Summary of Contents for Honeywell VERISHIELD VS 321H
- Page 1 VERISHIELD - VS 321H User instructions User instructions Mode d’emploi Instrucciones de uso ®...
- Page 2 VERISHIELD - VS 321H (A) BATTERY REPLACEMENT AND CHARGING BATTERY STATUS Battery level 100-10% 10-0% LED [C8] colour GREEN BATTERY CHARGING WITH USB CABLE LED [C4] Status RED (blinking) Charging in progress GREEN Charged, ready to use (B) WEARING INSTRUCTIONS...
- Page 3 (C) OPERATING THE HEADSET - HEADSET CONTROLS (D) TEST RESULTS AND TECHNICAL DATA TESTED ACCORDING TO ANSI S3.19-1974 Frequency, Hz *D1 125 250 500 1000 2000 3150 4000 6300 8000 x dB Mean Attenuation, dB *D2 Canada Standard Deviation, dB *D3 Class xx Headband Force: Small = XX N, Medium = XX N, Large = XX N *D5 TESTED ACCORDING TO AS/NZS 1270:2002...
-
Page 4: Product Description
Verishield - VS 321H PRODUCT NUMBER: The VeriShield VS 321H headset is an over-the-ear hearing protector with built-in personal sound exposure monitoring. The headset combines a high level of noise reduction with sound amplification to allow workers to be aware of their surroundings, hear warning signals and alerts while still being protected. -
Page 5: Important User Information
8 This product may be adversely affected by certain chemical substances. Further information should be sought from the manufacturer. 9 All Honeywell thermoplastic hearing protection products will remain in good condition with regard to shelf life while the product is stored in a warehouse under controlled conditions. -
Page 6: Pair With Bluetooth Device
User instructions DOSE MONITORING Silence Dose Alarm Press *C2 *C3 flashes red and stops. Alarm stops FIT TEST Double press Perform Fit test Repeated audio tone Fit test result: Good fit Positive audio tone Fit test result: Poor fit Negative audio tone CALIBRATION Calibration in progress *C3 Blinking Green... -
Page 7: Audio Input Levels
ATTENUATION DATA Verishield is tested and approved in accordance with ANSI S3.19-1974 Standard at Michael & Associates Inc., USA. Verishield Attenuation Data according to American National Standards Institute Specifications ANSI S3.19-1974 (in passive mode, electronics switched off) The level of noise entering a person’s ear, when hearing protection is worn as directed, is closely approximated by the difference between the A-weighted environmental level and the NRR. - Page 10 Product is compatible with any specific third party hardware or software other than as expressly specified by Honeywell and further does not represent or warrant that any type of warning signals including communication with other people in the surroundings can be heard and understood by the wearer of this hearing protector.
- Page 11 The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Honeywell Safety Products USA, Inc. is under license. Other trademarks and trade names are those of their respective owners.
- Page 12 MANUFACTURER Honeywell Safety Products USA, Inc. 7828 Waterville Road, San Diego, CA92154 (800)430-5490 www.honeywellsafety.com SUPPORT & CONTACT UNITED STATES 7828 Waterville Road San Diego, CA 92154 USA T 1 800 430 5490t Document number: 23426-4045-181009 © All rights reserved.