AN07-00200-03E
3.1
bits pot yellow single-unit operation
Explanations of the operation and control parts as shown in "Figure 3-1 Single-unit
operation/Controls and mechanicals" are described in "Table 3-1 Single-unit operation/Descriptions
of the controls and mechanicals".
The LEDs (red) and buzzer are controlled by SW 2, SW 3, volume switch, and temperature sensor
on the starter kit.
8. LEDs (red)
7. Buzzer
1. Mode SW
2. Reset SW
6. Volume SW
5. Temperature sensor
3. SW2
4. SW3
Figure 3-1 Single-unit operation/Controls and mechanicals
61