Table of Contents
Advertisement
Reference: Restoring Factory Defaults on the TV(s)
This section describes how to restore all factory defaults or just the Installer Menu factory defaults either on
a single TV that is currently in Pass-through Mode, FTG Mode, Application Tuning Mode, etc. or on multiple
TVs that are currently in FTG Mode.
Restore All Factory Defaults
This section describes how to restore a single TV, regardless of its mode, to a factory default condition.
The following procedure requires that you contact LG technical support to obtain a predefined value/
password for Installer Menu item 117 FACT DEFAULT that enables access to initiate a factory "IN-STOP"
process, which restores all factory defaults. This procedure will also reactivate the First Use Wizard.
1. Use the Installer Remote to access the TV's Installer Menu.
2. Navigate to Installer Menu item 117 FACT DEFAULT, and key in the value provided by technical support.
Then, press OK.
3. At the prompt for confirmation, key in the password provided by technical support. This will initiate the
IN-STOP that restores the factory defaults on the TV.
Installer Menu Item 117 FACT DEFAULT
If the TV is currently in Pass-through Mode, you can set Installer Menu item 117 FACT DEFAULT to 1 to
restore the Installer Menu factory defaults and clear the PTC Channel Map, including any assigned
channel icons and custom text labels. Note, however, that if a complete restoration of the TV's factory
defaults is required, see "Restore All Factory Defaults" above.
Additional FTG Mode Options
There are two additional options for restoring Pass-through Mode/Installer Menu factory defaults on TVs
that are in FTG Mode. The first enables you to restore a single TV to Pass-through Mode, while the second
enables you to restore multiple TVs to Pass-through Mode at one time. However, both options require that
you create a "Restore_Pass-through_Mode.tlx" file, i.e., an FTG Configuration file with no data. Refer to the
Cloud Configuration Tool User Guide for further information.
• Using a USB memory device, import a "Restore_Pass-through_Mode.tlx" file to the TV. Refer to "Importing
a Clone File" on pages 51 to 54 for further information on the import procedure.
• If your system uses a Pro:Centric server for remote management of UT567H TVs that are in FTG Mode,
use the Pro:Centric Admin Client to load a "Restore_Pass-through_Mode.tlx" file on the Pro:Centric server.
Refer to the Pro:Centric Server Admin Client User Guide for further information.
76
206-4351
Advertisement
Table of Contents
