Managing An Smu - Cisco Catalyst 9200 Configuration Manual
Hide thumbs
Also See for Catalyst 9200:
- Hardware installation manual (128 pages) ,
- Installing manual (8 pages) ,
- Instructions (4 pages)
Table of Contents
Advertisement
Managing an SMU
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2
install add file location filename
Example:
Device# install add file
flash:cat9k_lite_iosxe.16.12.03.CSCvt22238.SPA.smu.bin
Device# install add file
flash:cat9k_lite_iosxe.16.12.03.CSCvt72427.SPA.smu.bin
Step 3
install activate file location filename
Example:
Device# install activate file
flash:cat9k_lite_iosxe.16.12.03.CSCvt22238.SPA.smu.bin,
cat9k_lite_iosxe.16.12.03.CSCvt72427.SPA.smu.bin
Step 4
install commit
Example:
Device# install commit
Managing an SMU
This task shows how to rollback the installation state, deactivate, and remove a previously installed SMU
package from the device. This can be used for a SMU that has been installed with the 1-step and 3-step process.
SUMMARY STEPS
1. enable
2. install rollback to {base | committed | id commit-ID}
3. install deactivate file location filename
4. install remove {file location filename | inactive}
5. show version
6. show install summary
System Management Configuration Guide, Cisco IOS XE Gibraltar 16.10.x (Catalyst 9200 Switches)
198
Purpose
Enables privileged EXEC mode. Enter your password if
prompted.
Copies the maintenance update package from flash to the
device, and then performs a compatibility check for the
platform and image versions, and adds the SMU package
on all member nodes or FRUs, as applicable. This command
also runs base compatibility checks on a file to ensure that
the SMU package is supported on the platform. It also adds
an entry in the package/SMU.sta file, so that its status can
be monitored and maintained.
You can also copy the SMU package from a remote location
(through FTP, HTTP, HTTPS, or TFTP).
Activates the SMU package file that was added and updates
the package status details. You will be promped to reload
the system in order to complete the activation process.
When entering multiple SMUs, use a comma (without a
space before or after), to separate file names. Also ensure
that total number of characters does not exceed 128. This
step involves a reload.
Commits the activation changes to be persistent across
reloads.
The commit can be done after activation while the system
is up, or after the first reload. If a package is activated but
not committed, it remains active after the first reload, but
not after the second reload.
Software Maintenance Upgrade
- Quick Links:
- Table of Contents
- Setting the System Clock
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
