hit counter script
Dell Inspiron 3490 Service Manual
  1. Manuals
  2. Brands
  3. Dell Manuals
  4. Laptop
  5. Inspiron 3490
  6. Service manual

Dell Inspiron 3490 Service Manual

Hide thumbs Also See for Inspiron 3490:
Table of Contents

Advertisement

Quick Links

Download this manual
Inspiron 3490
Service Manual
Regulatory Model: P89G
Regulatory Type: P89G003

Advertisement

Table of Contents
loading

Related Manuals for Dell Inspiron 3490

Summary of Contents for Dell Inspiron 3490

  • Page 1 Inspiron 3490 Service Manual Regulatory Model: P89G Regulatory Type: P89G003...
  • Page 2 A WARNING indicates a potential for property damage, personal injury, or death. © 2019 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.

  • Page 3: Table Of Contents

    Contents 1 Working inside your computer....................... 5 Safety instructions................................5 Before working inside your computer..........................5 Before you begin ................................5 Electrostatic discharge—ESD protection.......................... 6 ESD field service kit ................................6 Transporting sensitive components............................ 7 After working inside your computer............................ 7 2 Removing and installing components..................... 8 Recommended tools................................8 Screw list....................................
  • Page 4 Wireless and Bluetooth drivers............................75 4 System setup..........................76 System setup..................................76 Entering BIOS setup program............................76 Navigation keys..................................76 Boot Sequence..................................77 System setup options................................77 Clearing CMOS settings..............................81 Clearing BIOS (System Setup) and System passwords....................82 5 Troubleshooting......................... 83 Enhanced Pre-Boot System Assessment (ePSA) diagnostics..................83 Running the ePSA diagnostics.............................83 System diagnostic lights..............................

  • Page 5: Working Inside Your Computer

    You should only perform troubleshooting and repairs as authorized or directed by the Dell technical assistance team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. See the safety instructions that shipped with the product or at www.dell.com/regulatory_compliance.

  • Page 6: Electrostatic Discharge-Esd Protection

    Due to the increased density of semiconductors used in recent Dell products, the sensitivity to static damage is now higher than in previous Dell products. For this reason, some previously approved methods of handling parts are no longer applicable.

  • Page 7: Transporting Sensitive Components

    Transporting sensitive components When transporting ESD sensitive components such as replacement parts or parts to be returned to Dell, it is critical to place these parts in anti-static bags for safe transport.

  • Page 8: Removing And Installing Components

    Removing and installing components Recommended tools The procedures in this document may require the following tools: • Philips screwdriver #1 • Flat-head screwdriver • Plastic scribe Screw list NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and then place them in a screw storage box.

  • Page 9: Disassembly And Reassembly

    After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1. Loosen the three captive screws on the base cover. 2. Remove the six screws (M2.5x4) that secure the base cover to the palm-rest and keyboard assembly.
  • Page 10 3. Pry the base cover from the top-right corner of the palm-rest and keyboard assembly. 4. Lift the base cover off the palm-rest and keyboard assembly from the right side of the base cover. NOTE: The following steps are applicable only if you want to further remove any other component from your computer.
  • Page 11 After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1. Connect the battery cable to the system board, if applicable. CAUTION: To avoid accidental damage to the power-adapter port, do not press the base cover against the power- adapter port when you snap the base cover to the computer base.
  • Page 12 2. Align and place the base cover on the palm-rest and keyboard assembly. 3. Snap the base cover into place. Removing and installing components...
  • Page 13 4. Replace the six screws (M2.5x4) that secure the base cover to the palm-rest and keyboard assembly. 5. Tighten the three captive screws that secure the base cover to the palm-rest and keyboard assembly. Removing and installing components...

  • Page 14: Battery

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Lithium-ion battery precautions CAUTION: • Exercise caution when handling Lithium-ion batteries.
  • Page 15 If the battery gets stuck inside your computer as a result of swelling, do not try to release it as puncturing, bending, or crushing a lithium-ion battery can be dangerous. In such an instance, contact Dell technical support for assistance. See www.dell.com/contactdell.

  • Page 16: Memory Modules

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites Remove the base cover. Procedure 1.
  • Page 17 After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1. Align the notch on the memory module with the tab on the memory-module slot. 2. Slide the memory module firmly into the slot at an angle.

  • Page 18: Wireless Card

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites Remove the base cover. Procedure 1.
  • Page 19 2. Remove the screw (M2x3) that secures the wireless-card bracket to the system board. 3. Slide and remove the wireless-card bracket from the wireless card. 4. Disconnect the antenna cables from the wireless card. 5. Slide and remove the wireless card from the wireless-card slot. Removing and installing components...
  • Page 20 After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure CAUTION: To avoid damage to the wireless card, do not place any cables under it.

  • Page 21: Coin-Cell Battery

    After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. CAUTION: Removing the coin-cell battery resets the BIOS setup program’s settings to default. It is recommended that you note the BIOS setup program’s settings before removing the coin-cell battery.
  • Page 22 After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure With the positive-side facing up, snap the coin-cell battery into the battery socket on the I/O board. Removing and installing components...

  • Page 23: Fan

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites Remove the base cover. Procedure 1.
  • Page 24 After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1. Align the screw holes on the fan with the screw holes on to the palm-rest and keyboard board assembly. 2. Route the display cable through the routing guides on the fan.

  • Page 25: Heat Sink

    After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. NOTE: The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before you touch it.
  • Page 26 After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. CAUTION: Incorrect alignment of the heat sink can damage the system board and processor. NOTE: If either the system board or the heat sink is replaced, use the thermal pad/paste provided in the kit to ensure that thermal conductivity is achieved.

  • Page 27: Solid-State Drive/Intel Optane

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites Remove the base cover. Procedure to remove the M.2 2230 solid-state drive 1.
  • Page 28 5. Turn the solid-state drive shield over. 6. Remove the screw (M2x2) that secures the solid-state drive to the solid-state drive shield. 7. Lift the solid-state drive off the solid-state drive shield. Procedure to remove the M.2 2280 solid-state drive 1.
  • Page 29 After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive. Procedure to replace the M.2 2230 solid-state drive 1.
  • Page 30 3. Align the notch on the solid-state drive with the tab on the solid-state drive slot. 4. Slide the solid-state drive into the solid-state drive slot. 5. Insert the tab of the solid-state drive shield into the slot on the palm-rest and keyboard assembly. 6.

  • Page 31: Hard Drive

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. CAUTION: Hard drives are fragile. Exercise care when handling the hard drive. CAUTION: To avoid data loss, do not remove the hard drive while the computer is in sleep or on state.
  • Page 32 4. Disconnect the interposer from the hard-drive assembly. 5. Remove the four screws (M3x3) that secure the hard-drive bracket to the hard drive. 6. Lift the hard-drive bracket off the hard drive. Removing and installing components...
  • Page 33 After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. CAUTION: Hard drives are fragile. Exercise care when handling the hard drive. Procedure 1.
  • Page 34 4. Align the screw holes on the hard-drive assembly with the screw holes on the palm rest and keyboard assembly. 5. Replace the four screws (M2x3) that secure the hard-drive assembly to the palm rest and keyboard assembly. 6. Connect the hard-drive cable to the system board and close the latch to secure the cable. Post-requisites 1.

  • Page 35: Touchpad

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1. Remove the base cover. 2. Remove the battery.
  • Page 36 After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure NOTE: Ensure that the touchpad is aligned with the guides available on the palm-rest and keyboard assembly, and the gap on either sides of the touchpad is equal.
  • Page 37 3. Place the touchpad bracket into the slot on the palm rest and keyboard assembly. 4. Replace the two screws (M2x2) that secure the touchpad bracket to the palm rest and keyboard assembly. 5. Adhere the tape that secures the touchpad to the palm rest and keyboard assembly. 6.

  • Page 38: Speakers

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1. Remove the base cover. 2. Remove the solid-state drive/Intel Optane.
  • Page 39 After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure NOTE: If the rubber grommets are pushed out when removing the speakers, push them back in before replacing the speakers.

  • Page 40: I/O Board

    After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites CAUTION: Removing the coin-cell battery resets the BIOS setup program’s settings to default. Before removing the I/O board along with the coin-cell battery, it is recommended to note the BIOS setup program’s settings.
  • Page 41 After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1. Using the alignment posts, place the I/O board on the palm-rest and keyboard assembly. 2. Replace the two screws (M2x4) that secure the I/O board to the palm rest and keyboard assembly.

  • Page 42: Display Assembly

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1. Remove the base cover. 2. Remove the wireless card.
  • Page 43 5. Lift the palm-rest and keyboard assembly at an angle. Removing and installing components...
  • Page 44 6. Slide and remove the palm-rest and keyboard assembly off the display assembly. 7. After performing all the above steps, you are left with display assembly. Removing and installing components...
  • Page 45 After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure NOTE: Ensure that the hinges are opened to the maximum before replacing the display assembly on the palm-rest and keyboard assembly.
  • Page 46 3. Replace the four screws (M2.5x4) that secure the display hinges to the system board and I/O board. 4. Route the display cable through the routing guides on the palm-rest and keyboard assembly. 5. Connect the display cable to the system board. 6.

  • Page 47: Power-Button Board

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1. Remove the base cover. 2. Remove the battery.
  • Page 48 After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1. Place the power-button board into the slot on the palm rest and keyboard assembly. 2. Replace the two screws (M2x3) that secure the power-button board to the palm rest and keyboard assembly.

  • Page 49: System Board

    After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. NOTE: Your computer’s Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup program after you replace the system board.
  • Page 50 2. Remove the battery. 3. Remove the memory modules. 4. Remove the wireless card. 5. Remove the fan. 6. Remove the heat sink. 7. Remove the solid-state drive/Intel Optane. Procedure 1. Remove the two screws (M2.5x5) that secure the left display hinge to the palm-rest and keyboard assembly. 2.
  • Page 51 After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. NOTE: Your computer’s Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup program after you replace the system board.
  • Page 52 3. Connect the power-adapter port cable and speaker cable to the system board. 4. Slide the power-button board cable into the connector on the system board and close the latch to secure the cable. 5. Slide the finger-print reader cable into the connector on the system board and close the latch to secure the cable. NOTE: For computers shipped with finger-print reader only.

  • Page 53: Power Button With Fingerprint Reader

    Entering the Service Tag in the BIOS setup program 1. Turn on or restart your computer. 2. Press F2 when the Dell logo is displayed to enter the BIOS setup program. 3. Navigate to the Main tab and enter the Service Tag in the Service Tag Input field.
  • Page 54 For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. NOTE: Applicable only for computers that are shipped with fingerprint reader. Prerequisites 1. Remove the base cover. 2. Remove the battery. 3. Remove the memory modules.
  • Page 55 For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. NOTE: Applicable only for computers that are shipped with fingerprint reader. Procedure 1. Using the alignment posts, align and place the power button on the palm rest and keyboard assembly.

  • Page 56: Power-Adapter Port

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1. Remove the base cover. 2. Remove the battery.

  • Page 57: Palm-Rest And Keyboard Assembly

    For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1. Place the power-adapter port into the slot on the palm-rest and keyboard assembly. 2. Adhere the power-adapter port cable to the palm-rest and keyboard assembly.
  • Page 58 Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Removing and installing components...
  • Page 59 Procedure Place the palm-rest and keyboard assembly on a flat surface. Post-requisites 1. Replace the power-adapter port. 2. Replace the power button with fingerprint reader (optional). 3. Replace the system board. 4. Replace the power-button board(optional). 5. Replace the display assembly.

  • Page 60: Display Bezel

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1. Remove the base cover. 2. Remove the wireless card.
  • Page 61 After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1. Align the display bezel with the display back-cover and antenna assembly, and then gently snap the display bezel into place.
  • Page 62 2. Insert the tabs on the display-hinge cover to the slots on the display back-cover and antenna assembly. 3. Snap the display-hinge cover into place. Removing and installing components...

  • Page 63: Camera

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1. Remove the base cover. 2. Remove the wireless card.
  • Page 64 After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1. Connect the camera cable to the camera module. 2. Using the alignment post, adhere the camera module on the display back-cover and antenna assembly.

  • Page 65: Display Panel

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1. Remove the base cover. 2. Remove the wireless card.
  • Page 66 2. Lift the display panel and turn it over. 3. Peel the tape that secures the display cable to the back of the display panel. 4. Open the latch and disconnect the display cable from the display-panel cable connector. NOTE: Do not pull and release the Stretch (SR) Tapes from the display panel.
  • Page 67 After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1. Place the display panel on a flat and clean surface. 2. Connect the display cable to the connector at the back of the display panel and close the latch to secure the cable.

  • Page 68: Display Hinges

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1. Remove the base cover. 2. Remove the wireless card.
  • Page 69 After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1. Align the screw holes on the display hinges with the screw holes on the display back-cover and antenna assembly. 2. Replace the ten screws (M2x2) that secure the hinges to the display back-cover and antenna assembly .

  • Page 70: Display Cable

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1. Remove the base cover. 2. Remove the fan.
  • Page 71 After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1. Place the display cable and camera cable on the display back-cover and antenna assembly. 2. Route the display cable and camera cable through the routing guides on the display back-cover and antenna assembly.

  • Page 72: Display Back-Cover And Antenna Assembly

    Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1. Remove the base cover. 2. Remove the wireless card.
  • Page 73 After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure Place the display back-cover and antenna assembly on a clean and flat surface. Removing and installing components...
  • Page 74 Post-requisites 1. Replace the display cable. 2. Replace the display hinges. 3. Replace the display panel. 4. Replace the camera. 5. Replace the display bezel. 6. Replace the display assembly. 7. Replace the fan. 8. Replace the wireless card. 9. Replace the base cover.

  • Page 75: Device Drivers

    Device drivers Intel Chipset Software Installation Utility In the Device Manager, check if the chipset driver is installed. Install the Intel chipset updates from www.dell.com/support. Video drivers In the Device Manager, check if the video driver is installed. Install the video driver update from www.dell.com/support.

  • Page 76: System Setup

    Entering BIOS setup program 1. Turn on (or restart) your computer. 2. During POST, when the DELL logo is displayed, watch for the F2 prompt to appear, and then press F2 immediately. NOTE: The F2 prompt indicates that the keyboard is initialized. This prompt can appear very quickly, so you must watch for it, and then press F2.

  • Page 77: Boot Sequence

    Boot Sequence allows you to bypass the System Setup–defined boot device order and boot directly to a specific device (for example: optical drive or hard drive). During the Power-on Self Test (POST), when the Dell logo appears, you can: •...
  • Page 78 General-System Information Core Count Displays the number of cores on the processor. Processor ID Displays the processor identification code. Current Clock Speed Displays the current processor clock speed. Minimum Clock Speed Displays the minimum processor clock speed. Maximum Clock Speed Displays the maximum processor clock speed.
  • Page 79 System Configuration SMART Reporting Enable or disable SMART Reporting during system startup. USB Configuration Enable Boot Support Enable or disable booting from USB mass storage devices such as external hard drive, optical drive, and USB drive. Enable External USB Port Enable or disable booting from USB mass storage devices connected to external USB port.
  • Page 80 Secure Boot Secure Boot Mode Modifies the behavior of Secure Boot to allow evaluation or enforcement of UEFI driver signatures. Expert Key Management Expert Key Management Enable or disable Expert Key Management. Custom Mode Key Management Select the custom values for expert key management. Table 8.

  • Page 81: Clearing Cmos Settings

    SupportAssist System Resolution Auto OS Recovery Threshold Control the automatic boot flow for SupportAssist System Resolution Console and for Dell OS Recovery tool. SupportAssist OS Recovery Enable or disable the boot flow for SupportAssist OS Recovery tool in the even of certain system errors.

  • Page 82: Clearing Bios (System Setup) And System Passwords

    Clearing BIOS (System Setup) and System passwords To clear the system or BIOS passwords, contact Dell technical support as described at www.dell.com/contactdell. NOTE: For information on how to reset Windows or application passwords, refer to the documentation accompanying Windows or your application.

  • Page 83: Troubleshooting

    Running the ePSA diagnostics 1. Turn on your computer. 2. As the computer boots, press the F12 key as the Dell logo appears. 3. On the boot menu screen, select the Diagnostics option. 4. Click the arrow at the bottom left corner.

  • Page 84: Recovering The Operating System

    You can also download it from the Dell Support website to troubleshoot and fix your computer when it fails to boot into their primary operating system due to software or hardware failures.

  • Page 85: Flashing The Bios

    You may need to flash (update) the BIOS when an update is available or when you replace the system board. Follow these steps to flash the BIOS: 1. Turn on your computer. 2. Go to www.dell.com/support. 3. Click Product support, enter the Service Tag of your computer, and then click Submit. NOTE: If you do not have the Service Tag, use the auto-detect feature or manually browse for your computer model.

  • Page 86: Wifi Power Cycle

    5. Restart the computer and press F12 when the Dell logo is displayed on the screen. 6. Boot to the USB drive from the One Time Boot Menu. 7. Type the BIOS setup program filename and press Enter. 8. The BIOS Update Utility appears. Follow the instructions on the screen to complete the BIOS update.

Table of Contents