Page 1
[eHELP] (Built-in Operating Instructions). How to use [eHELP] (p. 17) Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. Please carefully read the “Safety Precautions” of this manual before use.
For information about the trademarks, refer to [eHELP] (Support > Licence). The illustration for TX-49DXW604 is used in this Contents manual unless otherwise mentioned. Illustrations shown may be different depending on Be Sure to Read the model. Important Notice··················································· 3 Safety Precautions ···············································...
Panasonic has no authority to and does not grant you that permission and explicitly disclaims any right, ability or intention to obtain such permission on your behalf.
Do not use an unapproved pedestal / mounting Consequently, the mains plug should be easily equipment. Be sure to ask your local Panasonic accessible at all times. dealer to perform the setup or installation of approved wall-hanging brackets.
Page 5
Do not use the pedestal if it becomes warped or Caution physically damaged. If this occurs, contact your nearest Panasonic dealer immediately. Allow sufficient space (at least 10 cm) around the TV in order to help prevent excessive heat, which could lead During setup, make sure that all screws are securely to early failure of some electronic components.
Page 6
Declaration of Conformity (DoC) If you hear a drumming noise in your ears, turn down “Hereby, Panasonic Corporation declares that this TV is the volume or temporarily stop using the headphones. in compliance with the essential requirements and other Battery for the Remote Control relevant provisions of the Directive 1999/5/EC.”...
Accessories Assembling / Removing the pedestal Assembly screw (4) M5 × 10 Standard accessories Assembly screw (4) Remote Control (p. 14) M4 × 12 N2QAYB001009 Bracket (2) Pedestal (p. 7) Base Mains lead (p. 10) Batteries (2) Assembling the pedestal Select a method to assemble the pedestal from the (p.
Page 9
<Style2> Removing the pedestal from the TV Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the 1 Remove the assembly screws from the TV. 2 Pull out the pedestal from the TV. 3 Remove the assembly screws from the bracket.
Connections Basic connections Mains lead External equipment and cables shown are not supplied with this TV. Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any AC 220-240 V cables. 50 / 60 Hz Check the terminal type and cable plugs are correct for connection.
Page 11
DVB-via-IP client connection AV devices This TV has DVB-via-IP client function and can connect DVD Recorder / VCR to DVB-via-IP server or SAT>IP compatible servers to receive broadcast streaming. It is recommended to connect to DVB-via-IP server with a LAN cable. Wired connection Cable Cable...
Page 12
Network [Mode2]: For the 4K compatible equipment that has the A broadband network environment is required to be able function to output the image precisely with the to use internet services. expanded colour gamut If you do not have any broadband network services, To change the mode please consult your retailer for assistance.
Page 13
Amplifier (listening with external speakers) Common Interface Use HDMI2 to connect the TV to an amplifier which Turn the TV off with Mains Power On / Off switch has ARC (Audio Return Channel) function. whenever inserting or removing the CI module. If connecting to an amplifier without ARC function, If a smart card and a CI module come as a set, first use DIGITAL AUDIO.
Watching TV How to Use eHELP >H+(/3@ LV WKH GHWDLOHG RSHUDWLQJ LQVWUXFWLRQV EXLOW LQWR Turn power on WKH 79 DQG JLYHV D PRUH GHWDLOHG H[SODQDWLRQ IRU D EHWWHU XQGHUVWDQGLQJ RI WKH RSHUDWLRQ RI HDFK IHDWXUH 79 Display [eHELP] 5HPRWH &RQWURO 0DLQV SRZHU 2Q 2II VZLWFK VKRXOG EH RQ S 'LVSOD\V LQIRUPDWLRQ EDU RQ WKH HGJH RI VFUHHQ IRU...
Adjust using the slide bar How to Use Menu Sharpness Moved Functions change store Various menu items allow you to make settings for the picture, sound, and other functions. Go to the next screen Child Lock Display the menu access Displays the functions that can be set (varies according to the input signal).
Sound Changing Picture Display the menu and select [Sound] and Sound settings select Sound access Picture Select [Mode] Display the menu and select [Picture] select select Picture access access Select the sound mode Select [Viewing Mode] select You can select your favourite mode for each input. [Standard]: access Provides the suitable sound quality for all types of...
Retuning from Setup Set [Search Mode] / [Scan Mode] After settings, select [Start scan]. Menu A confirmation screen is displayed and press the OK button to start Auto Automatically retunes the channels received in the area. Setup (Settings are made automatically) This function is available if channel tuning is already performed.
Tuning and Editing DVB-via-IP Channels Select DVB-via-IP You can retune channels, create your favourite channel Display the menu and select [Setup] lists, skip unwanted channels, etc. For details, refer to [eHELP] (Watching > Tuning and select editing channels). Setup access Select the mode Select [DVB-via-IP Tuning Menu] select...
/ unlock How to change the code : Appears when the channel / input is locked Each Panasonic product has its own remote control code. Change the code according to the product for To lock all operation. (green)
Viewing Teletext Type of the equipment, features Code DVD Recorder, DVD Player, Blu-ray Disc Player Teletext services are the text information provided by the Player theatre, Blu-ray Disc broadcaster. theatre The features may vary depending on the broadcaster. For details, refer to [eHELP] (Watching > Teletext). Using in USB HDD Recording, TOP mode (For TOP text broadcasting) Media Player, DLNA features or...
Using TV Guide Select the page Coloured buttons TV Guide - Electronic Programme Guide (EPG) provides (Corresponds to the colour an on-screen listing of the programmes currently bar) broadcast and the forthcoming broadcasts over the next seven days (depending on the broadcaster). Watch TV and teletext in two windows at When this TV is turned on for the first time, or the once...
[Timer Programming] USB HDD Recording Select the forthcoming programme select You can record the digital TV programmes to the access connected USB HDD and enjoy playing back in various To check / change / cancel a timer event (p. 27) ways.
Page 26
This recording may not start if another recording is in Select the USB HDD for recording and progress, TV signal condition is bad or there are no start setup images displayed. USB Device Setup To operate [REW LIVE TV] Product Name To pause USB Drive A...
[Signal Supported Recording] (if available) Timer Programming This function is Timer Programming which is controlled by information from the TV Guide; if programme start and end times are changed This function allows you to select programmes that you by the broadcaster, the timer event will follow want to record to the USB HDD.
Using Media Player Select the device (USB Flash Memory / USB HDD / network device) select Media Player allows you to enjoy photo, video or music recorded on the USB Flash Memory / network device, access and content recorded with this TV to the formatted USB When a confirmation screen about the network device HDD.
Wired connection (For DLNA and internet Using Home Network service) DLNA ® This TV is a DLNA Certified™ product. DLNA (Digital Living Network Alliance) is a standard that makes DLNA Certified digital electronics easier and more convenient to use on a home network. To learn more, visit www.dlna.org.
Page 30
Sharing the TV programme or content ® Using DLNA features of this TV with another piece of network Ensure the preparations of the media server, network equipment connections and network settings are completed. You can enjoy the current digital TV programme or the content of this TV on the other DLNA Certified VIERA, Playback of sharing content stored in the your smartphone, etc.
Parts of the TV become hot FAQs Parts of the TV may become hot. These temperature rises do not pose any problems in terms of performance or quality. Before requesting service or assistance, please follow these simple guides to solve the problem. When pushed with a finger, the display panel moves For details, refer to [eHELP] (Support >...
Maintenance Specifications First, remove the mains plug from the mains socket. Model No. : TX-40DXW604 40-inch model Display panel, Cabinet, Pedestal : TX-49DXW604 49-inch model Regular care: : TX-55DXW604 55-inch model Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to remove dirt or Dimensions (W ×...
Page 33
PAL B, G, H, I Connection terminals SECAM B, G AV input (COMPONENT / VIDEO) SECAM L, L’ VIDEO VHF E2 - E12 RCA PIN Type × 1 VHF A - H (ITALY) 1.0 V[p-p] (75 :) CATV (S01 - S05) AUDIO L - R CATV S11 - S20 (U1 - U10) RCA PIN Type ×...
Page 34
When using the wall-hanging bracket *: The frequency and channel differ depending on the country. Please contact your local Panasonic dealer to purchase the recommended wall-hanging bracket. Note Design and Specifications are subject to change Holes for wall-hanging bracket installation without notice.