Sensor Recommendation - Bosch C 80 Manual

Data logger and sensor interface

Table of Contents

20 | GPS Sensor

20.3 Sensor recommendation

20.3.1 Configuration of the recommended Navilock

130 / 144

The system has been tested with the Navilock NL-8004P MD6 Serial PPS Multi GNSS Re-

ceiver. This sensor is based on a U-Blox 8 chipset and is fully configurable with the

Navilock "U-Center" software. To use this sensor with Bosch Motorsport components the

transfer rate, the satellite system and the update rate need to be reconfigured. More in-

formation about the configuration can be found in the Appendix.

NL-8004P MD6 Serial PPS Multi GNSS Receiver

For the sensor configuration, the sensor needs to be connected to the Navilock software

"U‑Center" which is available from Navilock free of charge. Navilock offers a USB connec-

tion cable for the sensor.

In "U-Center" click "View" – "Configuration View" to start the configuration. The follow-

ing 3 points have to be changed:

Transfer Rate

– Click on "PRT (Ports)".

– Change the baud rate to a fixed value, this value needs to meet the setting of Race-

Con. For a good signal quality we recommend 115,200 baud.

– Click on "Send" to store the new setting in "U-Center".

– Click on "CFG (Configuration)".

– Click on "Send" to save the new setting on the sensor.

Manual_C_80

Bosch Motorsport

Table of Contents