Page 1 CDI-E364-010 © 2007 CANON INC. ENGLISH Camera User Guide Ensure that you read the Safety Precautions (p. 172-p. 181). PRINTED IN CHINA Getting Started Learning More Components Guide Basic Operations Commonly Used Shooting Functions Shooting Using the Mode Dial Various Shooting Methods...
Page 2: Check The Package Contents
Getting Started (p. 7) Learning More (p. 37) : Contents of This Guide Camera User Guide Direct Print User Guide Software Starter Guide ZoomBrowser EX/ ImageBrowser Software User Guide • PDF manuals available on the Canon website. http://web.canon.jp/ Imaging/information- e.html...
Page 3: Checking The Package Contents
• Camera User Guide • Direct Print User Guide • Software Starter Guide • “Canon Customer Support” Leaflet You may not be able to achieve the full performance of this camera with the included memory card. You can use SD* memory cards, SDHC (SD High Capacity) memory cards, MultiMediaCards, MMCplus cards and HC MMCplus cards in this camera.
Page 4: Table Of Contents
Table of Contents Table of Contents Items marked with a functions or procedures. Please Read Getting Started ......7 Preparations .
Page 5: Table Of Contents
Using the Self-Timer ......64 Changing the Recording Pixels (Still Images) ..66 Changing the Compression (Still Images) .
Page 6 Table of Contents Adjusting Exposure for Built-in Flash Shooting (Safety FE) . . 120 Registering Settings to the Print/Share Button. . . 121 Setting the Display Overlays ..... 122 Saving Custom Settings .
Page 7: Table Of Contents
Preventing Malfunctions ......177 Battery Handling ......178 Handling the Memory Card .
Page 8: Please Read
Please note that Canon Inc., its subsidiaries and affiliates, and its distributors are not liable for any consequential damages arising from any malfunction of a camera or accessory, including memory cards, that results in the failure of an image to be recorded or to be recorded in a way that is machine readable.
Page 9: Getting Started
Getting Started Preparations Shooting Still Images Viewing Still Images Shooting Movies Viewing Movies Erasing Printing Downloading Images to a Computer System Map...
Page 10: Preparations
Preparations Preparations Installing the Batteries Slide the battery cover lock (a) and hold it open while sliding the cover (b) and opening it (c). Battery Cover Lock Install four batteries. Negative end (–) Positive end (+)
Page 11: Removing The Batteries
Close the cover (a), and press downward as you slide it until it clicks into place (b). Removing the Batteries Remove the batteries by opening the Memory Card Slot / Battery Cover and tilting the camera at an angle. Attaching the Wrist Strap In order to avoid dropping the camera, we recommend attaching the wrist strap before using the camera.
Page 12: Inserting The Memory Card
Preparations Inserting the Memory Card Slide the battery cover lock (a) and hold it open while sliding the cover (b) and opening it (c). Battery Cover Lock Insert the memory card until it clicks into place. Back Write Protect Tab (Only SD memory cards) •...
Page 13: To Remove The Memory Card
Close the cover (a), and press downward as you slide it until it clicks into place (b). Ensure that the memory card is correctly oriented before inserting it in the camera. Inserting it backward may cause the camera to fail to recognize the memory card or to malfunction. To Remove the Memory Card Push the memory card with your finger until the memory card clicks and then release it.
Page 14: Opening The Lcd Monitor
Preparations Opening the LCD Monitor The LCD monitor can be used to check an image during shooting, to play back recorded images or to adjust menu settings. It can be opened to the following range of positions. Opened right to left 180 degrees.
Page 15: Setting The Date And Time
Setting the Date and Time The Date/Time settings menu will appear the first time the power is turned on. Set the date and time as shown in Step 3 and 4. Buttons Press the power button. Select [Date/Time]. 1. Press the button.
Page 16: Setting The Display Language
Preparations You can imprint the date and time you have set onto images (p. 69). A rechargeable lithium battery is built into the camera to save such settings as the date/time. Install the batteries into the camera at time of purchase, or recharge batteries for about 4 hours using the separately-sold AC Adapter Kit ACK600.
Page 17: Shooting Still Images ( Mode)
Shooting Still Images Mode Dial Press the power button. • The start-up sound will play and the start-up image will display in the LCD monitor. • Pressing the power button again turns the power off. Select a shooting mode. 1. Set the mode switch to (Shooting).
Page 18 Shooting Still Images Press the shutter button lightly (press halfway) to set the focus. • When the camera focuses, it beeps twice and the indicator lights green (orange when the flash fires). • An AF frame will display in green on the LCD monitor at the point of focus.
Page 19 Reviewing an Image Right After Shooting (Rec. Review) Recorded images are displayed on the LCD monitor for approximately 2 seconds immediately after shooting. You can also use the following methods to continue displaying the image immediately after shooting so that you can check it. Keep the shutter button pressed fully.
Page 20: Viewing Still Images
Viewing Still Images Viewing Still Images Buttons Set the mode switch to The last recorded image will display. Use the view. • Use the button to move to the previous image and the move to the next image. • The images advance more quickly if you keep the button pressed continuously, but they will appear coarse.
Page 21: Shooting Movies ( Standard Mode)
Shooting Movies Mode Dial Press the power button. Select a shooting mode. 1. Set the mode switch to (Shooting). 2. Set the mode dial to 3. Confirm that the camera is set to (Standard). Aim the camera at the subject. Do not touch the microphone while recording.
Page 22: To Stop Recording
Shooting Movies Press the shutter button lightly (press halfway) to set the focus. • An electronic beep will sound twice and the indicator will light green when the camera focuses. • The exposure, focus and white balance are automatically set when you press the button halfway.
Page 23: Viewing Movies
Viewing Movies Buttons Set the mode switch to Use the button. • Images with a are movies. Use the button. • The movie will start playing. • If you press the FUNC./SET button during playback, you can pause and restart the movie. •...
Page 24: Erasing
Erasing Erasing Buttons Set the mode switch to Use the press the button. Select [Erase] and press the • To exit instead of erasing, select [Cancel]. Please note that erased images cannot be recovered. Exercise adequate caution before erasing an image. Button (Playback).
Page 25: Printing
• See the printer’s user guide for connection instructions. *1 Since this camera uses a standard protocol (PictBridge), you can use it with other PictBridge-compliant printers in addition to Canon-brand printers. *2 You can also use the CP-10/CP-100/CP-200/CP-300 card photo printers.
Page 26 Printing Turn on the printer. Set the camera’s mode switch to press the power button. • The button will light blue. • A the LCD monitor if the connection is correct (the displayed icons differ according to the connected printer). •...
Page 27: Downloading Images To A Computer
Downloading Images to a Computer Items to Prepare • Camera and computer • Canon Digital Camera Solution Disk supplied with the camera • Interface cable supplied with the camera (be sure to use only the supplied cable) System Requirements Please install the software on a computer meeting the following minimum requirements.
Page 28: Installing The Software
Ensure that you install the software first before connecting the camera to the computer. Installing the software. Windows 1. Place the Canon Digital Camera Solution Disk in the computer's CD-ROM drive. 2. Click [Easy Installation]. Follow the onscreen messages to proceed with the installation.
Page 29: Connecting The Camera To A Computer
Connecting the camera to a computer. 1. Connect the supplied interface cable to the computer's USB port and to the camera's DIGITAL terminal. • Slip a fingernail under the left edge of the terminal cover to open it and insert the interface cable all the way into the connector.
Page 30 [OK]. If the window to the right does not appear, click the [Start] menu and select [All Programs] or [Programs], followed by [Canon Utilities], [CameraWindow], [CameraWindow] and [CameraWindow]. CameraWindow will display. Preparations for downloading images are now finished. Please proceed to the Downloading Images Using the Camera (Direct Transfer) section (p.
Page 31: Direct Transfer
Macintosh The following window will appear when you establish a connection between the camera and computer. If it fails to appear, click the [CameraWindow] icon on the Dock (the bar which appears at the bottom of the desktop). Preparations for downloading images are now finished. Please proceed to the Downloading Images Using the Camera (Direct Transfer) section (p.
Page 32 Downloading Images to a Computer All Images New Images DPOF Trans. Images Select & Transfer Wallpaper Confirm that the Direct Transfer menu is displayed on the camera's LCD monitor. • The button will light blue. • Press the MENU button if the Direct Transfer menu fails to appear.
Page 33 Select & Transfer/Wallpaper Use the ) button. Use the and press the • The images will download. The button will blink blue while downloading is in progress. • Pressing the FUNC./SET button will cancel a download in progress. Press the button after downloading finishes.
Page 34: System Map
• NiMH Battery NB4-300 (set of 4 Weight WW-DC1 AA-size) also available separately AV Cable AVC-DC300* AA Alkaline Batteries (x4) CBK4-300* Interface Cable IFC-400PCU* Memory Card (32MB) Canon Digital Camera Solution Disk AC Adapter Kit ACK600 Compact Power Adapter CA-PS500 Power Cord...
Page 35 High-Power Flash HF-DC1 Conversion Lens Adapter LA-DC58J Direct Interface Cable PCMCIA Adapter SD Memory Card* • SDC-128M • SDC-512MSH *1 Also available for purchase separately. *2 See the user guide supplied with the printer for more information on the printer. *3 This camera can also be connected to the CP-10/CP-100/CP-200/CP-300.
Page 36: Optional Accessories
System Map Optional Accessories The following camera accessories are sold separately. Some accessories are not sold in some regions, or may no longer be available. Lenses, Lens Adapter • Conversion Lens Adapter LA-DC58J This adapter is required for mounting the wide converter and tele- converter to the camera.
Page 37: Other Accessories
• SD Memory Card SD memory cards and SDHC memory cards are used to store images recorded by the camera. Canon brand memory cards are available in 128 MB and 512 MB capacities. • Interface Cable IFC-400PCU Use this cable to connect the camera to a computer, Compact Photo Printer (SELPHY series), or to a Bubble Jet printer (refer to your Bubble Jet printer user guide).
Page 39: Learning More
Learning More...
Page 40: Components Guide
Components Guide Components Guide Front View Speaker AF-assist Beam (p. 45) Red-Eye Reduction Lamp (p. 89) Self-Timer Lamp (p. 64) Viewfinder Window (p. 39) Flash (p. 62) Ring (p. 186) Ring Release Button (p. 186) Lens Microphone (p. 147)
Page 41: Back View
Back View LCD Monitor (p. 49) Viewfinder A/V OUT (Audio/Video Output) Terminal (p. 157) Wrist Strap Mount (p. 9) DIGITAL Terminal (pp. 23, 27) Terminal Cover DC IN (Power Input) Terminal (p. 184) Memory Card Slot / Battery Cover (p. 8) Memory Card Slot / Battery Cover Lock (p.
Page 42 Components Guide Controls (Print/Share) Button (p. 121) Indicators (p. 41) Power Button (p. 13) Power Lamp Shutter Button (p. 16) Zoom Lever (pp. 57, 130) Shooting: (Wide Angle)/ Playback: (Index)/ Mode Dial (p. 72) Mode Switch (pp. 15, 18, 21) (Jump) Button (pp.
Page 43: Indicators
Indicators The indicators on the back of the camera will light or blink under the following conditions. • Upper Indicator Green: Ready to shoot (camera beeps twice) Blinking Green: Image recording/reading/erasing/transferring (when connected to a computer/printer) Orange: Ready to shoot (flash on) Blinking Orange: Ready to shoot (camera shake warning), charging flash •...
Page 44: Basic Operations
Basic Operations Basic Operations Menus and Settings Settings for the shooting or playback modes, or camera settings such as the print, date/time, and sound settings are set using the FUNC./ SET button or the MENU button. Button (Func. Menu) This menu sets many of the common shooting functions. •...
Page 45 Button (Rec., Play, Print and Set up Menus) Convenient settings for shooting, playback or printing can be set with these menus. (Rec.) Menu You can switch between menus with button. • This example shows the Rec. menu in Press the Use the •...
Page 46: Menus And Default Settings
Basic Operations Menus and Default Settings See Functions Available in Each Shooting Mode FUNC. Menu The icons shown here indicate the default settings (factory settings). Menu Item White Balance Drive Mode My Colors +/- (Flash) / Flash Output Rec. Menu Menu Item AF Frame Face Detect*/AiAF/Center...
Page 47 Menu Item Safety FE On*/Off Spot AE Point Center*/AF Point Safety Shift On/Off* Auto ISO Shift Off*/ MF-Point Zoom On*/Off Safety MF On*/Off AF-assist Beam On*/Off Review Off/2*–10 seconds/Hold Review Info Off*/Detailed/Focus Check Reverse Disp. On*/Off Disp. Overlay (Still image) Off*/Grid Lines/3:2 Guide/Both (Movie) Off*/Grid Lines...
Page 48: Play Menu
Basic Operations Play Menu Menu Item Auto Play Red-Eye Correction p. 140 Resize Sound Memo Protect Rotate Erase all Transfer Order Transition Set up Menu Menu Item Mute On/Off* Volume Off/1/2*/3/4/5 Start-up Vol. Operation Vol. Selftimer Vol. Shutter Volume Print Menu Reference Menu Item Page...
Page 49 Menu Item Options Playback Vol. Start-up Image On*/Off Power Saving Auto Power On*/Off Down Display Off 10 sec./20 sec./30 sec./1 min.*/2 min./3 min. Date/Time Format File Numbering Continuous*/ Auto Reset Create Folder Create New Check mark Folder (On)/ No check mark (Off) Auto Create Off*/Daily/...
Page 50 Canon compact photo printer SELPHY CP750/CP740/CP730/CP720/CP710/ CP510. As this setting will be stored to memory even when the power is turned off, to print using an image size other than (however, the connection method cannot be changed while connected to a printer).
Page 51: Using The Lcd Monitor
Using the LCD Monitor Press the • The display mode changes as follows with each press. Shooting Mode ( Standard (No Information) Detailed (Information View) • The shooting information displays for approximately 6 sec. when a setting is changed, regardless of the selected display mode. The LCD monitor on or off setting is retained even after the camera power is turned off.
Page 52: Information Displayed On The Lcd Monitor
Basic Operations Information Displayed on the LCD Monitor Shooting Information (Shooting Mode) Grid Lines ISO Speed White Balance Drive Mode My Colors Flash Exposure Compensation/Flash Output Metering Mode Compression (Still image) Recording Pixels (Still image) Recording Pixels (Movies) Digital Tele-Converter/Zoom Magnification Flash Auto Rotate...
Page 53 Image Stabilizer Create Folder Stills: Recordable Shots Movies: Remaining Time/Elapsed Time Camera Shake Warning AE Lock/FE Lock Shutter Speed* Aperture Value* Exposure Compensation Macro AF Lock/Manual Focus * Displays when the shutter button is pressed halfway. Since the camera automatically readjusts for the optimal settings when using the flash, settings displayed in shooting information may differ from the actual settings.
Page 54 Basic Operations Playback Information (Playback Mode) Standard Displayed Image Number/Total Number of Images Folder Number-File Number Compression (Still Images) Recording Pixels (Still Images) Movie WAVE Format Sound Red-Eye Corrected/Resized Protection Status Shooting Date/Time Detailed Histogram (p. 54) Shooting Mode Metering Mode ISO Speed –...
Page 55 Shutter Speed Aperture Value Recording Pixels/Frame Rate (Movies) Exposure Compensation Flash Exposure Compensation/Flash Output White Balance My Colors Red-Eye Correction Function AF Lock/Manual Focus Macro File Size Still Image: Recording Pixels Movies: Movie Length Focus Check Display Displayed Image Number/Total Number of Images Compression (Still Images) Recording Pixels (Still Images) The Focus Check display cannot be selected for movies.
Page 56: Histogram Function
Basic Operations The following information may also be displayed with some images. A sound file in a format other than the WAVE format is attached or the file format is not recognized. JPEG image not conforming to Design rule for Camera File System Standards (p.
Page 57: Resetting Settings To Their Default Values
Resetting Settings to Their Default Values Select [Reset All]. 1. Press the 2. Use the menu. 3. Use the [Reset All]. 4. Press the Accept the setting. 1. Use the [OK] 2. Press the When the camera is in shooting mode and the mode dial is set to , only the settings saved for default settings.
Page 58: Formatting Memory Cards
Basic Operations Formatting Memory Cards You should always format a new memory card or one from which you wish to erase all images and other data. Please note that formatting (initializing) a memory card erases all data, including protected images and other file types. Select [Format].
Page 59: Commonly Used Shooting Functions
Commonly Used Shooting Functions Shooting with the Optical Zoom Shooting Mode The zoom can be adjusted from 35 mm – 210 mm (focal length) in 35mm film equivalent terms. The zoom bar will display while you adjust the zoom. Press the zoom lever toward •...
Page 60: Using The Digital Zoom/Digital Tele-Converter
Commonly Used Shooting Functions Using the Digital Zoom/Digital Tele-Converter Shooting Mode You can combine digital zoom with optical zoom when shooting. The available shooting characteristics and focal lengths (35mm film equivalent) are as follows: Selection Focal Length Standard 35 – 840 mm 35 –...
Page 61 Accept the setting. 1. Use the [Standard]. 2. Press the Press the zoom lever toward • The combined digital and optical zoom setting will display in the LCD monitor. • Press the zoom lever toward zoom out. • The image may appear coarse depending upon the selected recording pixels (the zoom factor appear in blue).
Page 62 Commonly Used Shooting Functions Safety Zoom Zone Depending on the number of recording pixels set, you can zoom without pausing up to a factor where the image quality does not deteriorate (Safety Zoom). icon displays when reaching the maximum zoom factor without image deterioration.
Page 63 Shooting with the Digital Tele-Converter Select [Digital Zoom]. 1. Press the 2. In the menu, use the button to select [Digital Zoom]. Accept the setting. 1. Use the [1.5x] or [2.0x]. 2. Press the Adjust the angle of view with the zoom lever and shoot.
Page 64: Using The Flash
Commonly Used Shooting Functions Using the Flash Shooting Mode Press the button. 1. Use the the flash mode. • : [Off] • : [On] • : [Auto] You are recommended to shoot with the camera attached to a tripod or other device if the camera shake warning icon appears.
Page 65: Shooting Close-Ups (Macro)
Shooting Close-ups (Macro) Shooting Mode Use this mode to shoot close-ups of flowers or small items. At maximum wide angle, the image area is 28 x 20 mm (1.1 x 0.79 in.) when at the minimum focusing distance (1 cm (0.4 in.) from the end of the lens to the subject).
Page 66: Using The Self-Timer
Commonly Used Shooting Functions Using the Self-Timer Shooting Mode You can set the time delay and the numbers of shots you wish to take in advance. 10 sec. Self-Timer: shoots 10 seconds after you press the shutter button. • 2 seconds before the shutter releases, the self-timer lamp and sound speed up.
Page 67: Changing The Delay Time And Number Of Shots
Changing the Delay Time and Number of Shots Select 1. Press the 2. Use the and choose button. 3. Press the Accept the setting. 1. Use the [Delay] or [Shots] and change the settings with the 2. Press the 3. Press the If the [Shots] option is set to 2 or more shots, the following occurs.
Page 68: Changing The Recording Pixels (Still Images)
Commonly Used Shooting Functions Changing the Recording Pixels (Still Images) Shooting Mode Select a recording pixels setting. 1. Press the 2. Use the and the the option. 3. Press the Approximate Values for Recording Pixels Recording Pixels 12M 4000 x 3000 (Large) (Medium 1) (Medium 2)
Page 69: Changing The Compression (Still Images)
Changing the Compression (Still Images) Shooting Mode Select a compression setting. 1. Press the 2. Use the and the the option. 3. Press the Approximate Values for Compression Settings Compression High Quality Superfine Fine Normal Normal See Image Data Sizes (Estimated) (p. 198). See Memory Cards and Estimated Capacities (p.
Page 70: Configuring The Postcard Mode
Commonly Used Shooting Functions Configuring the Postcard Mode Shooting Mode You can shoot images with the optimal settings for postcards by composing them inside the print area (width-to-height ratio of approximately 3:2) shown in the LCD monitor. Select 1. Press the 2.
Page 71: Embedding The Date In The Image Data
Embedding the Date in the Image Data Shooting Mode You can embed the date in the image data when selected. Select 1. Press the 2. Use the and choose button. 3. Press the Select [Date Stamp]. 1. Press the 2. In the menu, use the button to select [Date Stamp].
Page 72: Setting The Image Stabilizer Function
Commonly Used Shooting Functions Ensure that the camera’s date/time is set beforehand (p. 13). The date stamp cannot be deleted from the image data once it has been embedded. To imprint the date on all but software (ZoomBrowser EX or ImageBrowser) or printer settings.
Page 73: Lcd Monitor Icons
Select [IS Mode]. 1. Press the 2. In the menu, use the button to select [IS Mode]. Accept the setting. 1. Use the [Continuous], [Shoot Only], [Panning] or [Off]. 2. Press the LCD Monitor Icons [Continuous] [Shoot Only] [Panning] Camera shake may not be fully corrected when shooting with slow shutter speeds, such as with evening shots.
Page 74: Shooting Using The Mode Dial
Shooting Using the Mode Dial Shooting Using the Mode Dial Mode Dial Auto (p. 15) The camera automatically selects settings. Image Zone (pp. 73-81) When a shooting mode appropriate for the shooting conditions is selected, the camera automatically adjusts settings for optimal shooting.
Page 75: Shooting Modes For Specific Scenes
Creative Zone (pp. 82-87, 123) With these settings, you select parameters such as the shutter speed or aperture value to achieve a range of effects. : Program AE : Setting the Shutter Speed : Setting the Aperture : Manually Setting the Shutter Speed and Aperture : Register regularly used shooting modes and settings.
Page 76: Select A Shooting Mode
Shooting Using the Mode Dial Allows you to take snapshots of people against twilight or night backgrounds by reducing the effects of camera shake even without using a tripod. Allows you to capture subjects that move around, such as children and pets, without missing photo opportunities.
Page 77 Shooting Using the Mode Dial Indoor Prevents camera shake and maintains the subject’s true color when shooting under fluorescent or tungsten lighting. Foliage Shoots trees and leaves—such as new growth, autumn leaves or blossoms—in vivid colors. Snow Shoots without a blue tinge and without making people appear dark against a snowy background.
Page 78 Shooting Using the Mode Dial Appropriate for shooting images with Waterproof Case WP-DC18 (sold separately). This mode uses an optimal white balance setting to reduce bluish tones and record images with a natural hue. The ISO speed is set to 3200. Use it to set ISO speeds for high sensitivity imaging (twice that of ISO 1600).
Page 79: Movie Shooting
Movie Shooting Shooting Mode The following movie modes are available. The recording time will vary according to the capacity of the memory card you use (p. 198). Standard You can select the recording pixels and record until the memory card is full (when a super high-speed memory card is used, such as the recommended SDC-512MSH).
Page 80 Shooting Using the Mode Dial Shoot. • Pressing the shutter button halfway automatically sets the exposure, focus and white balance settings. • Pressing the shutter button fully starts recording video and sound simultaneously. • During shooting, the recording time and [ Rec] appear on the LCD monitor.
Page 81 Changing Recording Pixels You can change the recording pixels when the movie mode is set to (Standard) (frame rate is fixed). Select the number of recording pixels. 1. Press the 2. Use the and the change the option. 3. Press the Recording Pixels and Frame Rates Frame rates indicate the number of frames recorded or played back each second.
Page 82: Shooting Panoramic Images (Stitch Assist)
Shooting Using the Mode Dial Shooting Panoramic Images (Stitch Assist) Shooting Mode Stitch Assist can be used to shoot overlapping images that can later be merged (stitched) to create one panoramic image on a computer. The overlapping seams of several adjacent images can be joined into a single panoramic image.
Page 83 Shoot the first image in the sequence. • The exposure and white balance are set and locked with the first image. Compose the second image so that it overlaps a portion of the first and shoot. • You can press the recorded image to retake the shot.
Page 84: Program Ae
Shooting Using the Mode Dial Program AE Shooting Mode The camera automatically sets the shutter speed and aperture value to match the brightness of the subject. You can freely configure such settings as the ISO speed, exposure compensation and white balance. Set the mode dial to Shoot.
Page 85: Setting The Shutter Speed
Setting the Shutter Speed Shooting Mode When you set the shutter speed, the camera automatically selects an aperture value to match the brightness of the subject. Faster shutter speeds allow you to catch an instantaneous image of a moving subject, while slower speeds create a flowing effect and allow you to shoot without a flash in dark areas.
Page 86 Shooting Using the Mode Dial The aperture value and shutter speed change according to the zoom state as follows Maximum Wide Angle Maximum Telephoto The fastest shutter speed for flash synchronization is 1/500 second. Therefore, even if the shutter speed is preset to a speed higher than 1/500 second, the camera automatically resets the shutter speed to 1/500 second during shooting.
Page 87: Setting The Aperture
Setting the Aperture Shooting Mode The aperture adjusts the amount of light entering through the lens. When you set the aperture value, the camera automatically selects a shutter speed to match the brightness. Selecting a lower aperture value (opening the aperture) allows you to blur the background and create a beautiful portrait.
Page 88: Safety Shift
Shooting Using the Mode Dial The maximum shutter speed with synchronized flash is 1/500 second. Therefore, even if an aperture value is preset, the aperture value may automatically be reset to match the synchronized flash speed. Aperture Value Display The larger the aperture value, the smaller the lens aperture. F2.8 F3.2 F3.5 F4.0 F4.5 F4.8 F5.0 F5.6 F6.3 F7.1 F8.0 Safety Shift With...
Page 89: Manually Setting The Shutter Speed And Aperture
Manually Setting the Shutter Speed and Aperture Shooting Mode You can manually set the shutter speed and aperture to shoot images. Set the mode dial to Configure the shutter speed and aperture set- ting. 1. Use the button to select shutter speed or aperture. 2.
Page 90: Various Shooting Methods
(p. 56) is conducted immediately before shooting. • This reflects standard shooting criteria established by Canon. Actual results may vary according to the subject and shooting conditions. • Even if continuous shooting suddenly stops, the memory card may not be full.
Page 91: Setting The Red-Eye Reduction Function
The interval between shots lengthens when the built-in memory of the camera fills. If the flash is used, the interval between shots lengthens because the flash must charge. Setting the Red-Eye Reduction Function Shooting Mode This function reduces the red-eye effect which results when the eyes reflect light back from the flash Select [Red-Eye].
Page 92: Setting The Slow Synchro Function
Various Shooting Methods Setting the Slow Synchro Function Shooting Mode You can shoot with the flash at slow shutter speeds. When shooting at night or under artificial indoor lighting, this function reduces the effect of background darkening when the flash fires. Select [Slow Synchro].
Page 93: Checking The Focus And Peoples' Expressions (Focus Check)
Checking the Focus and Peoples' Expressions (Focus Check) Shooting Mode Allows you to check the focus of an image taken. Face Detect displays a frame adjusted to the size of a face in an image, allowing you to easily check facial expressions or whether a subject's eyes are closed.
Page 94 Various Shooting Methods Shoot. • The image is displayed. • Frames are displayed as follows. Frame color Displays the range of Orange the image displayed at bottom right. The frame is displayed at a position at which White the image is in focus (AF Frame).
Page 95: Selecting An Af Frame Mode
Selecting an AF Frame Mode Shooting Mode The AF frame indicates the area of the composition on which the camera focuses. You can set the AF frame in the following ways. Face Detect AiAF Center FlexiZone Select [AF Frame]. 1. Press the 2.
Page 96 Various Shooting Methods Accept the setting. 1. Use the [Face Detect], [AiAF], [Center] or [FlexiZone]. 2. Press the • Changing the AF Frame Size (p. 95) • Changing the AF Frame Position (p. 96) [Face Detect] and [FlexiZone] cannot be used when the LCD monitor is turned off.
Page 97 Changing the AF Frame Size ([Center] or [Flexi- Zone]) You can change the AF frame size to match the size of a subject. You reduce the area used to set the focus when you reduce the AF frame to match a small subject or to focus on a particular portion of a subject.
Page 98 Various Shooting Methods Changing the AF Frame Position ([FlexiZone]) You can move the AF frame to any position. This allows you to set the focus more precisely on your target subject. Press repeatedly until the AF frame turns green. • In some shooting modes, pressing the between the following settings categories.
Page 99: Shooting Hard-To-Focus Subjects (Focus Lock, Af Lock, Manual Focus)
Shooting Hard-to-Focus Subjects (Focus Lock, AF Lock, Manual Focus, Safety MF) Shooting Mode It may be difficult to focus on the following types of subjects. • Subjects with extremely low contrast to the surroundings • Scenes with a mixture of near and far subjects •...
Page 100: Shooting With The Af Lock
Various Shooting Methods Shooting with the AF Lock Turn on the LCD monitor. Aim the camera so that an object at the same focal distance as the main subject is centered in the AF frame. Press and hold the shutter button halfway and press the •...
Page 101: Shooting In Manual Focus Mode
Shooting in Manual Focus Mode The focus can be manually set. Turn on the LCD monitor. Press the • The icon and the MF indicator are displayed. • When the Zoom] is set to [On], the portion of the image in the AF frame will appear magnified*.
Page 102 Various Shooting Methods To Cancel the Manual Focus Press the button and use the You cannot change the position of the AF frame in Using the Manual Focus in Combination with the Auto Focus (Safety MF) First, manual focus is used to roughly focus, then from that focus position the camera automatically focuses more accurately.
Page 103: Locking The Exposure Setting (Ae Lock)
Locking the Exposure Setting (AE Lock) Shooting Mode You can set the exposure and focus separately. This is effective when the contrast is too strong between the subject and background or when a subject is backlit. Press the button and select Aim the camera at the subject on which you wish to lock the exposure.
Page 104: The Button
Various Shooting Methods Changing the Shutter Speed and Aperture Value Combination The automatically selected combinations of shutter speeds and aperture values can be freely changed without altering the exposure to shoot images (Program Shift). Aim the camera at the subject on which you wish to lock the exposure.
Page 105: Locking The Flash Exposure Setting (Fe Lock)
Locking the Flash Exposure Setting (FE Lock) Shooting Mode You can lock the flash exposure so that the exposure settings are correctly set regardless of the composition of your subject. Press the button and select Aim the camera at the subject on which you wish to lock the exposure.
Page 106: Adjusting The Iso Speed
Various Shooting Methods Adjusting the ISO Speed Shooting Mode Raise the ISO speed to use a fast shutter speed when you wish to reduce the effects of camera shake or avoid blurry subjects, or to turn the flash off when shooting in a dark area. Auto High ISO Auto...
Page 107 Adjust the ISO Speed. 1. Press the 2. Use the the setting. 3. Press the • Selecting puts priority on image quality in setting the optimal ISO speed for the light level when shooting. As the imaging sensitivity will automatically be raised in dark places, shutter speed will increase, reducing camera shake and subject blurring.
Page 108: Reducing Camera Shake When Shooting (Auto Iso Shift)
Various Shooting Methods Reducing Camera Shake When Shooting (Auto ISO Shift) Shooting Mode When the camera shake warning icon ( this function allows you to increase ISO sensitivity and to shoot at a shutter speed which minimizes the effects of camera shake. button Does not function when the flash fires in Depending on shooting conditions, the camera shake...
Page 109 Button Press the shutter button halfway. • When is displayed, the button lights in blue. Press the shutter but- ton halfway. • The ISO speed after adjustment is displayed. • While pressing the shutter button halfway, pressing the again will return the ISO speed to its original condition.
Page 110: Adjusting The Exposure Compensation
Various Shooting Methods Adjusting the Exposure Compensation Shooting Mode Adjust the exposure compensation to a positive value to avoid making the subject too dark when it is backlit or shot against a bright background. Adjust the exposure compensation to a negative value to avoid making the subject too bright in night shots or when shot against a dark background.
Page 111: Switching Between Metering Modes
Switching between Metering Modes Shooting Mode The following metering modes are available. Evaluative Center Weighted Avg. Spot Center AF Point Change the metering method. 1. Press the 2. Use the and the the option. 3. Press the See Functions Available in Each Shooting Mode (p. 214). Appropriate for standard shooting conditions, including backlit scenes.
Page 112 Various Shooting Methods Lock the Spot AE Point to the Center/Couple the Spot AE Point to the AF Frame Select [Spot AE Point]. 1. Press the 2. In the menu, use the button to select [Spot AE Point]. Accept the setting. 1.
Page 113: Adjusting The Tone (White Balance)
Adjusting the Tone (White Balance) Shooting Mode Normally, the (auto white balance) setting selects an optimal white balance. When the change the white balance using a setting appropriate for the light source. Auto Settings are automatically set by the camera. Day Light For recording outdoors on a bright day.
Page 114: Using The Custom White Balance
Various Shooting Methods Using the Custom White Balance Take a custom white balance that are difficult for the correctly. • Shooting close-ups (Macro) • Shooting subjects of monotone color (such as sky, sea or forest) • Shooting with a particular source of light (such as a mercury-vapor lamp) Select 1.
Page 115 You are recommended to set the shooting mode to and the exposure compensation setting to [±0] before setting a custom white balance. The correct white balance may not be obtained when the exposure setting is incorrect (image appears completely black or white). Shoot with the same settings as when reading the white balance data.
Page 116: Shooting In A My Colors Mode
Various Shooting Methods Shooting in a My Colors Mode Shooting Mode You can change the look of an image when it is shot. My Colors Off Vivid Neutral Sepia Custom Color Configuring My Colors Settings ( Select a My Colors setting. 1.
Page 117: Setting The Camera To A Custom Color Mode
Setting the Camera to a Custom Color Mode ( Select 1. Press the 2. Use the and choose button. Select the mode. 1. Press the 2. Use the [Contrast], [Sharpness] or [Saturation]. 3. Use the setting. • The adjustment results show in the LCD monitor. •...
Page 118: Switching Between Flash Adjustment Settings
Various Shooting Methods Switching between Flash Adjustment Settings Shooting Mode Although the built-in flash will fire with automatic flash adjustments, it is also possible to set it so that it fires without any adjustments. Select [Flash Adjust]. 1. Press the 2.
Page 119: Adjusting Flash Compensation Settings
Adjusting Flash Compensation Settings Shooting Mode Flash exposure compensation can be adjusted in the range of -2 to +2 stops in 1/3-stop increments. You can combine the flash exposure compensation with the camera’s exposure compensation function for balanced exposure of the background when shooting with a flash. In shooting modes, please set [Flash Adjust] to [Auto].
Page 120: Setting The Flash Output
Various Shooting Methods Setting the Flash Output Shooting Mode When shooting, the flash output can be controlled in three steps, up to FULL. In [Manual]. Configure the flash output setting. 1. Press the 2. Use the and the the option. 3.
Page 121: Switching The Timing At Which The Flash Fires
Switching the Timing at which the Flash Fires Shooting Mode The flash fires right after the shutter opens, regardless of the 1st-curtain shutter speed. Usually, the 1st-curtain is used when shooting. The flash fires right before the shutter closes. Compared with the 1st-curtain, the flash fires later and allows you to 2nd-curtain shoot images in which, for example, a car’s taillights seem to...
Page 122: Adjusting Exposure For Built-In Flash Shooting (Safety Fe)
Various Shooting Methods Adjusting Exposure for Built-in Flash Shooting (Safety FE) Shooting Mode The camera automatically changes the shutter speed or aperture value when the flash fires to avoid overexposing and blowing out the highlights in the scene. In the flash adjustment setting is configured to [Auto] in advance (p. 116). Select [Safety FE].
Page 123: Registering Settings To The Print/Share Button
Registering Settings to the Print/ Share Button Shooting Mode You can register a function that you often use when shooting with the button. The following functions can be registered. Menu Item Not Assigned White Balance Custom White Balance Select [Set 1.
Page 124: Setting The Display Overlays
Various Shooting Methods Press the To Cancel the Shortcut Button Select in Step 2. Using the Press the • For , each time that the settings are switched. • For , the corresponding setup screen is displayed. • Each press of the with the option.
Page 125: Saving Custom Settings
Select [Disp. Overlay]. 1. Press the 2. In the menu, use the button to select [Disp. Overlay]. Accept the setting. 1. Use the [Off], [Grid Lines], [Both] or [3:2 Guide]. 2. Press the Only grid lines can be configured for the The grid lines and 3:2 guide will not be recorded in the image.
Page 126 Various Shooting Methods Register the desired contents. • Adjust the mode dial to the mode you wish to register. • Set the shooting function you wish to register - Shooting mode ( - Items which can be set in (p. 214) - Rec.
Page 127: Setting The Auto Rotate Function
Setting the Auto Rotate Function Shooting Mode Your camera is equipped with an Intelligent Orientation sensor that detects the orientation of an image shot with the camera held vertically and automatically rotates it to the correct orientation when viewing it in the LCD monitor.
Page 128: Creating An Image Destination (Folder)
Various Shooting Methods When the camera is held vertically to shoot, the Intelligent Orientation sensor judges the upper end to be “up” and the lower end to be “down”. It then regulates the optimal white balance, exposure and focus for vertical photography. This function operates regardless of the on/off status of the Auto Rotate function.
Page 129 Accept the setting. 1. Use the mark [Create New Folder]. 2. Press the • will be displayed on the LCD monitor when shooting. disappear from the screen when a new folder is created. Setting the Day or Time for Automatic Folder Creation. Select [Create Folder].
Page 130: Resetting The File Number
Various Shooting Methods Resetting the File Number Shooting Mode The images you shoot are automatically assigned file numbers. You can select how the file number is assigned. A number one higher than the last one recorded is assigned to the next image. This is convenient for managing all your images together on a computer because you avoid file name duplication when changing folders or memory cards.* Continuous...
Page 131 File and Folder Numbers Recorded images are assigned consecutive file numbers starting with 0001 and ranging up to 9999, while folders are assigned numbers starting with 100 and ranging up to 999. Up to 2000 images can be saved into a single folder. New Folder Created Memory Card 1 Continuous...
Page 132: Playback/Erasing
Playback/Erasing Playback/Erasing Magnifying Images Press the zoom lever toward • The image is magnified and will display at the top right of the screen. • Images can be magnified up to a factor of 10x. Use the image around. • If you press the FUNC./SET button while in magnified display, the camera switches to image advance mode and display.
Page 133: Viewing Images In Sets Of Nine (Index Playback)
Viewing Images in Sets of Nine (Index Playback) Press the zoom lever toward • Up to nine images can be viewed at once in index playback. • Use the change the image selection. To Return to Single Image Playback Press the zoom lever toward Switching between Sets of Nine Images The jump bar will display if you press the zoom lever toward in index playback and you can switch the display between sets of nine...
Page 134: Checking The Focus And Peoples' Expressions (Focus Check Display)
Playback/Erasing Checking the Focus and Peoples' Expressions (Focus Check Display) Focus Check display allows you to check the focus of images taken. At this time, faces in the image are detected and frames matching the size of these facial images are displayed. Moreover, as you can change the display magnification and switch images, you can easily check facial expressions and whether a subject's eyes are closed.
Page 135 Switching Frames Press • When multiple in-focus frames are displayed, or when multiple faces are detected, the position of the orange colored frame will change each time the FUNC./ SET button is pressed. After you change the display magnification, the orange frame will adjust to the size of the face when you switch the position of the frame.
Page 136: Jumping To Images
Playback/Erasing Jumping to Images When you have many images recorded onto a memory card, it is handy to use the five search keys below to jump over images to find the object of your search. Jump 10 Images Jump 100 Images Jump Shot Date Jump to Movie Jump to Folder...
Page 137: Viewing Movies (Movie Replay Control Panel)
Viewing Movies (Movie Replay Control Panel) Movies cannot be played in the index playback mode. Display the movie file. 1. Use the movie. 2. Press the • Images with a movies. • The Movie Control Panel is displayed. Play the movie. 1.
Page 138: Operating The Movie Control Panel
Playback/Erasing Operating the Movie Control Panel Use the button to select and press the FUNC./SET button. Exit Ends playback and returns to single image playback Prints (An icon will display when a printer is Print connected. See the Direct Print User Guide for details.) Play Play...
Page 139: Rotating Images In The Display
Rotating Images in the Display Images can be rotated clockwise 90° or 270° in the display. Original Select [Rotate]. 1. Press the 2. In the menu, use the button to select [ 3. Press the Rotate the image. 1. Use the 2.
Page 140: Playback With Transition Effects
Playback/Erasing Playback with Transition Effects You can select the transition effect displayed when switching between images. No transition effect. The displayed image darkens and the next image gradually brightens until it is displayed. Press the button to have the previous image display from the left and the button to have the next image display from the right.
Page 141: Automated Playback (Auto Play)
Automated Playback (Auto Play) Use this feature to automatically play back all of the images in the memory card. The LCD monitor displays each image for approximately 3 seconds. Select [Auto Play]. 1. Press the 2. In the menu, use the button to select [ 3.
Page 142: Red-Eye Correction Function
Playback/Erasing Red-Eye Correction Function You can correct red eyes in recorded images. Red eyes may not be automatically detected in some images or the results may not turn out as you intended. Examples: - Faces near the screen edges or faces that appear extremely small, large, dark or bright in relation to the overall image.
Page 143 Correct the image. 1. Use the select [Start]. 2. Press the Save the image. 1. Use the select [New File] or [Overwrite]. 2. Press the • [New File]: Saved as new file with a new name. The uncorrected image is stored. The new image is stored as the last file.
Page 144 Playback/Erasing When there is not enough space left on the memory card, red-eye correction cannot be performed. Although you can apply red-eye correction any number of times to an image, the image quality will gradually deteriorate with each application. Since the correction frame will not appear automatically on images that have already been corrected once with the (Red-Eye Correction) function, use the [Add Frame] option to correct them.
Page 145 Add Correction Frame Select [Add Frame]. 1. Use the to select [Add Frame]. 2. Press the • A green frame will display. Adjust the position of the frame. 1. Use the to move the frame. • Size of the frame can be changed with the zoom lever.
Page 146 Playback/Erasing Removing Correction Frames Select [Remove Frame]. 1. Use the to select [Remove Frame]. 2. Press the Adjust the position of the frame. 1. Use the a frame to remove. • The selected frame will appear in green. Delete the frame. 1.
Page 147: Resizing Images
Resizing Images You can resave images that were recorded at high recording pixel settings at lower settings. 1600 x 1200 pixels 640 x 480 pixels 320 x 240 pixels Select [Resize]. 1. Press the 2. In the menu, use the button to select [ 3.
Page 148 Playback/Erasing Save the image. 1. Use the [OK]. 2. Press the • The resized image will be saved in a new file. • If you wish to continue resizing of another image, repeat Step 2. Display the saved image. 1. Press the 2.
Page 149: Attaching Sound Memos To Images
Attaching Sound Memos to Images In playback mode, you can attach sound memos (up to 1 min.) to an image. The sound data is saved in the WAVE format. Select [Sound Memo]. 1. Press the 2. In the menu, use the button to select [ 3.
Page 150: Protecting Images
Playback/Erasing Sound Memo Panel Use the button to select an option and press FUNC./SET Exit Returns to the playback screen. Record Starts recording. Pause Pauses recording or playback. Play Begins playback. Erase Erases sound memos. You cannot attach sound memos to movies. Sound memos for protected images cannot be erased.
Page 151: Erasing All Images
Erasing All Images Note that erased images cannot be recovered. Exercise adequate caution before erasing an image. Protected images cannot be erased with this function. Select [Erase all]. 1. Press the 2. In the menu, use the button to select [ 3.
Page 152: Print Settings/Transfer Settings
Print Settings/Transfer Settings Print Settings/Transfer Settings Setting the DPOF Print Settings You can select images on a memory card for printing and specify the number of print copies in advance using the camera. The settings used on the camera comply with the Digital Print Order Format (DPOF) standards.
Page 153 Select [Print Settings]. 1. Set the mode switch to 2. Press the 3. Use the menu. 4. Use the [Print Settings]. 5. Press the Accept the setting. 1. Use the [Print Type], [Date], [File No.] or [Clear DPOF data]. 2. Use the setting to configure.
Page 154 Print Settings/Transfer Settings Single Images Select [Select Images & Qty.]. 1. Set the mode switch to 2. Press the 3. Use the menu. 4. Use the [Select Images & Qty.]. 5. Press the • Selecting [Clear All Selections] cancels all print settings. Select the images.
Page 155 Index ( 1. Use the 2. Select and deselect with 3. Press the • You can also select images in the index playback mode. • If the camera is connected to a printer, the in blue while images are being selected.
Page 156 Print Settings/Transfer Settings Select [OK]. 1. Use the [OK]. 2. Press the The output of some printers or photo developing services may not reflect the specified print settings. Print settings cannot be set for movies. Images are printed in order according to the file number. A maximum of 998 images can be selected.
Page 157: Setting The Dpof Transfer Settings
Setting the DPOF Transfer Settings You can use the camera to specify settings for images before downloading to a computer. Refer to the Software Starter Guide for instructions on how to transfer images to your computer. The settings used on the camera comply with the DPOF standards. icon may display for a memory card with transfer settings set by a different DPOF-compliant camera.
Page 158 Print Settings/Transfer Settings All the Images on a Memory Card Select [Transfer Order]. 1. Set the mode switch to 2. Press the 3. In the menu, use the button to select [ 4. Press the Select [Mark all]. 1. Use the [Mark all].
Page 159: Connecting To A Tv
Connecting to a TV Shooting/Playback Using a TV You can use the supplied AV cable to shoot or playback images using a TV. Turn off the camera and the TV. Connect the AV cable to the camera’s A/V OUT ter- minal.
Page 160: Troubleshooting
(p. 9). Reload the batteries in the correct direction (p. 8). Use only unused AA-size alkaline batteries or Canon AA-size NiMH batteries (p. 178). Replace the camera batteries with 4 unused or fully charged batteries (p.
Page 161 Sounds come from the camera interior. The camera’s horizontal/ vertical orientation was changed. When the power is turned on “Card locked!” message appears. The SD memory card’s or SDHC memory card’s write protect tab is set to “Write protect”. The Date/Time menu appears. The lithium date battery charge is depleted.
Page 162 Troubleshooting A bar of light (purplish red) appears on the LCD monitor. Sometimes appears when shooting a bright subject, such as the sun or other light source. appears. A slow shutter speed has likely been selected because of insufficient lighting. appears.
Page 163: Camera Will Not Record
Format the memory card (p. 56). If reformatting does not work, the memory card logic circuits may be damaged. Consult the nearest Canon Customer Support Help Desk. Slide the write protect tab upward (p. 180).
Page 164 Troubleshooting AF-assist Beam is set to [Off]. Subject is out of focal range. Shoot with the subject at the correct The subject is hard to focus Subject in recorded image is too dark. Insufficient light for shooting. Set the flash to The subject is underexposed because the surroundings are too bright.
Page 165 Too much light is shining directly into the camera, or is being reflected off the subject. Flash is set to on. Image contains noise. ISO speed is too high. White dots appear on the image. Light from the flash has reflected off dust particles or insects in the air.
Page 166 Troubleshooting Continuous shooting slows down. The memory card’s performance has dropped. Recording images to memory card takes a long time. Memory card was formatted in another device. Lens will not retract. Memory card slot/battery cover was opened with power on. Shooting movies The recording time may not display properly or shooting may stop unexpectedly.
Page 167 “!” displayed on the LCD monitor in red and shooting automatically stopped. There is insufficient free space in the camera’s built- in memory. Zoom does not operate. Zoom lever was pressed while shooting in movie mode. Playback Cannot play back. You attempted to play back images shot with another camera or images edited...
Page 168 Batteries are not the right type. Battery capacity drops due to low ambient temperatures. Battery terminals are dirty. If using Canon AA-size NiMH batteries As the batteries have not been used for over a year, their recharging capacity has decreased. Battery life has been exceeded.
Page 169 Printing with a direct print compatible printer Cannot print The camera and printer are not properly connected. The printer power is not turned on. The print connection method is not correct. Troubleshooting Securely connect the camera and printer with the specified cable. Turn on the printer power.
Page 170: List Of Messages
However, if this error message appears even when using the supplied memory card, contact your Canon Customer Support Help Desk as there may be a problem with the camera. Memory card full...
Page 171 Change the batteries Battery charge is insufficient to operate the camera. Replace batteries immediately with unused AA-size alkaline batteries or fully charged Canon AA-size NiMH batteries. Also refer to Battery Handling Precautions (p. 178). No image. No images recorded on memory card.
Page 172 List of Messages Incompatible WAVE A sound memo cannot be added to this image since the data type of the existing sound memo is incorrect, or the sound memo cannot be played back. Cannot modify image You attempted to resize or perform red-eye correction on a movie or an image recorded with another camera.
Page 173 Try turning the power back on, and resume shooting or playback. If this message continues to display, contact your Canon Customer Support Help Desk as there may be a problem with the lens.
Page 174: Appendix
Appendix Appendix Safety Precautions Before using the camera, please ensure that you read the safety precautions described below and in the “Safety Precautions” section. Always ensure that the camera is operated correctly. The safety precautions noted on the following pages are intended to instruct you in the safe and correct operation of the camera and its accessories to prevent injuries or damage to yourself, other persons and equipment.
Page 175: Warnings
Immediately turn the camera power off and remove the camera batteries or unplug the battery charger or compact power adapter from the power outlet. Please consult your camera distributor or the closest Canon Customer Support Help Desk. Warnings Equipment...
Page 176 Appendix Equipment Do not use substances containing alcohol, benzine, thinners or other flammable substances to clean or maintain the equipment. Do not cut, damage, alter or place heavy items on the power cord. Use only recommended power accessories. Remove the power cord on a regular periodic basis and wipe away the dust and dirt that collects on the plug, the exterior of the power outlet and the surrounding area.
Page 177 Appendix Battery When recharging the Canon AA-size NiMH batteries, use only a specified battery charger. The compact power adapter is designed for exclusive use with this equipment. Do not use it with other products. There is a risk of overheating and distortion which could result in fire or electrical shock.
Page 178: Cautions
Appendix Cautions Equipment Be careful not to bang the camera or subject it to strong impacts or shocks that could lead to injury or damage the equipment when wearing or holding it by the strap. Do not store or use the equipment in humid or dusty areas. During shooting, do not allow metal objects (such as pins or keys) or dirt to contact the charger terminals or plug.
Page 179: Preventing Malfunctions
Appendix Flash Do not operate the flash with dirt, dust or other items stuck to the surface of the flash. Be careful not to cover the flash with your fingers or clothing when shooting. The flash may be damaged and emit smoke or noise. The resulting heat build-up could damage the flash.
Page 180: Battery Handling
When using the camera under low temperature conditions or over long periods, you are recommend to use of Canon AA- size NiMH batteries (sold separately). Camera operating time may shorten at low temperatures when alkaline batteries are used.
Page 181 Before installing the batteries, wipe the battery terminals well with a dry cloth. If the battery terminals are soiled with oil from one’s skin or other dirt, the number of recordable images may be considerably diminished, or the amount of time the camera can be used may be reduced.
Page 182: Handling The Memory Card
Appendix Handling the Memory Card SD memory card or SDHC memory card Write Protect Tab Slide the tab up. Writing/Erasing Possible Cautions When Handling Memory cards are high-precision electronic devices. Do not bend them, apply force to them, or subject them to shocks or vibration.
Page 183 • When the camera is malfunctioning, a corrupted memory card might be the cause. Reformatting the memory card may solve the problem. • When a non-Canon brand memory card is malfunctioning, reformatting it may solve the problem. • Memory cards formatted in other cameras, computers, or peripheral devices may not operate correctly in this camera.
Page 184: Using The Power Kits (Sold Separately)
The CB-5AH/CB-5AHE battery charger can only be used to charge Canon AA-size NiMH batteries NB-3AH and NB- 2AH. Please do not attempt to charge other type of battery. Do not mix batteries with different purchase dates or different charge states.
Page 185 Replace them with new batteries. If you are purchasing new batteries, look for Canon AA-size NiMH batteries. Leaving batteries in the camera or charger may result in damage from battery leakage. When not in use, remove the batteries from the camera or charger and store them in a cool, dry location.
Page 186 When two batteries are placed on each side of the charger, recharging will take approximately two hours (as determined by testing at Canon facilities). Charge batteries in an environment where the temperature is in the range of 0 to 35°C (32 to 95°F).
Page 187: Using The Lenses (Sold Separately)
Using the Lenses (Sold Separately) The camera supports use of the separately sold Wide Converter WC- DC58B and Tele-converter TC-DC58C. In order to attach these lenses, you also need to use the separately sold Conversion Lens Adapter LA-DC58J. When attaching the wide converter, tele-converter, be sure to screw it on securely.
Page 188: Attaching A Lens
Appendix Attaching a Lens Be sure that the camera is turned off. Press the ring release button and hold it down (a), and turn the ring in the direction of the arrow (b). When the mark on the ring are aligned, lift off the ring. Ring Ring Release Button mark on the camera and the...
Page 189 Align the mark on the conversion lens adapter with the turn the adapter in the direction of the arrows as far as the • To remove the conversion lens adapter, turn the adapter in the opposite direction with holding down the ring release button. Set the lens on the adapter, and turn it in the indicated direction to attach it...
Page 190 Appendix Converter Settings Settings for when shooting using [IS Mode] (p. 70) with the separately sold Wide Converter WC-DC58B or Tele-converter TC-DC58C attached. Set the mode switch to Select [Converter]. 1. Press the 2. In the menu, use the button to select [Converter]. Accept the setting.
Page 191: Using An Externally Mounted Flash (Sold Separately)
Using an Externally Mounted Flash (Sold Separately) High-Power Flash HF-DC1 This flash is used to supplement the camera’s built-in flash when the subject is too far away for proper illumination. Use the following procedures to affix the camera and High-Power Flash to the supporting bracket.
Page 192 Appendix For continuous shooting, although the flash fires for the first shot, it does not fire for subsequent shots. Fasten the attachment screws securely so that they do not loosen. Failure to do so may lead to the dropping of the camera and flash resulting in damage to both.
Page 193: Camera Care And Maintenance
Never use organic solvents on the camera body or lens. If dirt remains, contact the closest Canon Customer Support Help Desk as listed on the customer support list supplied with your camera.
Page 194: Specifications
Appendix Specifications All data is based on Canon’s standard testing methods. Subject to change without notice. PowerShot A650 IS Camera Effective Pixels : Approx. 12.1 million Image Sensor Lens Digital Zoom Optical Viewfinder LCD Monitor AF System Focusing Range Shutter...
Page 195 Metering System Exposure Compensation : ±2 stops in 1/3-stop increments ISO speed (Standard Output Sensitivity, Recommended Exposure Index) White Balance Built-in Flash Compensation Range of Built-In Flash Flash Exposure Compensation Shooting Modes Continuous Shooting Self-timer : Evaluative* , Center-weighted average or Spot* *1 When [AF Frame] is set to [Face Detect], the brightness of the face is also evaluated *2 Fixed to center/AF Point...
Page 196 : Design rule for camera file system and DPOF compliant Sound memos: WAVE (monaural) * This digital camera supports Exif 2.2 (also called “Exif Print”). Exif Print is a standard for enhancing the communication between digital cameras and printers. By connecting to an Exif Print-compliant printer, the camera’s image data at the time of...
Page 197 9 images at once.), Auto Play, Sound memos (up to 1 min.) or Movie (slow motion play back possible). : PictBridge compliant, and Canon Direct Print and Bubble Jet Direct compatible : USB 2.0 Hi-Speed (mini-B) Audio/Video output...
Page 198: Battery Capacity
Power is left off for a sufficient amount of time*, then the power is turned back on and the testing procedure is repeated. • A Canon-brand memory card is used. * Until the battery returns to normal temperature Playback: Normal temperature (23°C ±2°C/73°F ±3.6°F), normal relative humidity (50% ±20%), continuous playback at 3...
Page 199 Capable of smooth continuous shooting (p. 88) when memory card has been formatted with a low level format. • This reflects standard shooting criteria established by Canon. Actual results may vary according to the subject and shooting conditions. : Memory card included with the camera...
Page 200 Appendix Movie Recording Pixels /Frame Rate 640 x 480 pixels 30 frames/sec. 640 x 480 pixels 30 frames/sec., Standard 320 x 240 pixels 30 frames/sec. 160 x 120 pixels 15 frames/sec. Compact Maximum movie clip length at • maximum continuous recording time. Image Data Sizes (Estimated) Recording Pixels 4000 x 3000 pixels...
Page 201: Sd Memory Card
MultiMediaCard Interface Dimensions Weight SD Memory Card Interface Dimensions Weight NiMH Battery NB-3AH (Supplied with the separately sold NiMH Battery NB4-300 set or the Battery and Charger Kit CBK4-300) Type Nominal Voltage Typical Capacity Cycle Life Operating Temperatures Dimensions Weight Compatible with MultiMediaCard standards 32.0 x 24.0 x 1.4 mm (1.3 x 0.9 x 0.06 in.) Approx.
Page 202 Appendix Battery Charger CB-5AH/CB-5AHE (Supplied with the separately sold Battery and Charger Kit CBK4-300) Rated Input Rated Output Charging Time Operating Temperatures Dimensions Weight (body only) *1 When charging four NB-3AH batteries *2 When charging two NB-3AH batteries loaded one on each side of the battery charger Compact Power Adapter CA-PS500 (Included with the separately sold AC Adapter Kit ACK600)
Page 203 Thread Diameter Dimensions Diameter x Length Weight *1 When mounted on PowerShot A650 IS (Max. wide angle) *2 From front of the mounted tele-converter. *3 Conversion Lens Adapter LA-DC58J is required when mounted on PowerShot A650 IS *4 When mounted on PowerShot A650 IS (Max. telephoto) Approx.
Page 204: Index
Index Index Numerics 1st-curtain ... 119 2nd-curtain ... 119 3:2 Guide ... 45 AC Adapter Kit ACK600 ... 184 AE Lock ... 101 AF Frame ... 50 AF Lock ... 97 AF-assist Beam ... 45 AiAF ... 44 Aperture Value ... 85 Auto ISO Shift ...
Page 205 Flash ...62 Flash Adjustment ...117 Flash Output ...118 FlexiZone ...93 Focus ... 16 Focus Check ...91 Focus Lock ...97 Formatting ... 55 Frame Rate ...79 FUNC. Menu ...44 FUNC./SET ... 40 Functions Available ...214 Grid Lines ... 45 HF-DC1 ... 34 High-Power Flash ...189 Histogram ...54 Image Data Sizes (Estimated) 198...
Page 206 Index Mode Switch ... 15 Movie Playback ... 21 Shooting ... 19 Mute ... 46 My Colors ... 114 Night Display ... 49 Night Scene ... 74 Night Snapshot ... 74 Operation Sound ... 46 Operation Vol..46 Overexposure Warning ... 54 Play Menu ...
Page 207 Indoor ...75 ISO 3200 ...76 Night Scene ...74 Snow ...75 Underwater ...76 Stitch Assist ...80 Shutter Button Pressing Fully ...16 Shutter Speed ... 83 Shutter Volume ...46 Slow Synchro Function ... 44 Smooth Continuous Shooting ...88 Sound Memo ...147 Speaker ...38 Special Scene ...74 Spot AE Point Frame ...
Page 208 Index NOTE...
Page 209 Index NOTE...
Page 210 Index NOTE...
Page 211 Index NOTE...
Page 212 Index NOTE...
Page 213 Index NOTE...
Page 214 • Consult the dealer or an experienced radio/TV technician for help. The cable with the ferrite core provided with the digital camera must be used with this equipment in order to comply with Class B limits in Subpart B of Part 15 of the FCC rules.
Page 215: Trademark Acknowledgments
• While every effort has been made to ensure that the information contained in this guide is accurate and complete, no liability can be accepted for any errors or omissions. • Canon reserves the right to change the specifications of the hardware and software described herein at anytime without prior notice.
Page 216: Functions Available In Each Shooting Mode
Functions Available in Each Shooting Mode Functions Available in Each Shooting Mode Set each function according to the shooting conditions and then shoot. +/- (Exp.) Auto ISO Speed High ISO Auto ISO 80/100/200/400/800/1600 Auto White Balance Day Light/Cloudy/Tungsten/Fluorescent/ Fluorescent H/Underwater/Custom Single Shot Continuous Shooting Drive Mode...
Page 217 – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –...
Page 218 Functions Available in Each Shooting Mode AF Frame Size Standard Digital Zoom Digital Tele-converter Flash Output (2nd-curtain) Slow Synchro Flash Sync Flash Adjust (Manual) Red-eye Safety FE Center Spot AE Point AF Point Safety Shift button/Auto Auto ISO Shift MF-Point Zoom Safety MF AF-assist Beam Review...
Page 219 – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –...

This manual is also suitable for:

2089b001

Canon Powershot A650 IS User Manual

Functions or Procedures.

Learning more

Shooting Using the Mode Dial

Various Shooting Methods

Playback/Erasing

Print Settings/Transfer Settings

Connecting to a TV

Troubleshooting

List of Messages

Appendix

Index

Functions Available in each Shooting Mode

Quick Links

Related Manuals for Canon Powershot A650 IS

Summary of Contents for Canon Powershot A650 IS

This manual is also suitable for:

Table of Contents