Related Manuals for Zanussi ZDF26001WA
Summary of Contents for Zanussi ZDF26001WA
- Page 1 User Manual GETTING STARTED? EASY. ZDF26001WA ZDF26001XA EN User Manual Dishwasher...
-
Page 2: Safety Information
SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. -
Page 3: Safety Instructions
Do not keep the appliance door open without supervision to • prevent to fall on it. Before any maintenance operation, deactivate the appliance • and disconnect the mains plug from the socket. Do not use high pressure water sprays and/or steam to clean •... - Page 4 Model : PNC : Serial Number : DISPOSAL WARNING! Risk of injury or suffocation. • Disconnect the appliance from the mains supply. • Cut off the mains cable and discard it. • Remove the door catch to prevent children and pets to get closed in the appliance.
-
Page 5: Control Panel
CONTROL PANEL On/off button Delay button Display Programme buttons Indicators INDICATORS Indicator Description XtraDry indicator. Rinse aid indicator. It is always off while the programme operates. Salt indicator. It is always off while the programme operates. - Page 6 PROGRAMMES Consumption values Degree of soil Programme Programme phases Type of load Duration Energy Water (min) (kWh) Normal soil • Prewash 1.050 Crockery and • Wash 50 °C cutlery • Rinses • • Prewash 40 - 150 0.6 - 1.4 7 - 12 Crockery, cut- •...
-
Page 7: Reset Function
SETTINGS PROGRAMME SELECTION MODE The appliance is in programme selection mode when the programme indicator is flashing and the display shows the programme duration. When the appliance is in programme selection mode, it is possible to set a programme and to enter the user mode. - Page 8 THE WATER HARDNESS TABLE German degrees French degrees Water softener mmol/l Clarke degrees (°dH) (°fH) level 47 -50 84 - 90 8.4 - 9.0 58 - 63 43 - 46 76 - 83 7.6 - 8.3 53 - 57 37 - 42 65 - 75 6.5 - 7.5 46 - 52...
-
Page 9: Before First Use
DEACTIVATING THE RINSE AID EMPTY NOTIFICATION While the appliance is in user mode: 1. Press • The indicators are off. • The indicator continues to flash. • The display shows the current setting: – = rinse aid empty notification activated. –... -
Page 10: Daily Use
ADDING RINSE AID The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot rinse phase. DAILY USE 1. Open the water tap. • If the rinse aid indicator is on, fill the rinse 2. -
Page 11: Starting A Programme
• 5 minutes after the completion of the programme. • After 5 minutes if the programme has not started. STARTING A PROGRAMME 1. Keep the appliance door ajar. 2. Press the on/off button to activate the appliance. Make sure that the appliance is in programme selection mode. - Page 12 OPTION DELAY max. 1. Press Delay until the display shows the delay time you want to set. 2. Close the appliance door, the countdown starts. The countdown starts to decrease with steps of 1 hour. When the countdown is completed the programme starts. OPENING THE DOOR WHILE THE APPLIANCE OPERATES If you open the door while a programme is running, the appliance stops.
-
Page 13: Hints And Tips
HINTS AND TIPS GENERAL the tableware, we recommend that you use the tablets with long programmes. The following hints will ensure optimal cleaning and • Do not use more than the correct quantity of drying results in daily use and also help to protect detergent. -
Page 14: Care And Cleaning
• The programme is applicable for the type of load 2. First remove items from the lower basket, then and for the degree of soil. from the upper basket. • The correct quantity of detergent is used. At the end of the program water can UNLOADING THE BASKETS still remain on the sides and on the door of the appliance. -
Page 15: Troubleshooting
• To maintain the performance of your appliance Follow carefully the instructions on the at its best, we recommend to use monthly a packaging of the product. specific cleaning product for dishwashers. TROUBLESHOOTING If the appliance does not start or it stops during With some problems, the display shows an operation. - Page 16 Problem and alarm code Possible cause and solution Small leak from the appliance • The appliance is not levelled. Loosen or tighten the adjustable door. feet (if applicable). • The appliance door is not centred on the tub. Adjust the rear foot (if applicable).
- Page 17 Problem Possible cause and solution There are stains and dry water • The released quantity of rinse aid is not sufficient. Adjust the drops on glasses and dishes. rinse aid level to a higher level. • The quality of the rinse aid can be the cause. The dishes are wet.
-
Page 18: Technical Information
Refer to "Before first use", "Daily use" or "Hints and tips" for other possible causes. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 600 / 850 / 625 Voltage (V) 220 - 240 Electrical connection Frequency (Hz) Water supply pressure Min. - Page 20 WWW.ZANUSSI.COM/SHOP...