 / 2.0 x16 slot (at x16 mode) Expansion slots 1 x PCI Express 2.0 x1 slot...
  • Page 7 ASUS 5X PROTECTION III - ASUS SafeSlot Core - Fortified PCIe Slot prevents damage - ASUS LANGuard - Protects against LAN surges, lightning strikes and static - electricity discharges - ASUS Overvoltage Protection - World-class circuit-protecting power design - ASUS Stainless-Steel Back I/O - 3x corrosion-resistance for greater durability...
  • Page 8 1 x Clear CMOS jumper (2-pin) 64 Mb Flash ROM, UEFI AMI BIOS, PnP, SM BIOS 3.1, ACPI 6.1, Multi- languageBIOS, ASUS EZ Flash 3, CrashFree BIOS 3, F6 Qfan Control, F3 BIOS features MyFavorites, Last Modified log, F12 PrintScreen, and ASUS DRAM SPD...

  • Page 9: Motherboard Overview

    Place this side towards LGA1151 U31G1_34 the rear of the chassis USB910 Realtek 8111H LAN_USB56 CHA_FAN AUDIO PCIEX16 Super Intel ® H310 64Mb BIOS SPEAKER PCIEX1 SATA6G_1 SATA6G_2 USB78 F_PANEL Scan the QR code to get the detailed pin definitions. ASUS PRIME H310M-F R2.0 E15121_PRIME_H310M-F_R2.0_UM.indb 1 1/4/2019 1:59:36 PM...
  • Page 10 ATX power connectors (24-pin EATXPWR, 4-pin ATX12V) Correctly orient the ATX power supply plugs into these connectors and push down firmly until the connectors completely fit. • For a fully configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12V Specification 2.0 (or later version) and provides a minimum power of 350 W. Ensure this PSU type has 24-pin and 4-pin power plugs. • We recommend that you use a PSU with higher power output when configuring a system with more power-consuming devices or when you intend to install additional devices. The system may become unstable or may not boot up if the power is inadequate. • DO NOT forget to connect the 4-pin ATX +12V power plug. Otherwise,the system will not boot up. CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector. Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors! The CPU_FAN connector supports a CPU fan of maximum 0.5A (6 W) fan power. Intel LGA1151 CPU socket ®...
  • Page 11 To erase the RTC RAM: Turn OFF the computer and unplug the power cord. PIN 1 Use a metal object such as a screwdriver to short the two pins. Plug the power cord and turn ON the computer. Hold down the <Del> key during the boot process and enter BIOS setup to re-enter data. If the steps above do not help, remove the onboard battery and short the two pins again to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the battery. PCI Express 2.0 x1 slot This motherboard has a PCI Express 2.0 x1 slot that supports PCI Express x1 network cards, SCSI cards, and other cards that comply with the PCI Express specifications. PCI Express 3.0 / 2.0 x16 slot This motherboard supports a PCI Express 3.0/2.0 x16 graphic card that complies with the PCI Express specifications. ASUS PRIME H310M-F R2.0 E15121_PRIME_H310M-F_R2.0_UM.indb 3 1/4/2019 1:59:36 PM...
  • Page 12 Rear panel connectors PS/2 Mouse port (Green). This port connects to a PS/2 mouse. Video Graphics Adapter (VGA) port. This 15-pin port is for a VGA monitor or other VGA-compatible devices. USB 3.1 Gen 1 (up to 5Gb/s) ports. These two 9-pin Universal Serial Bus (USB) ports are for USB 3.1 Gen 1 devices. • USB 3.1 Gen 1 devices can only be used for data storage. • We strongly recommend that you connect USB 3.1 Gen 1 devices to USB 3.1 Gen 1 ports for faster and better performance from your USB 3.1 Gen 1 devices. • Due to the design of the Intel 300 series chipset, all USB devices connected to the ® USB 2.0 and USB 3.1 Gen 1 ports are controlled by the xHCI controller. Some legacy USB devices must update their firmware for better compatibility. LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN) through a network hub. LAN port LED indications Speed Activity Link Activity/Link LED...
  • Page 13 Line In Rear Speaker Out panel) Front Speaker Front Speaker Lime (Rear panel) Line Out Front Speaker Out Pink (Rear panel) Mic In Mic In Bass/Center Bass/Center Side Speaker Lime (Front panel) To configure a 7.1-channel audio output: Use a chassis with HD audio module in the front panel to support a 7.1-channel audio output. USB 2.0 ports. These two 4-pin Universal Serial Bus (USB) ports are for USB 2.0 / 1.1 devices. PS/2 Keyboard port (Purple). This port connects to a PS/2 keyboard. ASUS PRIME H310M-F R2.0 E15121_PRIME_H310M-F_R2.0_UM.indb 5 1/4/2019 1:59:36 PM...

  • Page 14: Central Processing Unit (Cpu)

    ® Core™, Pentium ® Gold, and Celeron processors. ® Unplug all power cables before installing the CPU. • Ensure that you install the correct CPU designed for the LGA1151 socket only. DO NOT install a CPU designed for LGA1150, LGA1155 and LGA1156 sockets on the LGA1151 socket. • Upon purchase of the motherboard, ensure that the PnP cap is on the socket and the socket contacts are not bent. Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components. • Keep the cap after installing the motherboard. ASUS will process Return Merchandise Authorization (RMA) requests only if the motherboard comes with the cap on the LGA1151 socket. • The product warranty does not cover damage to the socket contacts resulting from incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP cap. Installing the CPU Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary. Chapter 1: Product introduction E15121_PRIME_H310M-F_R2.0_UM.indb 6 1/4/2019 1:59:37 PM...

  • Page 15: System Memory

    Channel B DIMM_B1* • You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation. • Always install DIMMs with the same CAS latency. For optimal compatibility, we recommend that you install memory modules of the same version or date code (D/C) from the same vendor. Check with the retailer to get the correct memory modules. • DDR4 2666MHz and higher memory modules will run at max. 2666MHz on Intel 8th ® Generation 6-core or higher processors. • Memory modules with memory frequency higher than 2133 MHz and its corresponding timing or the loaded X.M.P. Profile is not the JEDEC memory standard. The stability and compatibility of these memory modules depend on the CPU’s capabilities and other installed devices. • The default memory operation frequency is dependent on its Serial Presence Detect (SPD), which is the standard way of accessing information from a memory module. Under the default state, some memory modules for overclocking may operate at a lower frequency than the vendor-marked value. • Refer to www.asus.com for the latest Memory QVL (Qualified Vendors List). Recommended memory configuration ASUS PRIME H310M-F R2.0 E15121_PRIME_H310M-F_R2.0_UM.indb 7 1/4/2019 1:59:37 PM...
  • Page 16 Installing a DIMM To remove a DIMM Chapter 1: Product introduction E15121_PRIME_H310M-F_R2.0_UM.indb 8 1/4/2019 1:59:37 PM...

  • Page 17: Chapter 2: Bios Information

    To enter BIOS Setup after POST: Press <Ctrl>+<Alt>+<Del> simultaneously. Press the reset button on the system chassis. Press the power button to turn the system off then back on. Do this option only if you failed to enter BIOS Setup using the first two options. Using the power button, reset button, or the <Ctrl>+<Alt>+<Del> keys to force reset from a running operating system can cause damage to your data or system. We recommend you always shut down the system properly from the operating system. • The BIOS setup screens shown in this section are for reference purposes only, and may not exactly match what you see on your screen. • Visit the ASUS website at www.asus.com to download the latest BIOS file for this motherboard. • If the system becomes unstable after changing any BIOS setting, load the default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit menu or press hotkey F5. • If the system fails to boot after changing any BIOS setting, try to clear the CMOS and reset the motherboard to the default value. See section Motherboard overview for information on how to erase the RTC RAM. BIOS menu screen The BIOS setup program can be used under two modes: EZ Mode and Advanced Mode. Press <F7> to change between the two modes. ASUS PRIME H310M-F R2.0 E15121_PRIME_H310M-F_R2.0_UM.indb 1 1/4/2019 1:59:37 PM...

  • Page 18: Ez Mode

    EZ Mode By default, the EZ Mode screen appears when you enter the BIOS setup program. The EZ Mode provides you an overview of the basic system information, and allows you to select the display language, system performance mode, fan profile and boot device priority. To access the Advanced Mode, click Advanced Mode(F7) or press <F7>. The default screen for entering the BIOS setup program can be changed. Go to the Setup Mode item under the Boot menu. Displays the CPU/motherboard temperature, CPU voltage output, Displays the system CPU/chassis fan speed, and SATA properties of the information selected mode. Click Selects the display <Enter> to switch EZ language of the BIOS System Tuning modes setup program Goes to...

  • Page 19: Advanced Mode

    Menu bar MyFavorite Language Hot Keys Pop-up window Returns to Sub-menu items EZ Mode Scroll bar Search on FAQs General help Menu items Configuration Last modified settings fields Displays hardware monitoring data ASUS PRIME H310M-F R2.0 E15121_PRIME_H310M-F_R2.0_UM.indb 3 1/4/2019 1:59:38 PM...

  • Page 20: Exit Menu

    Search on FAQ Move your mouse over this button to show a QR code. Scan this QR code with your mobile device to connect to the ASUS BIOS FAQ web page. You can also scan the QR code below. Exit menu The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. Load Optimized Defaults This option allows you to load the default values for each of the parameters on the Setup menus. When you select this option or if you press <F5>, a confirmation window appears. Select OK to load the default values. Save Changes & Reset Once you are finished making your selections, choose this option from the Exit menu to ensure the values you selected are saved. When you select this option or if you press <F10>, a confirmation window appears. Select OK to save changes and exit. Discard Changes & Exit This option allows you to exit the Setup program without saving your changes. When you select this option or if you press <Esc>, a confirmation window appears. Select OK to discard changes and exit. Launch EFI Shell from USB drives This option allows you to attempt to launch the EFI Shell application (shellx64.efi) from one of the available USB devices. Chapter 2: BIOS information E15121_PRIME_H310M-F_R2.0_UM.indb 4...

  • Page 21: Appendix

    Appendix Notices FCC Compliance Information Responsible Party: Asus Computer International Address: 48720 Kato Rd., Fremont, CA 94538, USA Phone / Fax No: (510)739-3777 / (510)608-4555 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 22 Compliance Statement of Innovation, Science and Economic Development Canada (ISED) This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
  • Page 23 ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials.
  • Page 24 доступний на: www.asus.com/support Cijeli tekst EU izjave o sukladnosti dostupan je na: www.asus.com/support Türkçe AsusTek Computer Inc., bu aygıtın temel gereksinimlerle ve ilişkili Čeština Společnost ASUSTeK Computer Inc. tímto prohlašuje, že toto Yönergelerin diğer ilgili koşullarıyla uyumlu olduğunu beyan eder.

  • Page 25: Asus Contact Information

    +1-510-739-3777 +1-510-608-4555 Web site http://www.asus.com/us/ Technical Support Support fax +1-812-284-0883 Telephone +1-812-282-2787 Online support http://qr.asus.com/techserv ASUS COMPUTER GmbH (Germany and Austria) Address Harkort Str. 21-23, 40880 Ratingen, Germany +49-2102-959931 Web site http://www.asus.com/de Online contact http://eu-rma.asus.com/sales Technical Support Telephone +49-2102-5789555 Support Fax...

Table of Contents