Cisco Catalyst 3650 Command Reference Manual page 75

Layer 2/3 command reference, cisco ios xe release 3.6e

Hide thumbs Also See for Catalyst 3650:

Table of Contents

Layer 2/3 Commands

Field

CDP device name

This is an example of output from the show udld neighbors command:

Switch# show udld neighbors

Port

-------- -------------------- ---------- -------- --------------

Gi2/0/1

Gi3/0/1

Related Commands

Command

udld

udld port

udld reset

OL-32639-01

Device Name

Device ID

Switch-A

Description

Enables aggressive or normal mode in UDLD or sets the configurable message

timer time.

Enables UDLD on an individual interface or prevents a fiber-optic interface from

being enabled by the udld global configuration command.

Resets all interfaces shut down by UDLD and permits traffic to pass through again.

Layer 2/3 Command Reference, Cisco IOS XE Release 3.6E (Catalyst 3650 Switch)

Description

The CDP device name or the system serial number.

The system serial number appears if the device name

is not set or is set to the default (Switch).

Port-ID

OperState

Gi2/0/1

Bidirectional

Gi3/0/1

Bidirectional

show udld

Table of Contents