Siemens SIREMOBIL Compact Installation And Setting Instructions

Hide thumbs Also See for SIREMOBIL Compact:

Download this manual

SIREMOBIL Compact

Installation and Setting Instructions

Installing and setting the Video recorder

SIREMOBIL Compact L

SIREMOBIL Compact as of

Serial Number 02001

Print No.: SPR2-130.033.03.04.02

Replaces: SPR2-130.033.03.03.02

The reproduction, transmission or

use of this document or its contents

is not permitted without express

written authority. Offenders will be

liable for damages. All rights,

including rights created by patent

grant or registration of a utility

model

_or_ design,_are_

reserved.

English

Doc. Gen. Date: 04.01

Page 1 Installing and setting the Video recorder SIREMOBIL Compact L © S iem ens AG 1997 The reproduction, transmission or SIREMOBIL Compact as of use of this document or its contents is not permitted without express written authority. Offenders will be Serial Number 02001 liable for damages.
Page 2 The protective conductor resistance must not exceed 0.2 ohms. Additional Information These instructions apply to retrofitting a video recorder on a SIREMOBIL Compact system with Memoskop C / Memoskop C & MOD / Memoskop C-SUB / Memoskop C-SUB & MOD only.
Page 3 100VAC and 120VAC. A released video tape recorder with the corre- sponding line voltage can be connected to these connectors. At the SIREMOBIL Compact with serial numbers 01001 to 01299, only released video tape recorders with a needed line voltage of 230VAC can be connected.
Page 4 (Perform the configuration for monitor B only by special customer request). • End the user menu. • Switch the SIREMOBIL Compact off and on again to activate the new configuration. Function check • Set the video recorder to record. •...

Siremobil compact l