11. TECHNICAL INFORMATION..................21 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference.
Do not use water spray and steam to clean the • appliance. Clean the appliance with a moist soft cloth. Only use • neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects. Do not store explosive substances such as aerosol •...
Page 5
ENGLISH • Do not change the specification of • Before maintenance, deactivate the this appliance. appliance and disconnect the mains • Do not put electrical appliances (e.g. plug from the mains socket. ice cream makers) in the appliance • This appliance contains hydrocarbons unless they are stated applicable by in the cooling unit.
3. OPERATION 3.1 Control panel Fridge Pilot light Freezer temperature regulator / + button Fridge ON/OFF switch Freezer temperature indicator Fridge temperature regulator /+ Freezer temperature regulator / - button button Fridge temperature indicator FROSTMATIC indicator Fridge temperature regulator / -...
Page 7
ENGLISH When the setting is changed When normal conditions are the compressor does not restored, the alarm stop start immediately if flashing and the buzzer turn automatic defrosting is off automatically. currently taking place. As the storage temperature in the 3.8 COOLMATIC function fridge is reached quickly The COOLMATIC function is suitable for...
3.11 DYNAMICAIR function long holiday period without the formation of a bad smell. To switch on the function: The fridge compartment • Press the DYNAMICAIR button. must be empty when the The DYNAMICAIR indicator is shown. holiday function is on.
Page 9
ENGLISH 5.2 Movable shelves opening or when the ambient temperature is high. The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired. The DYNAMICAIR device stops when the door is open and restarts immediately Do not move the glass shelf after the door closing.
5.8 Ice-cube production WARNING! In the event of accidental This appliance is equipped with one or defrosting, for example due more trays for the production of ice- to a power failure, if the cubes. power has been off for...
ENGLISH • Cooked foods, cold dishes: cover and • do not allow fresh, unfrozen food to place on any shelf. touch food which is already frozen, • Fruit and vegetables: clean thus avoiding a rise in temperature of thoroughly and place in a special the latter;...
7.2 Periodic cleaning the refrigerator compartment channel to prevent the water overflowing and CAUTION! dripping onto the food inside. Do not pull, move or damage any pipes and/or cables inside the cabinet. CAUTION! Take care of not to damage the cooling system.
Page 13
ENGLISH 8.1 What to do if... Problem Possible cause Solution The appliance does not op- The appliance is switched Switch on the appliance. erate. off. The mains plug is not con- Connect the mains plug to the nected to the mains socket mains socket correctly.
Page 14
Problem Possible cause Solution The compressor does not This is normal, no error has The compressor starts after a start immediately after occurred. period of time. pressing the COOLMATIC, or after changing the tem- perature. Water flows on the rear During the automatic de- This is correct.
ENGLISH 9. INSTALLATION 9.1 Positioning Install the appliance in a dry, well ventilated indoors where the ambient temperature corresponds to the climate class indicated on the rating plate of the appliance. Climate Ambient temperature class +10°C to + 32°C +16°C to + 32°C +16°C to + 38°C •...
Page 16
9.3 Ventilation requirements 7. Tighten the lower pin on the opposite side. The airflow behind the appliance must be sufficient. min. 5 cm 200 cm min. 200 cm 8. Install the lower spacer. 9. Install the door. 10. Refit the pins (B) and the spacers (C)
Page 17
ENGLISH Make sure that the distance between the appliance and the cupboard front-edge is 44 mm. The lower hinge cover (in the accessories bag) makes sure that the distance between the appliance and the kitchen furniture is correct. Make sure that the clearance between the appliance and the cupboard is 4 mm.
Page 18
11. Attach the covers (C, D) to the lugs and the hinge holes. 16. Tighten the screws. 17. Disconnect the parts (Ha), (Hb), (Hc) and (Hd). 18. Install the part (Ha) on the inner side of the kitchen furniture.
Page 19
ENGLISH 24. Place the small square on the guide again and fix it with the screws supplied. 25. Align the kitchen furniture door and the appliance door by adjusting the part (Hb). 20. Open the appliance door and the kitchen furniture door at an angle of 90°.
ENGLISH BLUBB! BLUBB! CRACK! CRACK! 11. TECHNICAL INFORMATION 11.1 Technical data Dimensions of the recess Height 1850 Width Depth Rising time Hours Voltage Volts 230 - 240 Frequency The technical information is situated in internal side of the appliance and in the the rating plate, on the external or energy label.