Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: BEFORE USiNG THiS pRODUcT, pLEASE READ THE iNSTRUcTiONS cAREFULLY. MAKE cAREFUL NOTE OF SAFETY
iNSTRUcTiONS, WARNiNGS AND cAUTiONS. THiS pRODUcT SHOULD ONLY BE USED FOR iTS iNTENDED pURpOSE. FAiLURE TO DO
SO MAY cAUSE DAMAGE AND/OR pERSONAL iNJURY AND WiLL iNVALiDATE THE WARRANTY. RETAiN THESE iNSTRUcTiONS FOR
FUTURE USE.
1. SAFETY iNSTRUcTiONS
1.1
GENERAL SAFETY
Only use the sprayer for its intended purpose.
Familiarise yourself with the applications, limitations, and
potential hazards of this product.
Use original Sealey spare parts only. Unauthorised parts may
be dangerous and will invalidate the warranty.
Ensure containers cannot easily be knocked over during
filling.
Always ensure good contact on the 12V battery.
Mark fluid containers with hazard labels to show their
contents.
Keep any fluid containers in a well ventilated, lockable store,
preferably outside the working area.
Keep children and unauthorised persons away from the
working area, especially when the sprayer is in operation.
Keep the work area childproof by using padlocks and master
switches.
Maintain the sprayer in top condition. Keep it clean for best
and safest performance.
Follow the same precautions when transferring fluid from the
sprayer back into other containers.
Ensure the sprayer is securely fixed to the ATV.
Always inspect and prepare the sprayer before use
according to the directions provided in this manual.
Keep the sprayer turned off. Do not turn on power to the
sprayer until ready to spray in order to avoid unintentional
spray release.
Never spray when wind speed exceeds 4mph in order to
minimize spray drift.
DO NOT over apply pesticide. Apply at a rate
recommended by agents manufacturer. Excess pesticide
can be dangerous to humans, damage desirable plants, and
contaminate soil and water sources.
Never point the spray gun at people or animals.
DO NOT eat, drink, rub your eyes, or touch any part of your
bare skin while handling agents and spraying.
DO NOT spray near open flames or sources of heat.
Always clean up spills immediately per instructions
on the agents label.
Turn off vehicle and set brake or block wheels, turn
off power to sprayer, and relieve system pressure before
leaving sprayer unattended.
DO NOT use an open flame or smoke anywhere near the
sprayer or around stored fluid.
DO NOT spray fluid into dedicated workshop oil spray
equipment.
DO NOT use any electrical equipment on or near the vehicle
while fluid spraying is in progress. This includes the use of
inspection lights, mobile phones or pagers.
DO NOT use the sprayer if the pump is damaged in any way.
DO NOT use whilst under the influence of drugs, alcohol or
other intoxicating medication, or if you are fatigued.
1.2
ELEcTRicAL cONNEcTiON SAFETY
If the battery terminals are corroded or dirty, clean them
before using the tester.
Disconnect the power after every use to avoid accidental
starting.
DO NOT disassemble the remote switch for any reason. The
tester must only be checked by qualified service personnel.
WARNiNG! To prevent the risk of sparking, short circuit and
possible explosion DO NOT drop metal tools in the battery
area, or allow them to touch the battery terminals.
DO NOT cross-connect remote switch clamps. Ensure
positive (RED) clamp is to positive terminal and negative
(blAcK) clamp is to negative terminal.
1.3
cHEMicAL SAFETY
1.3.1
First and foremost ensure you read the safety data sheet
of the substance you are going to spray.
1.3.2
The sprayer is intended for use in spraying agricultural
pesticides and other non-flammable liquids.
1.3.3
Spraying pesticides - Pesticides are hazardous agents that
must be handled with caution as directed throughout this
manual and on the pesticide label. The sprayer is intended
for use in spraying pesticides in liquid form only. The sprayer
is NOT intended for use in spraying pesticides in dry or in
aerosol form, or for use with fumigants.
Sprayers SS60 and SS98 come equipped with a spot spray
gun and a tank-mounted broadcast spraying system. Use the
spot spray gun if you desire to apply pesticide only on
selected plants. Use the broadcast spraying system if you
wish to spray large ground areas
1.3.4
Spraying Other liquids - In addition to spraying pesticides,
this sprayer may be used to spray other non-flammable
liquids. Example uses include: watering plants/trees or
spraying water for dust control, applying ice control
agents, applying water-based, non-flammable sealant
or stain to outdoor wood surfaces.
1.3.5
However, WE REcOMMEND THAT THE SPRAYER NOT bE
USED FOR OTHER PURPOSES ONcE IT HAS AlREADY
bEEN USED FOR SPRAYING PESTIcIDES. Any agents
will leave some residual in the tank liner or sprayer
components, even after the sprayer has been properly
cleaned. These residual agents can have unexpected
effects on future uses. For example, spraying water or
other liquids that are contaminated with residual pesticide
may result in unforeseen hazards to plant or animal life.
2. iNTRODUcTiON
ATV spot/broadcast sprayers supplied with tie-down straps to attach
to most all terrain vehicles. Powered by 12V battery or connected via
12V supply on ATV. Quiet running diaphragm pump is pressure
activated producing a smooth flow from the tank. Supplied with
trigger operated lance providing controlled application and broadcast
lance for hands-free operation. Features remote operated on/off
switch and battery clips. Tank is manufactured using chemical
resistant material and is fitted with tank drainage spout for draining
unwanted contents. Tank also features extra-thick walls and is
UV-stabilized to prevent fading. Suitable for use with a variety of
different agents including weed killer, de-icer and for spraying
fertilizer.
Original Language Version
INSTRUcTIONS FOR:
BROADcAST / SpOT
SpRAYERS
SS60, SS98
MODEl N
'
:
o
s
SS60, SS98
.
Issue: 1 - 23/11/11
Advertisement
Related Manuals for Sealey SS60
Summary of Contents for Sealey SS60
- Page 1 SS60, SS98 MODEl N Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: BEFORE USiNG THiS pRODUcT, pLEASE READ THE iNSTRUcTiONS cAREFULLY. MAKE cAREFUL NOTE OF SAFETY iNSTRUcTiONS, WARNiNGS AND cAUTiONS.
-
Page 2: Specification
Model No ......SS60 ... . . - Page 3 Slide the hose clamp around the hose barb and tighten. Attach the sprayer to the vehicle (see fig.7) 5.8.1 Use the hooked straps supplied to secure each end to an fig.4 ATV rack (not supplied) fig.7 Original Language Version SS60, SS98 Issue: 1 - 23/11/11...
- Page 4 Turn off power to the sprayer before filling. The vehicle should also be off, with wheels chocked to prevent unintended movement. 6.3.4 Remove the fill cap located on top of the sprayer. (fig.8). fig.8 Original Language Version SS60, SS98 Issue: 1 - 23/11/11...
- Page 5 Sprayer Becomes inoperable 8.5.1 If the sprayer becomes clogged or stops working do not attempt to repair whist agents are still in the sprayer tank. 8.5.2 Review the troubleshooting table to proceed. Original Language Version SS60, SS98 Issue: 1 - 23/11/11...
-
Page 6: After Use
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim. iNFORMATiON: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode. Sole UK Distributor, Sealey Group, www.sealey.co.uk...