Advertisement
Quick Links
MODELs
thank you for purchasing a sealey product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEAsE READ THEsE INsTRUCTIONs CAREFULLY. NOTE THE sAFE OPERATIONAL REQUIREMENTs, WARNINGs & CAUTIONs.
UsE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOsE FOR WHICH IT Is INTENDED. FAILURE TO DO sO MAY CAUsE
DAMAGE AND/OR PERsONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEAsE KEEP INsTRUCTIONs sAFE FOR FUTURE UsE.
1. sAFETY INsTRUCTIONs
3 Always load evenly with the centre of gravity of the load as near the centre of the truck as possible.
3 obtain additional support for large or wide loads to prevent tipping.
7 Do not overload the truck - see specifications.
7 Do not leave unattended, especially when loaded, unless the wheels are chocked or the truck is otherwise secured.
7 Do not use truck on uneven ground and do not run over curbs or steps - use a ramp.
7 Do not allow others to ride on the truck.
7 Do not use the truck if any part is significantly damaged - pay particular attention to the wheels.
2. sPECIFICATIONs
. . . . . . . . . . . . . . . . . . . . . . .
Max. Load. . . . . . . . . . . . . . . . . . . . . . . . . 150kg
Wheel Diameter . . . . . . . . . . . . . . . . . . . 100mm
Deck Length/Width/Height . . . . 725/465/140mm
overall Height. . . . . . . . . . . . . . . . . . . . . 815mm
3. AssEMBLY & UsE
Numbers/letters in brackets refer to those on the relevant parts diagrams below.
3.1
CsT991 & CsT992
3.1.1
remove the bolts and washers (c) from the underside corners of the deck and use them to attach the wheels (A, B).
Note! two wheels are swivel castors (B), these should be fitted at the handle end of the deck.
3.1.2
to fold down the platform truck handle frame (cst991.V2, cst992.V2 only) push down the release bar (D) and fold the handle over
the base, release bar when in place.
3.2
CsT993
3.2.1
remove the bolts (c) and washers (D) from the underside corners of the deck and use them to attach the wheels (A, B).
Note! two wheels are swivel castors (B), these should be fitted at the handle end of the deck.
3.2.2
remove the two bolts (f) from the ends of the handle frame (G).
3.2.3
Locate the ends of the handle frame in the sockets in the deck frame and retain with the screws.
4. PARTs
CsT991.V2, CsT992.V2
A - cst991.V2-01
fixed castor
B - cst991.V2-02
swivel castor
c - cst991.V2-03
fixings for castors
A - cst992.V2-01
fixed castor
B - cst992.V2-02
swivel castor
c - cst992.V2-03
fixings for castors
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: no liability is accepted for incorrect us e of product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
CsT991.V2
CsT991.V
CsT992.V2
. . . . . . . . . .
300kg
. . . . . . . . .
125mm
. .
910/605/209mm
. . . . . . . . .
863mm
sole UK Distributor
sealey Group,
Bury st. Edmunds, suffolk.
InstructIons for:
PLATFORM TRUCKs
CsT992.V2
CsT993.V2
. . . . . . . . . . 250kg
. . . . . . . . .125mm
. .949/496/226mm
. . . . . . . . . 961mm
CsT993.V2
A - cst993.V2-01
B - cst993.V2-02
c/D - cst993.V2-03
01284 757500
01284 703534
cst991.V2, cst992.V2, cst993.V2
CsT993.V2
fixed castor
swivel castor
fixings for castors
www.sealey.co.uk
W e b
sales@sealey.co.uk
email
Issue: 1 - 15/01/09
Advertisement
Related Manuals for Sealey CST991.V2
Summary of Contents for Sealey CST991.V2
- Page 1 Note! two wheels are swivel castors (B), these should be fitted at the handle end of the deck. 3.1.2 to fold down the platform truck handle frame (cst991.V2, cst992.V2 only) push down the release bar (D) and fold the handle over the base, release bar when in place.