Related Manuals for Siemens RUGGEDCOM M969F
Summary of Contents for Siemens RUGGEDCOM M969F
- Page 1 Preface Introduction Installing the Device RUGGEDCOM M969F Device Management Communication Ports Technical Specifications Installation Guide Accessories Certification 07/2018 RC1349-EN-02...
- Page 2 Warranty Siemens warrants this product for a period of five (5) years from the date of purchase, conditional upon the return to factory for maintenance during the warranty term. This product contains no user-serviceable parts. Attempted service by unauthorized personnel shall render all warranties null and void.
- Page 3 RUGGEDCOM M969F Installation Guide Contacting Siemens Address Telephone E-mail Siemens Canada Ltd Toll-free: 1 888 264 0006 ruggedcom.info.i-ia@siemens.com Industry Sector Tel: +1 905 856 5288 300 Applewood Crescent Fax: +1 905 856 1995 Concord, Ontario https://www.siemens.com/ruggedcom Canada, L4K 5C7...
- Page 4 RUGGEDCOM M969F Installation Guide...
-
Page 5: Table Of Contents
RUGGEDCOM M969F Installation Guide Table of Contents Table of Contents Preface ......................Alerts ..............................vii Related Documents ..........................viii Accessing Documentation ........................viii Training ............................viii Customer Support ..........................viii Chapter 1 Introduction ..................... 1.1 Feature Highlights ........................1 1.2 Description ........................... 2 1.3 Required Tools and Materials ...................... - Page 6 RUGGEDCOM M969F Table of Contents Installation Guide Chapter 4 Communication Ports ..................4.1 Copper Ethernet Ports ......................... 20 4.2 Fiber Optic Ethernet Ports ......................21 Chapter 5 Technical Specifications .................. 5.1 Power Supply Specifications ......................23 5.2 Failsafe Alarm Relay Specifications ....................23 5.3 Copper Ethernet Port Specifications ....................
-
Page 7: Preface
Installation Guide Preface Preface This guide describes the RUGGEDCOM M969F. It describes the major features of the device, installation, commissioning and important technical specifications. It is intended for use by network technical support personnel who are responsible for the installation, commissioning and maintenance of the device. -
Page 8: Related Documents
Siemens Sales representative. Customer Support Customer support is available 24 hours, 7 days a week for all Siemens customers. For technical support or general information, contact Siemens Customer Support through any of the following methods: Online Visit http://www.siemens.com/automation/support-request... -
Page 9: Customer Support
RUGGEDCOM M969F Installation Guide Preface • Contact a local Siemens representative from Sales, Technical Support, Training, etc. • Ask questions or share knowledge with fellow Siemens customers and the support community Customer Support... - Page 10 RUGGEDCOM M969F Preface Installation Guide Customer Support...
-
Page 11: Introduction
IP65/IP67 rated for protection against strong jets of water (IP65) or temporary immersion in water (IP67). Designed to operate reliably in harsh environments, the RUGGEDCOM M969F provides a high level of tolerance to vibrations and shock impact; high level of immunity to electromagnetic interference; an operating temperature range of -40 to 85 °C (40 to 185 °F);... -
Page 12: Description
• Auto-negotiation on all 10/100Base-TX ports, 100FX on optic fiber ports • Auto-MDI/MDIX (crossover) on all 10/100Base-TX ports • LED indicators for link and activity Section 1.2 Description The RUGGEDCOM M969F features various ports, controls and indicator LEDs for connecting, configuring and troubleshooting the device. Description... - Page 13 Installation Guide Introduction Figure 1: RUGGEDCOM M969F (M12 Connectors Shown) 1. Copper Ethernet Ports 2. Port Status LED 3. POWER 1 LED 4. POWER 2 LED 5. ALARM LED 6. RS-232 Console Port 7. Failsafe Output Relay 8. M12 Power Supply Port 9. Fiber Optic Ethernet Ports 10. Surge Ground Connection 11. Chassis Ground Connection...
- Page 14 Introduction Installation Guide Figure 2: RUGGEDCOM M969F (RJ45 Connectors Shown) 1. Copper Ethernet Ports 2. Port Status LED 3. POWER 1 LED 4. POWER 2 LED 5. ALARM LED 6. RS-232 Console Port 7. Failsafe Output Relay 8. M23 Power Supply Port 9. Fiber Optic Ethernet Ports 10. Surge Ground Connection 11. Chassis Ground Connection Port Status LED Indicate the status of each port.
-
Page 15: Required Tools And Materials
Siemens recommends using RUGGEDCOM industrial Ethernet shielded cables for all Ethernet ports. Siemens does not recommend the use of copper cabling of any length for critical, real-time substation automation applications. All copper Ethernet ports on RUGGEDCOM products include transient suppression circuitry to protect against damage from electrical transients and conform with IEC 61850-3 and IEEE 1613 Class 1 standards. -
Page 16: Supported Fiber Optic Cables
RUGGEDCOM M969F Introduction Installation Guide Siemens also does not recommend using copper Ethernet ports to interface with devices in the field across distances that could produce high levels of ground potential rise (i.e. greater than 2500 V), during line-to-ground fault conditions. -
Page 17: Ingress Protection
These ratings are determined by specific tests. The RUGGEDCOM M969F Industrial Ethernet Switch is manufactured and tested to IP67 standards. With an IP67 rating a product will be "dust tight" and remain completely sealed when immersed in water to a depth of 1 meter for 1 hour (IEC 60529). - Page 18 Chapter 1 RUGGEDCOM M969F Introduction Installation Guide Decommissioning and Disposal...
-
Page 19: Installing The Device
This product contains no user-serviceable parts. Attempted service by unauthorized personnel shall render all warranties null and void. Changes or modifications not expressly approved by Siemens Canada Ltd could invalidate specifications, test results, and agency approvals, and void the user's authority to operate the equipment. -
Page 20: Unpacking The Device
If any item is missing or damaged, contact Siemens for assistance. Section 2.3 Mounting the Device The RUGGEDCOM M969F is designed to be mounted on a panel by affixing the top and bottom flanges of the device to a panel using screws. IMPORTANT! Heat generated by the device is channeled outwards from the enclosure. -
Page 21: Connecting The Failsafe Alarm Relay
Connecting the Failsafe Alarm Relay The Failsafe output relay is provided to signal critical error conditions that may occur on the RUGGEDCOM M969F series switches. The contacts are energized upon power up of the unit and remain energized until a critical error occurs. -
Page 22: Connecting Power
The M23 power connector has five terminal pins, which means two power supply sources are allowed to power the RUGGEDCOM M969F with the M23 power connector. The RUGGEDCOM M969F supports dual redundant power supplies: Power Supply 1 (PS1) and Power Supply 2 (PS2). -
Page 23: Power Supply Wiring
AC. Section 2.5.2 Power Supply Wiring The following illustrates how to connect the RUGGEDCOM M969F to a single or dual power supplies. NOTE • For 100-240 VAC rated equipment, a 250 VAC appropriately rated circuit breaker must be installed. - Page 24 Chapter 2 RUGGEDCOM M969F Installing the Device Installation Guide Single Low DC Power Supply Wiring Figure 8: DC Power Supply Wiring Example (M23 Connector) 1. M23 Power Connector 2. Ground Bus 3. 300 VDC Breaker 4. DC Power Source Dual AC/DC Power Supply Wiring Figure 9: AC and AC Power Supply Wiring Example 1. M23 Power Connector ...
-
Page 25: Disabling Line-To-Ground Transient Protection
RUGGEDCOM M969F Chapter 2 Installation Guide Installing the Device Figure 10: AC and DC Power Supply Wiring Example 1. M23 Power Connector 2. Ground Bus 3. Line 4. 250 VAC Breaker 5. 110/230 VAC Power Source (PS2) 6. Neutral 7. Safety 8. 300 VDC Breaker 9. DC Power Source (PS1) Figure 11: DC and DC Power Supply Wiring Example 1. M23 Power Connector ... - Page 26 Chapter 2 RUGGEDCOM M969F Installing the Device Installation Guide Figure 12: Surge Ground/Chassis Ground Connection Disabling Line-to-Ground Transient Protection...
-
Page 27: Device Management
Connecting to the Device The following describes the various methods for accessing the ROS console and Web interfaces on the device. For more detailed instructions, refer to the ROS User Guide for the RUGGEDCOM M969F. RS-232 Console Port Connect a PC or terminal directly to the RS-232 console port to access the boot-time control and ROS interfaces. -
Page 28: Configuring The Device
Communication Ports Connect any of the available Ethernet ports on the device to a management switch and access the ROS console and Web interfaces via the device's IP address. The factory default IP address for the RUGGEDCOM M969F is https://192.168.0.1. -
Page 29: Communication Ports
Communication Ports Communication Ports The RUGGEDCOM M969F can be equipped with various types of communication ports to enhance its abilities and performance. To determine which ports are equipped on the device, refer to the factory data file available through ROS. For more information on how to access the factory data file, refer to the ROS User Guide for the RUGGEDCOM M969F. -
Page 30: Copper Ethernet Ports
Section 4.1 Copper Ethernet Ports The RUGGEDCOM M969F supports eight 10/100Base-TX Ethernet ports that allow connection to standard Category 5 (CAT-5) unshielded twisted-pair (UTP) cables with RJ45 male connectors or M12 male connectors. The RJ45/M12 connectors are directly connected to chassis ground on the device and can accept CAT-5 shielded twisted-pair (STP) cables. -
Page 31: Fiber Optic Ethernet Ports
RUGGEDCOM M969F Chapter 4 Installation Guide Communication Ports M12 receptacles at either end. Ground loops can cause excessive noise and interference, but more importantly, create a potential shock hazard that can result in serious injury. Pin-Out (RJ45) The following is the pin-out description for the RJ45 connectors:... - Page 32 Chapter 4 RUGGEDCOM M969F Communication Ports Installation Guide Figure 18: LC Port 1. Tx Connector 2. Rx Connector For specifications on the available fiber optic Ethernet ports, refer to Section 5.4, “Fiber Optic Ethernet Port Specifications”. Fiber Optic Ethernet Ports...
-
Page 33: Technical Specifications
RUGGEDCOM M969F Chapter 5 Installation Guide Technical Specifications Technical Specifications This section details the specifications and operating conditions of the device. CONTENTS • Section 5.1, “Power Supply Specifications” • Section 5.2, “Failsafe Alarm Relay Specifications” • Section 5.3, “Copper Ethernet Port Specifications” •... -
Page 34: Copper Ethernet Port Specifications
100 m (328 ft) Connector Type RJ45 or M12 Section 5.4 Fiber Optic Ethernet Port Specifications The following details the specifications for fiber Ethernet ports that can be ordered with the RUGGEDCOM M969F. Fast Ethernet Optical Specifications Tx (dBm) Typical Power... -
Page 35: Operating Environment
Maximum Altitude Measured from a 30 cm (12 in) radius surrounding the center of the RUGGEDCOM M969F enclosure. Reduced to -40 to 80 °C (-40 to 76 °F) when equipped with a 100Base-FX, single-mode, 1300 nm, long-reach 90 km port(s). -
Page 36: Dimension Drawings
Chapter 5 RUGGEDCOM M969F Technical Specifications Installation Guide Section 5.7 Dimension Drawings NOTE All dimensions are in inches, unless otherwise stated. Figure 19: 8 RJ45 IP67 Ethernet Ports and M23 Power Dimension Drawings... - Page 37 RUGGEDCOM M969F Chapter 5 Installation Guide Technical Specifications Figure 20: 8 M12 D-Code Ethernet Ports and M23 Power Dimension Drawings...
- Page 38 Chapter 5 RUGGEDCOM M969F Technical Specifications Installation Guide Dimension Drawings...
-
Page 39: Accessories
RUGGEDCOM M969F Chapter 6 Installation Guide Accessories Accessories This chapter details the various accessories available for the RUGGEDCOM M969F. CONTENTS • Section 6.1, “Power (1/unit)” • Section 6.2, “Console (1/unit)” • Section 6.3, “Failsafe (1/unit)” • Section 6.4, “Ethernet (8/unit)” • Section 6.5, “LC Fiber Optic (2/unit)”... -
Page 40: Console (1/Unit)
Chapter 6 RUGGEDCOM M969F Accessories Installation Guide M23 Power Cable • Description Overmold R/A M23 plug to free end, 5m yellow PUR jacket, for dual power supply • Order Code 99-43-0129-001 • Cable Specifications Overmold R/A M23 plug to free end, 5 m Figure 22: M23 Power Cable... -
Page 41: Failsafe (1/Unit)
RUGGEDCOM M969F Chapter 6 Installation Guide Accessories M12 Console Port Mating Connector • Description M12-straight plug, 8 pole, A-coded, IP67 rated • Order Code 99-60-0002 Figure 24: M12 Console Port Mating Connector Section 6.3 Failsafe (1/unit) M12 FailSafe Port Mating Cable • Description M12 4pole A-coded;... -
Page 42: Ethernet (8/Unit)
Chapter 6 RUGGEDCOM M969F Accessories Installation Guide M12 FailSafe Port Mating Connector • Description M12-straight plug, 4 pole, A-coded, IP67 rated • Order Code 99-60-0009 Figure 26: M12 FailSafe Port Mating Connector Section 6.4 Ethernet (8/unit) M12 D-code Ethernet Port Mating Cable • Description M12 D-code to RJ45;... - Page 43 RUGGEDCOM M969F Chapter 6 Installation Guide Accessories M12 D-code Ethernet Port Mating Connector • Description M12-straight plug, 4 pole, D-coded, IP67 rated • Order Code 99-60-0008 Figure 28: M12 D-code Ethernet Port Mating Connector M12 D-Code Ethernet Port Mating Cable • Description M12 male D-code to male D-code;...
- Page 44 Chapter 6 RUGGEDCOM M969F Accessories Installation Guide IP67 Metal RJ45 Ethernet Port Mating Cable • Description IP67 Metal RJ45 plug to RJ45, CAT5e shielded patch cable, 3m • Order Code 99-43-0182-001 Figure 30: IP67 Metal RJ45 Ethernet Port Mating Cable IP67 Metal RJ45 Ethernet Port Mating Connector •...
-
Page 45: Lc Fiber Optic (2/Unit)
RUGGEDCOM M969F Chapter 6 Installation Guide Accessories IP67 Metal RJ45 Ethernet Port Mating Cable • Description IP67 Metal RJ45 plug on both ends; Category 5e shielded patch cable, 3m • Order Code 99-43-0039-001 Figure 32: IP67 Metal RJ45 Ethernet Port Mating Cable Section 6.5... - Page 46 Chapter 6 RUGGEDCOM M969F Accessories Installation Guide • Description Cable Singlemode Metal IP67 LC to LC, Singlemode fiber cable 3 meters, IP67 rated • Order Code 99-43-0055-001 Figure 34: LC Port Mating Connector LC Port Mating Connector • Description Cable Multimode Metal IP67 LC to Metal IP67 LC, Multimode fiber cable 3meters, IP67 rated •...
- Page 47 RUGGEDCOM M969F Chapter 6 Installation Guide Accessories LC, RJ45 Port Cap • Description RJ45 outlet cap IP67, Metal • Order Code 99-60-0011 Figure 37: LC, RJ45 Port Cap LC Fiber Optic (2/unit)
- Page 48 Chapter 6 RUGGEDCOM M969F Accessories Installation Guide LC Fiber Optic (2/unit)
-
Page 49: Certification
RUGGEDCOM M969F Chapter 7 Installation Guide Certification Certification The RUGGEDCOM M969F device has been thoroughly tested to guarantee its conformance with recognized standards and has received approval from recognized regulatory agencies. CONTENTS • Section 7.1, “Approvals” • Section 7.2, “MIL-STD Test Specifications”... -
Page 50: European Commission (Ec)
Information Technology Equipment – Radio Disturbance Characteristics – Limits and Methods of Measurement The device is marked with a CE marking and can be used throughout the European community. A copy of the CE Declaration of Conformity is available from Siemens Canada Ltd. For contact information, refer to “Contacting Siemens”. -
Page 51: Ised
Certification Section 7.1.5 ISED This device is declared by Siemens Canada Ltd to meet the requirements of the following ISED (Innovation Science and Economic Development Canada) standard: • CAN ICES-3 (A)/NMB-3 (A) This device further complies with IC RSS-210 and is approved under the ID 4997A-VG5RW80G. -
Page 52: Emc And Environmental Type Tests
MIL-STD 901D High Impact Shock Test MIL-STD-1275B Power Quality MIL-STD-1399 DC Magnetic Field Testing Section 070 Part 1 Section 7.3 EMC and Environmental Type Tests The RUGGEDCOM M969F has passed the following EMC and environmental tests. EMC and Environmental Type Tests... - Page 53 RUGGEDCOM M969F Chapter 7 Installation Guide Certification IEC 61850-3 Type Tests Severity Test Description Test Levels Levels IEC 61000-4-2 Enclosure Contact ± 8 kV Enclosure Air ± 15 kV IEC 61000-4-3 Radiated RFI Enclosure ports 20 V/m IEC 61000-4-4 Burst (Fast Transient) Signal ports ±...
- Page 54 Chapter 7 RUGGEDCOM M969F Certification Installation Guide IEEE 1613 Type Tests NOTE • If the unit contains copper ports, the IEEE 1613 conformance is Class 1 (during disturbance, errors may occur but recovery is automatic). • If the unit contains all fiber ports, the IEEE 1613 conformance is Class 2 (during disturbance, no errors will occur).
- Page 55 RUGGEDCOM M969F Chapter 7 Installation Guide Certification Test Description Test Levels Severity Levels IEC 60529 (IPx6) Ingress Protection Water Jet 100 l/m @ 2.5 — m as per 14.2.6 IEC 60529 (IPx7) Ingress Protection Water Submersion 30 min @ 1 m —...
- Page 56 Chapter 7 RUGGEDCOM M969F Certification Installation Guide EMC and Environmental Type Tests...