Related Manuals for Sharp KL-610TBLM-UK
Summary of Contents for Sharp KL-610TBLM-UK
- Page 1 Home Appl ances Cook ng User Manual Hood KL-610TBLM-UK KL-610TBLM-CH KL-610TBLM-EU KL-910TBMH-UK KL-910TBMH-CH KL-910TBMH-EU For L fe...
-
Page 2: Table Of Contents
Table Of Contents Pre-Installation Safety Rules 4 2 Technical Specifications 6 3 General Appearance 7 4 Assembling of Appliance 8 5 Assembly of Air Discharge Outlet 9... - Page 3 Dear Customer, Thank you for choosing a Sharp Home Appliance. We hope you enjoy using your new product, and recommend that you carefully read these instructions and take note of our recommendations for care and maintenance. This will help to ensure trouble free operation for many years to come.
-
Page 4: Pre-Installation Safety Rules
1 Pre-Installation Safety Rules • Follow the instructions in this manual. Sharp • Energy inlet cord shouldn't be subject to heating, cannot be held liable for accidents, damages or fire that might occur as a result of failure to follow the jamming or crushing during assembly. - Page 5 Safety Information to Be Considered During Cleaning and Maintenance • The cable of the appliance must be disconnected or the fuse must be turned off prior to all cleaning and maintenance processes. • Appliance shouldn't be cleaned with steam cleaning devices. • The fire risk gets higher due to oil deposits if cleaning and maintenance are not performed.
-
Page 6: Technical Specifications
2 Technical Specifications Consumer Services General Information KL-610TBLM-UK This Operating Manual has been prepared for Sharp KL-610TBLM-CH cooker hoods. KL-610TBLM-EU KL-910TBMH-UK This cooker hood is designed for use over a cooker. Make sure that your wall can stand the weight of your KL-910TBMH-CH cooker hood. -
Page 7: General Appearance
3 General Appearance Figure 1 Figure 2 Dimensions given in technical drawings are in mm. 1 Inner Flue 2 Outer Flue The purpose of this image is to inform you about 3 Control Panel the parts of your appliance. The parts may vary 4 Cooker Lighting depending on the model of the appliance. -
Page 8: Assembling Of Appliance
4 Assembling of Appliance Figure 3 : Installation Diagram and Components 1 Inner Flue 2 Outer Flue 3 Cooker Hood Hanging Plates 4 Body 5 4 x 5.5 60 Hanging Screws 6 4x Ø10 mm Plastic Wall Plugs 7 2x 3.9 x22 Flue Connection Plate Screws 8 Flue Connection Plate 9 2x Ø6 mm Plastic Wall Plug... -
Page 9: Assembly Of Air Discharge Outlet
5 Assembly of Air Discharge Outlet 1 Ø150/120 mm Flue Adapter (Option) 2 2x 3 5x9 5 Screw 3 Ø120/150 mm Plastic Flue 4 Body Attach the plastic flue to the product's body (Figure - Connect the flue adapter to the plastic flue when required. -
Page 10: Assembly Of Flues
6 Assembly of Flues Fit the air outlet pipe of the product to the plastic flue 1 or 2. Figure 5 The outer and inner sheet metal flues (Figure 5) are encased one within the other. For this; - The cooker hood is set in the midst, and then the flue connecting plate (8) is directly affixed to the wall, under the cover or points E and F are marked after performing a measurement. -
Page 11: Operation
7 Operation Decrease Increase Light Speed On/Off Speed On / Off Screen Timer Information: Switch on the cooker hood when you Boost Ventilation Mode: start the cooking process but switch it off a couple of minutes after the end of the cooking process. The The model you have purchased has a boost mode steam in the kitchen is eliminated most effectively by for energy efficiency. -
Page 12: Cleaning And Maintenance
8 Cleaning and Maintenance WARNING: Ensure that the appliance is E) Cleaning Operation unplugged or fuse is turned off before all cleaning Submerge the aluminium filter in hot water with dish and maintenance operations. detergent and wait for some time; then clean with a soft brush. -
Page 13: Troubleshooting
8 Troubleshooting Should you experience any problems with your appliance, please first check the troubleshooting guide below. If this does not solve the problem, please contact Sharp via the contact information in this manual or through the website. PROBLEM... -
Page 14: Service & Warranty
0333 577 7230 Lines are open Mon to Fri 09.00 to 20.00 & Sat and Sun 10.00 to 16.00 Vestel UK the licence partner for Sharp guarantees that for a period of 2 years from the date of purchase the enclosed product will be free from defects in materials and workmanship. - Page 15 V s t our webs te: www.sharphomeappl ances.com Or contact us: Serv ce & Support 52171160...