Advertisement
Quick Links
Use
CA1Q4895en
2016-03-24
Electrical Actuators
for valves VVP459.., VXP459.., VMP459..,
VXG48.., VXI48.., VVG549..
SSC319
operating voltage AC 230 V
SSC819
operating voltage AC 24 V
SSC619
operating voltage AC/DC 24 V
Nominal force 300 N
Automatic identification of valve stroke
Direct mounting with coupling nut, no tools required
Cable connection via screw terminals
Manual override with indication of position and direction of travel
Parallel connection of multiple actuators
For operation of Siemens 2-port and 3-port valves with a nominal stroke of 5.5 mm for
water-side control of hot water and cooling water in heating, ventilation and air
conditioning systems
OEM
SSC319
SSC819
SSC619
3-position control signal
3-position control signal
DC 0...10 V control signal
Building Technologies
Advertisement
Related Manuals for Siemens acvatix SSC319
Summary of Contents for Siemens acvatix SSC319
- Page 1 Manual override with indication of position and direction of travel Parallel connection of multiple actuators For operation of Siemens 2-port and 3-port valves with a nominal stroke of 5.5 mm for water-side control of hot water and cooling water in heating, ventilation and air...
- Page 2 2. Remove cover 3. Connect the 2 contacts behind the slot for about 1 second. The calibration can only be made correctly if the actuator is fitted to a valve (refer to «Equipment combinations»). Siemens Electrical Actuators CA1Q4895en Building Technologies 2016-03-24...
- Page 3 Note To retain the manually set position, unplug the connecting cable or switch off the rated voltage and the control signal. Siemens Electrical Actuators CA1Q4895en Building Technologies 2016-03-24...
- Page 4 Warranty The technical relating to specific applications are valid only in conjunction with the Siemens valves listed in this Data Sheet under «Equipment combinations». The use of the SSC.. actuators in conjunction with third-party valves invalidates any warranty offered by Siemens Building Technologies / HVAC Products.
- Page 5 EN 60721-3-3 EN 60721-3-2 EN 60721-3-1 ambient conditions Environmental conditions class 3K3 class 2K3 class 1K3 Temperature +5...+50 °C –25...+70 °C –25...+70 °C 5...95 % r.h. < 95 % r.h. 5...95 % r.h. Humidity Siemens Electrical Actuators CA1Q4895en Building Technologies 2016-03-24...
- Page 6 Control signal OPEN, CLOSE (G0) (Y1) (Y2) Q1, Q2 Controller contacts Controller SP (+) Actuator SSC619 SP G System potential AC / DC 24 V SN, G0 System neutral (G0) Control signal SN (-) Siemens Electrical Actuators CA1Q4895en Building Technologies 2016-03-24...
- Page 7 Dimensions All dimensions in mm G¾ 115.1 132.5 Revision numbers Type reference Valid from Rev.-No. Type reference Valid from Rev.-No. SSC319 SSC619 SSC819 Siemens Electrical Actuators CA1Q4895en Building Technologies 2016-03-24...
- Page 8 Siemens Switzerland Ltd Building Technologies Division International Headquarters Gubelstrasse 22 6301 Zug Switzerland Tel. +41 41-724 24 24 © Siemens Switzerland Ltd, 2007 Technical specifications and availability subject to change without notice. www.siemens.com/buildingtechnologies Siemens Electrical Actuators CA1Q4895en Building Technologies 2016-03-24...