Safety information General Safety guidelines For tips to help you use your computer safely, go to: http://www.lenovo.com/safety Before installing this product, read the Safety Information. í í í...
Chapter 1. Getting started This User’s Guide contains detailed information on the your Flat Panel Monitor. For a quick overview, please see the Setup Poster that was shipped with your monitor. Shipping contents The product package should include the following items: •...
Product overview This section will provide information on adjusting monitor positions, setting user controls, and using the cable lock slot. Types of adjustments Tilt Please see the illustration below for an example of the tilt range. Chapter 1.
Monitor controls Your monitor has controls on the front which are used to adjust the display. For information on how to use these controls, please see "Adjusting your monitor image"on page 2-3. Cable lock slot Your monitor is equipped with a cable lock slot located on the rear of your monitor (in the lower position).
Setting up your monitor This section provides information on how to set up your monitor. Connecting and turning on your monitor Note: Be sure to read the Safety information located on page iii before carrying out this procedure. Power off your computer and all attached devices, and unplug the computer power cord. Connect the cables according to below icon indication.
Page 9
Connect the digital cable to the DP connector of the monitor and the other end on the back of the computer. Note 1: Lenovo recommends that customers who require to use the DP Cable on their monitor purchase the " Lenovo DisplayPort to DisplayPort Cable 0A36537 "www.lenovo.com/support/monitor accessories.
Page 10
Power on the monitor and the computer. When you install the monitor driver, download the driver that corresponds to your monitor model from the Lenovo website http://support.lenovo.com/docs/E21_10. Refer to the “"Manually installing the monitor driver"on page 3-5” section to install the driver.
Page 11
To optimize your monitor image,press the Automatic Image Setup key.Automatic image setup requires that the monitor is warmed up for at least 15 minutes.This is not required for normal opearation. Note: If automatic image setup does not establish the image that you prefer, perform manual image setup.
Thank you for purchasing this Lenovo™ product. Please take a few moments to register your Product and provide us with information that will help Lenovo to better serve you in the future. Your feedback is valuable to us in developing product and services that are important to you, as well as in developing better ways to communicate with you.
For more detailed information on any of these topics, visit the Healthy Computing Web site at: http://www.lenovo.com/healthycomputing/. Arranging your work area Use a work surface of appropriate height and available working area to allow you to work in comfort.
Accessibility information Lenovo is committed to providing greater access to information and technology to people with disabilities. With assistive technologies, users can access information in the way most appropriate to their disability. Some of these technologies are already provided in your operating system;...
Adjusting your monitor image This section describes the control features to adjust your monitor image. Using the direct access controls The direct access controls can be used when the On-Screen Display (OSD) is not displayed. Icon Control Description Input Source Switches the video input source.
Using the On-Screen Display (OSD) controls To adjust the settings, the user controls can be viewed through the OSD. Adjusts overall screen Brightness/Contrast/DCR Exit To use the controls: Press to open the main OSD menu. to move among the icons. Select an icon and press to access the selected function.
Page 17
Table 2-1. OSD functions OSD Icon on Main Controls and Submenu Description Menu Adjustments (DP) Brightness Adjusts overall screen brightness Same as Analog Contrast Adjusts difference between light and dark areas • Brightness/ • Contrast/DCR Horizontal Position Moves image left or right. Controls Locked - not required for Vertical Position...
Page 18
Table 2-1. OSD functions OSD Icon on Main Controls and Submenu Description Menu Adjustments (DP) Information Shows resolution, refresh rate, and product details. Same as Analog Note: This screen offers information only, and Options (does) not allow for setting changes. Language Changes languages of menu.
Selecting a supported display mode The display mode of the monitor uses is controlled by the computer. Therefore, refer to your computer documentation on how to change display modes. The image size, position and shape might be changed when the display mode changes.
Understanding power management Power management is invoked when the computer recognizes that you have not used your mouse or keyboard for a user-definable period. There are several states as described in the table below. For optimal performance, switch off your monitor at the end of each working day, or whenever you expect to leave it unused for long periods during the day.
Caring for your monitor Be sure to turn off the power before you perform any maintenance on the monitor. Do not: • Apply water or liquid directly to your monitor. • Use solvents or abrasives. • Use flammable cleaning materials to clean your monitor or any other electrical equipment.
Page 22
Step 3: Remove the base and stand from the monitor, refer to "Detaching the monitor base and stand"on page 2-9". Step 4: Attach the mounting bracket from the VESA compatible wall mounting kit (100mm x100mm distance), the type of VESA mounting screw is M4 x 10 mm. VESA hole Step 5: Attach the LCD display to the wall, follow the instructions in the wall- mounting kit.
Chapter 3. Reference information This section contains monitor specifications, instructions to manually install the monitor driver, troubleshooting information, and service information. Monitor specifications Table 3-1. Monitor specifications for type-model 61B9-JAR1-WW Dimensions Depth 204.9 mm (8.07 in.) 370.9 mm (14.60 in.) Height 490.5 mm (19.31 in.) Width...
Page 24
Table 3-1. Monitor specifications for type-model 61B9-JAR1-WW Video input (DP) Interface Input signal VESA TMDS (Panel Link™) Horizontal addressability 1920 pixels (max) Vertical addressability 1080 lines (max) Clock frequency 165 MHz Communications VESA DDC/CI Supported display Horizontal frequency 30 kHz - 83 kHz modes Vertical frequency 50 Hz - 75 Hz...
Troubleshooting If you have a problem setting up or using your monitor, you might be able to solve it yourself. Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your problem. Table 3-2. Troubleshooting Problem...
Table 3-2. Troubleshooting Problem Possible cause Suggested action Reference The power The video signal cable Be sure the video cable is "Connecting and indicator is is loose or connected with the turning on your amber, but there disconnected from the system properly.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. Lenovo recommends using either 1920 x 1080 at a refresh rate of 60 Hz, or 640 x 480 at a refresh rate of 60 Hz.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. Lenovo recommends using either 1920 x 1080 at a refresh rate of 60 Hz, or 640 x 480 at a refresh rate of 60 Hz.
Scratches or punctures on monitor screens. Service parts The following parts are for use by Lenovo service, or Lenovo authorized dealers, to support the customer warranty. Parts are for service use only. The table below shows information for model 61B9-JAR1-WW.
Installation and configuration support through the Customer Support Center will be available until 90 days after the option has been withdrawn from marketing. After that time, the support is cancelled, or made available for a fee, at Lenovo’s discretion. Additional support is also available for a nominal fee.
Page 31
Country or Region Telephone Number Belgium Warranty service and support: 02-339-36-11 (Dutch, French) Bolivia 0800-10-0189 (Spanish) Brazil Calls made from within the Sao Paulo region: 11-3889-8986 Calls made from outside the Sao Paulo region: 0800-701-4815 (Portuguese) Brunei Darussalam Dial 800-1111 (English) Canada 1-800-565-3344...
Page 32
Country or Region Telephone Number Germany Warranty service and support: 0800-500-4618 (toll-free) (German) Greece Lenovo Business Partner (Greek) Guatemala Dial 999-9190, wait for operator, and request to reach 877-404-9661 (Spanish) Honduras Dial 800-0123 (Spanish) Hungary +36-13-825-716 (English, Hungarian) India Primary: 1800-419-4666 (Tata) Secondary: 1800-3000-8465 (Reliance) Email: commercialts@lenovo.com...
Page 33
Country or Region Telephone Number Nicaragua 001-800-220-2282 (Spanish) Norway 8152-1550 (Norwegian) Panama Lenovo Customer Support Center: 001-866-434 (toll-free) (Spanish) Peru 0-800-50-866 OPCION 2 (Spanish) Philippines 1-800-8908-6454 (GLOBE subscribers) 1-800-1441-0719 (PLDT subscribers) (Tagalog, English) Poland Laptops and tablets branded with logo Think: 48-22-273-9777...
Page 34
Country or Region Telephone Number Uruguay 000-411-005-6649 (Spanish) Venezuela 0-800-100-2011 (Spanish) Vietnam 120-11072 (Toll Free) 84-8-4458-1042 (Standard Charges Apply) (Vietnamese, English) Appendix A.
Collecting and recycling a disused Lenovo computer or monitor If you are a company employee and need to dispose of a Lenovo computer or monitor that is the property of the company, you must do so in accordance with the Law for Promotion of Effective Utilization of Resources.
Trademarks The following terms are trademarks of Lenovo in the United States, other countries, or both: Lenovo The Lenovo logo ThinkCenter ThinkPad ThinkVision Microsoft, Windows, and Windows NT are trademarks of the Microsoft group of companies. Other company, product, or service names may be trademarks or service marks of others.
Power cords and power adapters Use only the power cords and power adapters supplied by the product manufacturer. Do not use the ac power cord for other devices. Appendix B.