Effects Of Adding A Provisioned Switch To A Switch Stack - Cisco Catalyst 3560CX Series Manual
Managing switch stacks
Hide thumbs
Also See for Catalyst 3560CX Series:
- User manual (88 pages) ,
- Product overview (15 pages) ,
- Manual (24 pages)
Table of Contents
Advertisement
Effects of Adding a Provisioned Switch to a Switch Stack
Effects of Adding a Provisioned Switch to a Switch Stack
When you add a provisioned Device to the switch stack, the stack applies either the provisioned configuration
or the default configuration. This table lists the events that occur when the switch stack compares the provisioned
configuration with the provisioned switch.
Table 2: Results of Comparing the Provisioned Configuration with the Provisioned Switch
Scenario
The stack member numbers
and the Device types match.
The stack member numbers
match but the Device types
do not match.
The stack member number
is not found in the
provisioned configuration.
The stack member number
of the provisioned switch is
not found in the provisioned
configuration.
If you add a provisioned switch that is a different type than specified in the provisioned configuration to a
powered-down switch stack and then apply power, the switch stack rejects the (now incorrect) switch
stack-member-number provision type global configuration command in the startup configuration file. However,
during stack initialization, the nondefault interface configuration information in the startup configuration file
for the provisioned interfaces (potentially of the wrong type) is executed. Depending on the differences between
the actual Device type and the previously provisioned switch type, some commands are rejected, and some
commands are accepted.
Managing Switch Stacks
8
1. If the stack member number of the
provisioned switch matches the
stack member number in the
provisioned configuration on the
stack, and
2. If the Device type of the
provisioned switch matches the
Device type in the provisioned
configuration on the stack.
1. If the stack member number of the
provisioned switch matches the
stack member number in the
provisioned configuration on the
stack, but
2. The Device type of the
provisioned switch does not match
the Device type in the provisioned
configuration on the stack.
Managing Switch Stacks
Result
The switch stack applies the
provisioned configuration to the
provisioned switch and adds it to the
stack.
The switch stack applies the default
configuration to the provisioned switch
and adds it to the stack.
The provisioned configuration is
changed to reflect the new information.
The switch stack applies the default
configuration to the provisioned switch
and adds it to the stack.
The provisioned configuration is
changed to reflect the new information.
The switch stack applies the default
configuration to the provisioned switch
and adds it to the stack.
- Quick Links:
- How to Configure a Switch Stack
Hide quick links:
Advertisement
Table of Contents
