Table of Contents
Advertisement
CAUTION
• With free motion quilting, control the feeding
speed of the fabric to match the sewing speed.
If the fabric is moved faster than the sewing
speed, the needle may break or other damage
may result.
a
Slide the feed dog position switch, located at the rear
of the machine on the base, to
from the rear of the machine).
a
1 Feed dog position switch (as seen from the rear of the
machine)
→ The feed dogs are lowered.
Select
.
b
c
Remove the presser foot holder (see the "Basic
operations" section) and the screw.
d
Position the free motion echo quilting foot "E" on the
left side of the presser bar with the holes in the quilting
foot and presser bar aligned.
e
(to the left as seen
• Be sure to securely tighten the screws with the
f
Appliqué, Patchwork and Quilt Stitching
Tighten the screw with the included screwdriver.
CAUTION
included screwdriver. Otherwise, the needle
may touch the quilting foot, causing it to bend
or break.
Using the measurement on the quilting foot as a guide,
sew around the motif.
1 6.4 mm (approx. 1/4 inch)
S
Sewing S-33
Advertisement
Table of Contents
Troubleshooting
