hit counter script
Canon PIXMA Pro9500 Series Quick Start Manual
  1. Manuals
  2. Brands
  3. Canon Manuals
  4. Printer
  5. Pixma Pro9500 Series
  6. Quick start manual

Canon PIXMA Pro9500 Series Quick Start Manual

Canon pixma pro9500: quick start
Hide thumbs Also See for PIXMA Pro9500 Series:
Table of Contents

Advertisement

Quick Links

See also: Manual , Quick Start Manual
Photo Printer
series

Quick Start Guide

Q T 5 0 1 4 5 V 0 2

Advertisement

Table of Contents
loading

Related Manuals for Canon PIXMA Pro9500 Series

Summary of Contents for Canon PIXMA Pro9500 Series

  • Page 1: Quick Start Guide

    Photo Printer series Quick Start Guide Q T 5 0 1 4 5 V 0 2...

  • Page 2: Getting Help From Canon

    CarePAK offers toll-free Canon technical support and includes Canon’s superb InstantExchange product replacement program. For further information about extending your Canon service and support, call (1-800-385-2155), or visit our Web site at www.canonesp.com. CarePAK must be purchased during your product’s warranty period.
  • Page 3 Photo Printer Quick Start Guide...
  • Page 4 This manual is copyrighted by Canon U.S.A., Inc. with all rights reserved. Under the copyright laws, this manual may not be reproduced in any form, in whole or in part, without the prior written consent of Canon U.S.A., Inc. © 2007 Canon U.S.A., Inc.

  • Page 5: Table Of Contents

    Canon U.S.A., INC. LIMITED WARRANTY --- (USA Only) ....... . .

  • Page 6: Basic Printing

    When the Help window appears, select your desired topic. Turning on the Printer Press the POWER button. The POWER lamp flashes blue while the printer warms up and changes to steady (non-flashing) when the printer is ready. If the ALARM lamp begins flashing orange, refer to Messages”...

  • Page 7: Turning Off The Printer

    When the POWER lamp stops blinking, the printer is turned off. About the Power Plug When removing the power plug after turing off the printer, be sure to check that the POWER lamp is not lit. If the power plug is removed from the wall outlet with the POWER lamp lit or blinking blue, the printer cannot protect its print heads and may be unable to print.

  • Page 8: Loading Paper

    Auto Sheet Feeder: More than 105 gsm / 28 lb (plain paper except for supported Canon genuine media) * However, you can use art paper that is not produced by Canon that is up to 200 gsm / 53 lb. See “Non-Canon Genuine Specialty Paper” in the Front Tray: More than 1.2 mm / 47 mil...

  • Page 9: Handling Paper

    Due to the nature of the pigment ink, the ink on the printed surface may be removed when being rubbed or scratched. Loading Paper in the Auto Sheet Feeder For detailed information on the Canon genuine media for use with its various printers, refer to “Printing Media” in the Flatten the four corners of the paper before loading it.
  • Page 10 Basic Printing Prepare to load paper. (2) 1 Gently press the mark on the Front Tray. 2 Pull out the Front Tray Extension completely. Load the paper. Load Limit Mark Do not load beyond this Load Limit Mark. (3) Pinch the Paper Guide and slide it against the left side of the paper stack.
  • Page 11 From 64 gsm / 17 lb to 105 gsm / 28 lb (plain paper except for supported Canon genuine media) *You can use art paper that is not produced by Canon that is up to 200 gsm / 53 lb.
  • Page 12 17, or Always load paper in portrait orientation. Loading paper in landscape orientation can cause the paper to be jammed. We recommend using Canon genuine photo media when printing photographs. (3) Ensure that the FRONT FEED button is not lit.
  • Page 13 There are wheels on the back corners of the printer. Lift up the front of the printer to move it back and forth. For detailed information on the Canon genuine media for use with its various printers, refer to “Printing Media” in the Open the Front Tray.
  • Page 14 Basic Printing Set the Front Tray in the Front Paper Feeding Position. Side view of the printer (1) Tilt the Front Tray upward. (3) While keeping the Front Tray lifted, tilt the Front Tray forward to set it in the Front Paper Feeding Position.
  • Page 15 (1) Pull out the Front Tray Extension completely. Do not load paper when the POWER lamp is flashing. Otherwise, the paper or the printer may be damaged. (1) Press the REAR SUPPORT button to open the Rear Support. (2) Press the right (3) Press the FRONT FEED button.
  • Page 16 Basic Printing Load the paper. If the printer is not used for 5 minutes or more while it is as described in (1) above, then the FRONT FEED button stops flashing and stays lit and you cannot set the paper. If this happens, return to (3) in step 4.
  • Page 17 From 0.1 mm / 4 mil to 1.2 mm / 47 mil Do not use paper thicker than this, as it could jam in the printer. When printing on other than 14" x 17" / 355.6 x 431.8 mm paper from a PictBridge compliant device, load paper in the Auto Sheet Feeder.
  • Page 18 When using the Auto Sheet Feeder, set the Front Tray to its normal printing position. Be sure to follow the procedure below when returning the Front Tray to its normal printing position. Otherwise, the printer may be damaged. When the Front Tray is set to the Front Paper Feeding Position, printing by using the Auto Sheet Feeder is not possible.

  • Page 19: Using Specialty Media

    Using Specialty Media Canon recommends that you use Canon genuine media to ensure optimal print quality. Photo Quality Media • Matte Photo Paper • Photo Paper Plus Glossy • Photo Paper Plus Semi-gloss • Fine Art Paper “Museum Etching” • Fine Art Paper “Photo Rag™”...
  • Page 20 *5 If you are using this paper, you cannot print in a 35 mm / 1.38 inches margin on the top and bottom edges. If you choose a paper size which says “Art XX [Margin 35 mm]” in the printer driver, a limit is set to prevent printing in a 35 mm / 1.38 inches margin on the top and bottom edges of the paper.

  • Page 21: Printing With Windows

    PhotoPrint and Easy-PhotoPrint Pro, refer to the screen manual. Turn on the printer. “Turning on the Printer” Load the paper in the printer. “Loading Paper in the Auto Sheet Feeder” Front Tray” on page 9. Create a document or open a file to print.
  • Page 22 Basic Printing Open the printer properties dialog box. (1) Select Print from the application software’s File menu. The Print dialog box opens. Specify the required settings. (2) Ensure that your printer is selected. (3) Click Preferences or Properties. (1) Click Media Type to select the type of media loaded in the printer.
  • Page 23 To adjust the Print Quality settings, select Custom and click Set on the Main tab. You can control the print quality in the Custom dialog box. For details about other printer driver functions, click Help or Instructions to view the Help or Instructions is displayed on the Main and Maintenance tabs only.

  • Page 24: Printing With Macintosh

    PhotoPrint and Easy-PhotoPrint Pro, refer to the screen manual. Turn on the printer. “Turning on the Printer” Load the paper on the printer. “Loading Paper in the Auto Sheet Feeder” Front Tray” on page 9. Create a document or open a file to print.
  • Page 25 Select Paper Size. (1) Select Page Setup from the application software’s File menu. The Page Setup dialog box opens. Specify the required settings. (1) Select Print from the application software’s File menu. The Print dialog box opens. Basic Printing (2) Confirm that Pro9500 series is selected in Format for.
  • Page 26 - Printing a composite document: Select when printing documents consisting mainly of text. - Detailed Setting: Select to fine-tune the Print Quality and Halftoning settings. For details about the printer driver, refer to the Guide on-screen manual. Printer Driver Guide To view the any Print dialog box that has a Quality &...
  • Page 27 Print the document. (1) Click Print. Do not open the Top Cover while printing. You can cancel a print job while printing. “Canceling Printing” on page 24. Basic Printing...

  • Page 28: Canceling Printing

    Press the RESUME/CANCEL button while printing. Printing is canceled and paper is fed out. You can also cancel a print job by clicking Cancel Printing on the Canon IJ Status Monitor. To display the Canon IJ Status Monitor, click Canon Pro9500 series on the taskbar.

  • Page 29: Advanced Printing

    Connecting a PictBridge compliant device such as a digital camera, camcorder or mobile phone to the printer allows you to print recorded images directly without using a computer. PictBridge is an industry standard enabling a range of digital photo solutions, including the Direct Printing of photos from a digital camera, camcorder or mobile phone* without the need to use a computer.
  • Page 30 (1) Make sure the device is turned off. (2) Connect the device to the printer using a USB cable recommended by the manufacturer of the device. The PictBridge compliant devices turn on automatically, when connected to the...

  • Page 31: About Pictbridge Print Settings

    Some setting items explained below may not be available on some devices. In this case, the settings made on the computer using the Canon Setup Utility are applied. Also, when some items are set to Default on a PictBridge compliant device, the computer settings for these items are applied.
  • Page 32 8.5" x 11" (Letter) 13" x 19" *1 This setting can be selected only for Canon PictBridge compliant devices (note that it cannot be selected for some models). If your device does not have this setting, select Photo or Default in Paper type.

  • Page 33: Print Settings Menu

    You can select the optimization method to obtain high print quality. When you select On, the shooting information is used to print the optimized image. If you are using a Canon-brand PictBridge compliant device, the following additional options may be available, depending on the model.
  • Page 34 Setting on the Computer You can change the PictBridge print settings on the computer. To do this, install the Canon Setup Utility from the details, refer to “Canon Setup Utility Menu (Windows)” or “Canon Setup Utility Menu User’s Guide (Macintosh)” in the...

  • Page 35: Accessing The Printer Driver (Windows)

    Accessing the Printer Driver (Windows) The printer properties dialog box can be opened from either within an application program, or directly from the Windows Start menu. Opening the Printer Properties Dialog Box from Your Application Program When specifying the printer settings before printing, follow the procedure below.

  • Page 36: Using The Bundled Software

    Canon PIXMA Printers support ExifPrint and use a suitable photo application to read the camera data precisely, producing optimal prints. This enables you to create prints that reproduce color more accurately.

  • Page 37: Printing Maintenance

    Press the RESUME/CANCEL button on the printer. The printer vibrates for about ten seconds to two minutes to shake the ink tanks. Do not open the Top Cover while the printer is operating (the POWER lamp is flashing blue). Printing Maintenance...

  • Page 38: Replacing An Ink Tank

    Replace ink tank(s) if they are out of ink. To continue printing under the ink out condition may cause the printing trouble such as the mixing of inks, or a printer malfunction. When replacing them, check the model numbers and their installation positions.

  • Page 39: Getting The Ink Level Information

    2. Click View Printer Status on the Maintenance tab. The following message will be displayed. * You can also display the Canon IJ Status Monitor by clicking the Canon IJ Status Monitor button which appears on the taskbar during printing.
  • Page 40 Printing Maintenance Open the Canon IJ Printer Utility to check the ink level information. 1. Select Applications from the Go menu, and then double-click the Utilities folder. 2. Double-click the Printer Setup Utility icon. When using Mac OS X v.10.2.8, double-click the Print Center icon.
  • Page 41 * Printing does not resume if any of the ink tanks are removed. Be sure to press the RESUME/CANCEL button with the ink tanks installed. * Continuing to print in the out of ink state will cause the remaining ink level to be displayed incorrectly in the Canon IJ Status Monitor.
  • Page 42 * Releasing the function for detecting the remaining ink level is memorised. Please be advised that Canon shall not be liable for any malfunction or trouble which may be caused by continuation of printing or refilling of ink.
  • Page 43 * Printing does not resume if any of the ink tanks are removed. Be sure to press the RESUME/CANCEL button with the ink tanks installed. * Continuing to print in the out of ink state will cause the remaining ink level to be displayed incorrectly in the Canon IJ Printer Utility.
  • Page 44 * Releasing the function for detecting the remaining ink level is memorised. Please be advised that Canon shall not be liable for any malfunction or trouble which may be caused by continuation of printing or refilling of ink.

  • Page 45: Replacing Ink Tanks

    Holder moves to the right. Close and reopen the Top Cover to return the Print Head Holder to the center. If you open the Top Cover while the printer is preparing to feed paper from the Front Tray (when the FRONT FEED button is flashing quickly), the Print Head Holder may not move to the center.
  • Page 46 35. Do not touch the electrical contacts on the ink tank. Doing so can cause the printer to malfunction or become unable to print. Do not squeeze the side of ink tanks as this may cause the ink to leak out and stain your clothes and hands.
  • Page 47 Ensure that all the ink tanks are installed in the order directed by the label. The printer cannot be used unless all the ink tanks are installed. mark on the ink tank until the ink tank snaps firmly into place.
  • Page 48 Wait until the POWER lamp displays a steady blue light and the printer has stopped making operating noises. It takes about two minutes or less. Do not open the Top Cover while the printer is operating (the POWER lamp is flashing blue).

  • Page 49: When Printing Becomes Faint Or Colors Are Incorrect

    Replacing with a new ink tank will activate this function again. Increase the Print Quality setting in the printer driver settings. “Print Results Not Satisfactory or Contains Errors” Step 1 “Printing the Nozzle Check Pattern”...
  • Page 50 Contact the Customer Care Center. When Not Using the Printer When not using the printer, close the Paper Support, Front Tray and Rear Support of your printer to retain the optimum print results. We recommend that you use the printer in the following environment: Temperature: 15 to 25°C (59 to 77°F)

  • Page 51: Printing The Nozzle Check Pattern

    Printing the Nozzle Check Pattern Without a Computer Nozzle check pattern printing can also be executed from the printer itself. 1. With the printer on, load a sheet of Letter-sized plain paper in the Auto Sheet Feeder. 2. Gently press the pull out the Front Tray Extension.
  • Page 52 Examine the pattern and take the appropriate action. “Examining the Nozzle Check Pattern” With the printer on, load a sheet of Letter-sized plain paper in the Auto Sheet Feeder. If other than Letter-sized paper is loaded, you cannot print the nozzle check pattern.
  • Page 53 When using Mac OS X v.10.2.8, double-click the Print Center icon. (3) Select the name of your printer from the Name list and click Utility. When using Mac OS X v.10.2.8, select the name of your printer from the Name list and click Configure.

  • Page 54: Examining The Nozzle Check Pattern

    Examining the Nozzle Check Pattern The nozzle check pattern should appear as follows when ink is discharged properly. Examine the nozzle check pattern output by the printer, and clean the Print Head when necessary. The nozzle check pattern will not be printed correctly if there is not enough ink.
  • Page 55 Printing Maintenance When cleaning is necessary, click Cleaning on the Pattern Check dialog box. If you want to continue to clean the Print Head from here, go to (3) in step 4 of the Windows or Macintosh Print Head Cleaning procedures as appropriate. “Print Head Cleaning”...

  • Page 56: Print Head Cleaning

    Ensure that the Inner Cover is closed. Cleaning the Print Head Without a Computer The Print Head can also be cleaned from the printer itself. With the printer on, hold down the RESUME/CANCEL button until the POWER lamp flashes blue once, and then release it immediately.
  • Page 57 Start Print Head Cleaning. Print Head Cleaning starts when the POWER lamp starts blinking blue. Do not perform any other operations until the Print Head Cleaning finishes. This takes about 120 seconds. (5) Load a sheet of Letter-sized plain paper in the Auto Sheet Feeder. If other than Letter-sized paper is loaded, you cannot print the nozzle check pattern.
  • Page 58 When using Mac OS X v.10.2.8, double-click the Print Center icon. (3) Select the name of your printer from the Name list and click Utility. When using Mac OS X v.10.2.8, select the name of your printer from the Name list and click Configure.
  • Page 59 Print Head Cleaning starts when the POWER lamp starts blinking blue. Do not perform any other operations until the Print Head Cleaning finishes. This takes about 120 seconds. (5) Load a sheet of Letter-sized plain paper in the Auto Sheet Feeder. If other than Letter-sized paper is loaded, you cannot print the nozzle check pattern.

  • Page 60: Print Head Deep Cleaning

    Ensure that the Inner Cover is closed. Ensure that the printer is on. Open the printer properties dialog box. “Opening the Printer Properties Dialog Box Directly from the Start Menu” page 31. Start Print Head Deep Cleaning. on page 41.
  • Page 61 If a particular color is not printed properly, replace the ink tank of that color. See “Replacing an Ink Tank” If the print head nozzles are still not clean, turn off the printer. Be sure to perform another Print Head Deep Cleaning 24 hours after turning off the printer.
  • Page 62 When using Mac OS X v.10.2.8, double-click the Print Center icon. (3) Select the name of your printer from the Name list and click Utility. When using Mac OS X v.10.2.8, select the name of your printer from the Name list and click Configure.
  • Page 63 If a particular color is not printed properly, replace the ink tank of that color. See “Replacing an Ink Tank” If the print head nozzles are still not clean, turn off the printer. Be sure to perform another Print Head Deep Cleaning 24 hours after turning off the printer.

  • Page 64: Aligning The Print Head

    Ensure that the Inner Cover is closed. Aligning the Print Head Without a Computer The Print Head can also be aligned from the printer itself. If the printer driver is not installed in the computer, align the print head in this way.
  • Page 65 Two pattern sheets are printed. It takes about seven minutes to complete printing. Do not open the Top Cover while printing. Print head alignment is automatically adjusted by printing the patterns. The printer is now ready to use. Printing Maintenance (1) Click the Maintenance tab.
  • Page 66 When using Mac OS X v.10.2.8, double-click the Print Center icon. (3) Select the name of your printer from the Name list and click Utility. When using Mac OS X v.10.2.8, select the name of your printer from the Name list and click Configure.
  • Page 67 Two pattern sheets are printed. It takes about seven minutes to complete printing. Do not open the Top Cover while printing. Print head alignment is automatically adjusted by printing the patterns. The printer is now ready to use. Printing Maintenance (1) Select Test Print from the pop-up menu.
  • Page 68 Clicking Check Setting prints the current settings and finishes the print head alignment. Two different patterns other than the ones shown above may be printed if you align the Print Head automatically for the first time after installing the printer driver. on page 76. User’s Guide on-screen manual and...

  • Page 69: Troubleshooting

    When an Error Occurs When an error occurs in printing such as the printer is out of paper or paper jams, a troubleshooting message is displayed automatically. Take the appropriate action described in the message.

  • Page 70: Cannot Install The Printer Driver Or An Application Program

    Installation procedure not followed correctly If the printer driver installation did not start automatically when you inserted the Setup CD-ROM into the CD-ROM drive: 1. Click Start and select My Computer. 2. Double-click the CD-ROM icon...

  • Page 71: Cannot Connect To Pc Properly

    Easy-PhotoPrint Pro, make sure that Adobe Photoshop is not running and install Adobe Photoshop Plug-In as described below. 1. Click Start, and select All Programs (or Programs), Canon Utilities, Easy- PhotoPrint Pro and then Photoshop Plug-In Installer.

  • Page 72: The Printer Is Vibrating

    This is not a malfunction, so wait until the POWER lamp stops flashing and stays lit, and the printer stops vibrating. Do not open the Top Cover while the printer is operating (the POWER lamp is flashing blue).
  • Page 73 Grayscale Printing setting in the printer driver. To do so, in Windows, clear the Grayscale Printing check box on the Main tab, then print. In Macintosh, select Quality & Media from the pop-up menu in the Print dialog box, and clear the Grayscale Printing check box, then print.
  • Page 74 See “Paper Feed Roller is dirty” in “Paper Does Not Feed Properly” If the inside of the printer is stained with excess ink, the printed paper may be smudged. Periodically clean the inside of the printer. See “Cleaning the Inside of the Printer” in the Select the Prevent paper abrasion check box to widen the clearance between the Print Head and the loaded paper.
  • Page 75 Problem Possible Cause Printed Surface is Media is curled Scratched/Back of Paper is Smudged Try This If the paper is curled, it may become marked or not feed properly. Use paper after correcting paper curl as follows. When using Photo Paper Plus Semi-gloss, even if the sheet is curled, load one sheet at a time as it is.

  • Page 76: Troubleshooting Printer Hardware

    When using Fine Art Paper “Museum Etching”, Fine Art Paper “Photo Rag”, Fine Art Paper Premium Matte, or non-Canon genuine specialty paper, be sure to select the type of each media from Media Type and a paper size which says “Art XX [Margin 35 mm]”...
  • Page 77 “Handling Error Messages” Restart your computer. It may solve the problem. Delete an undesired print job, if there is any. Use Canon IJ Status Monitor in Windows or click the printer’s icon in the Dock in Macintosh for the deletion.

  • Page 78: Paper Does Not Feed Properly

    If this happens, reduce the number of pages loaded to about the half the recommended maximum (stack approx. 5 mm or 0.2 inches high). If you are using art paper that is not produced by Canon, ensure that the paper is 200 gsm (53 lb) or less.

  • Page 79: Paper Jams

    See step (3) in “Load the paper.” • If you have turned off the printer in step 1, you will need to try printing again, because this operation cancels any print jobs in progress. When reloading the paper into the printer, refer to Feed Properly”...

  • Page 80: Handling Error Messages

    Troubleshooting Handling Error Messages When a printer error occurs, the ALARM lamp flashes orange in the way as shown below. The number of flashes (orange) indicates the type of error that has occurred. Count the flashes and take the appropriate action to correct the error.
  • Page 81 Before the ink absorber becomes completely full, contact the Customer Care Center. (You will need to replace a particular part of the printer.) Canon recommends that you call for service as soon as this error occurs. Once the ink absorber becomes completely full, printing cannot be performed until the ink absorber is replaced.
  • Page 82 (Macintosh) in the printer driver and load paper that is the same size as the setting and try printing again. If this error occurs even when the paper loaded in the printer is the same as the setting, set the printer driver not to detect the width of the paper.
  • Page 83 * Releasing the function for detecting the remaining ink level is memorised. Please be advised that Canon shall not be liable for any malfunction or trouble which may be caused by continuation of printing or refilling of ink.

  • Page 84: An Error Message Appears On The Screen

    3. Open the File menu and select Properties. 4. Click the Ports tab to confirm the port settings. Make sure that a port named USBnnn (Canon Pro9500 series) (where “n” is a number) is selected for Print to the following port(s).
  • Page 85 Click Cancel Printing, in the dialog box that is displayed. Then select Front Tray from Paper Source on the Main tab in the printer driver. Load the paper in the Front Tray and try printing again.
  • Page 86 Press the RESUME/CANCEL button on the printer to clear the error. Then check the Page Size setting in the Page Setup tab (Windows) or the Page Setup dialog box (Macintosh) in the printer driver and load paper that is the same size as the setting and try printing again.
  • Page 87 1. Select Print & Fax Preferences from the Printer pop-up menu. When using Mac OS X v.10.3.x or Mac OS X v.10.2.8, select Edit Printer List from the Printer pop-up menu. 2. Ensure that Pro9500 series is displayed and the check box is selected in the screen that is displayed.

  • Page 88: An Error Message Is Displayed On A Pictbridge Compliant Device

    No paper No paper in the Auto Sheet Feeder The printer has a built-in ink absorber to hold the ink used during print head cleaning, for example. This error message indicates that this ink absorber is nearly full. Press the RESUME/CANCEL button to clear the error so you can continue printing.
  • Page 89 If this message appears even when the paper loaded is the same size as the setting, set the printer driver not to detect the width of the paper. “Error Regarding the Width of Paper”...
  • Page 90 POWER lamp flashes blue and ALARM lamp flashes orange alternately) This section describes errors that are indicated on Canon-brand PictBridge- compatible cameras. The error messages and operations may vary depending on the camera you are using. For errors on non-Canon PictBridge-compatible cameras, check the status of ALARM lamp and take the appropriate action to clear the error.

  • Page 91: Appendix

    Appendix Specifications General Specifications Printing resolution (dpi): Print width: Acoustic noise level: Operating environment: Storage environment: Power supply: Power consumption: External dimensions: Weight: Print Head: 4800 (horizontal) x 2400 (vertical) Auto Sheet Feeder: 322.2 mm max. (12.7 inches) (for Borderless Printing: 329 mm / 12.9 inches) Front Tray: 348.8 mm max.
  • Page 92 Semi-gloss, Fine Art Paper “Photo Rag” 13" x 19" (Photo Paper Plus Glossy, Photo Paper Plus Semi- gloss, Fine Art Paper “Photo Rag”) If using a Canon PictBridge-compatible camera, you can select it. Default (Photo Paper Plus Glossy), Photo (Photo Paper Plus Glossy), Semi-gloss (Photo Paper Plus Semi-gloss), Fine (Fine Art Paper “Photo Rag”), Plain Paper (Letter)
  • Page 93 Minimum System Requirements Operating System Windows Vista™ Windows XP SP1, SP2 Windows 2000 Professional SP2, SP3, SP4 Operating System Mac OS X v.10.4 Mac OS X v.10.2.8 - v.10.3 *1 Conform to the operating system’s requirement when it is higher than this. For updated compatibility, visit our website.

  • Page 94: Safety Precautions

    Do not place the printer close to flammable solvents such as alcohol or thinners. Power supply Never attempt to plug in or unplug the printer from the power supply when your hands are wet. Always push the plug all the way into the power outlet.
  • Page 95 If any foreign object (metal or liquid) fall into the printer, unplug the power cord and call for service. Do not transport or store the printer on a slant, vertically or upside-down, as the ink may leak and damage the printer.

  • Page 96: Regulatory Information

    Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A., Inc. One Canon Plaza...

  • Page 97: Canon U.s.a., Inc. Limited Warranty

    Canon U.S.A., INC. LIMITED WARRANTY --- (USA Only) The limited warranty set forth below is given by Canon U.S.A., Inc. (“Canon USA”) with respect to the new or refurbished Canon- brand product (“Product”) packaged with this limited warranty, when purchased and used in the United States only.
  • Page 98 InstantExchange Service ** A Canon Customer Care Center or ASF technician will attempt to diagnose the nature of the problem and, if possible, correct it over the telephone. If the problem cannot be corrected over the telephone, and you elect the InstantExchange option, a reference number will be issued to you.

  • Page 99: Index

    Cannot Install the Printer Driver ... 66 Canon IJ Printer Utility dialog box (Macintosh) ... 49 Canon IJ Status Monitor (Windows) ... 73 Canon U.S.A., INC. LIMITED WARRANTY --- (USA Only) .. 93 Cleaning ... 53, 54 Deep Cleaning ... 56, 58 Driver settings (Macintosh) ...
  • Page 100 Print Media to Avoid ... 4 Print Quality ... 69 Print Results Not Satisfactory or Contains Errors ... 68 Printer Driver Setting for Media Type ... 15 Printer Properties dialog box ... 18, 31, 47 Printing Photographs Directly from a PictBridge Compliant Device ...
  • Page 101 This product uses the following copyrighted software: exit.c Copyright © 1990 The Regents of the University of California. All rights reserved. Redistribution and use in source and binary forms are permitted provided that the above copyright notice and this paragraph are duplicated in all such forms and that any documentation, advertising materials, and other materials related to such distribution and use acknowledge that the software was developed by the University of California, Berkeley.

  • Page 103: Ordering Information

    © 2007 Canon U.S.A., Inc. Canon is a registered trademark of Canon Inc. in the United States and may be a registered trademark or trademarks in other countries. All other product and brand names are trademarks of their respective owners. As an ®...
  • Page 104 The following ink tanks are compatible with this printer. For details on ink tank replacement, refer to “Replacing an Ink Tank” in this guide. XXXXXXXX ©CANON INC.2007 PRINTED IN JAPAN QT5-0145-V02...

This manual is also suitable for:

0373b001aa - pixma pro9500 professional large format inkjet printerPro9500 - pixma mark ii color inkjet printer

Table of Contents