Page 1 CD-ROM at any time, please keep the CD-ROM in a convenient place for quick and easy reference at all times. You can also download the manual in PDF format from the Brother Solutions Center. (http://solutions.brother.com/) The Brother Solutions Center (http://solutions.brother.com/) is your one stop resource for all your printing needs.
Page 2 Trademarks The Brother logo is a registered trademark of Brother Industries, Ltd. Brother is a registered trademark of Brother Industries, Ltd. Microsoft, Windows, Windows Server and Internet Explorer are registered trademarks of Microsoft Corporation in the United States and/or other countries.
Page 3: Compilation And Publication Notice
Compilation and publication notice Under the supervision of Brother Industries Ltd., this manual has been compiled and published, covering the latest product’s descriptions and specifications. The contents of this manual and the specifications of this product are subject to change without notice.
Page 4: Brother Numbers
Visit http://www.brother.com/ for contact information on your local Brother office. Service center locator (USA) For the location of a Brother authorized service center, call 1-877-BROTHER (1-877-276-8437). Service center locations (Canada) For the location of a Brother authorized service center, call 1-877-BROTHER.
Page 5: Ordering Accessories And Supplies
Internet address Brother Global Web Site: http://www.brother.com/ For Frequently Asked Questions (FAQs), Product Support, Driver Updates and Utilities: http://solutions.brother.com/ Ordering accessories and supplies In USA: 1-877-552-MALL (1-877-552-6255) 1-800-947-1445 (fax) http://www.brothermall.com/ In Canada: 1-877-BROTHER http://www.brother.ca/...
Page 6: Table Of Contents
Table of Contents Introduction Overview...1 Network features...2 Network printing...2 Network scanning ...2 Network PC Fax (Not available for DCP-8080DN and DCP-8085DN) ...2 Fax to Server (For MFC-8880DN and MFC-8890DW) ...2 Management utilities...2 Internet fax/scan to E-mail server (MFC-8880DN and MFC-8890DW only)...4 Types of network connections ...5 Wired network connection example...5 Wireless network connection examples (For MFC-8890DW only) ...7...
Page 7 Using the SES/WPS or AOSS™ control panel menu to configure your machine for a wireless network (Automatic Wireless mode)...36 Using the PIN Method of Wi-Fi Protected Setup ...39 Using the Brother installer application on the CD-ROM to configure your machine for a wireless network ...40 Wireless configuration for Windows (For MFC-8890DW) Configuration in Infrastructure mode ...41...
Page 8 Wired Enable (MFC-8890DW wired network only)...105 WLAN Enable (MFC-8890DW wireless network only) ...105 E-mail / IFAX (MFC-8880DN and MFC-8890DW only) ...106 How to set a new default for Scan to E-mail (E-mail server) (MFC-8880DN and MFC-8890DW only) ...117 How to set a new default for Scan to FTP ...118 How to set a new default for Scan to Network ...119 Fax to Server (For MFC-8880DN and MFC-8890DW) ...120 Time Zone ...122...
Page 9 Secure Function Lock 2.0 ...144 How to configure the Secure Function Lock 2.0 settings using Web Based Management (web browser)...145 Changing the Scan to FTP configuration using a web browser...148 Changing the Scan to Network configuration using a web browser ...150 Changing the LDAP configuration using a web browser (For MFC-8880DN and MFC-8890DW) ...152 LDAP operation (For MFC-8880DN and MFC-8890DW) Overview...153...
Page 10 Using ARP to configure the IP address ...204 Using the TELNET console to configure the IP address ...205 Using the Brother Web BRAdmin server software for IIS to configure the IP address...206 Installation when using web services (Windows Vista Installation when using a Network Print Queue or Share (printer driver only) ...208 Appendix B Print server specifications...209...
Page 11: Introduction
Available when using BRAdmin Professional 3 or Web BRAdmin with devices that are connected to your client PC via the USB or parallel interface. Not available for DCP-8080DN and DCP-8085DN To use the Brother machine through a network, you need to configure the print server, and set up the computers you use.
Page 12: Network Features
You can scan documents over the network to your computer (See Network Scanning in the Software User’s Guide). Network PC Fax (Not available for DCP-8080DN and DCP-8085DN) You can directly send a file from your computer as a PC Fax over your network (See Brother PC-FAX ® Software for Windows and Sending a Fax for Macintosh in the Software User’s Guide for a complete...
Page 13 BRAdmin Professional 3 is a utility for more advanced management of network connected Brother devices. This utility can search for Brother products on your network and view the device status from an easy to read explorer style window that changes color identifying the status of each device. You can configure network...
Page 14: Internet Fax/Scan To E-Mail Server (Mfc-8880Dn And Mfc-8890Dw Only)
Internet fax/scan to E-mail server (MFC-8880DN and MFC-8890DW only) The Brother machine can be assigned an E-mail address allowing you to send, receive or forward documents over a Local Area Network or the Internet to PC’s or other Internet fax machines. Before using this function, you have to configure the necessary machine settings by using the machine’s control panel.
Page 15: Types Of Network Connections
Each computer must use the TCP/IP Protocol. The Brother machine needs to have an appropriate IP address configuration. If you are using routers, the Gateway address must be configured on the computers and the Brother machine. The Brother machine can also communicate with Macintosh (TCP/IP compatible operating systems).
Page 16: Network Shared Printing
In a larger network, we recommend a Network Shared printing environment. The “server” or the “print server” must use the TCP/IP print protocol. The Brother machine needs to have an appropriate IP address configuration unless the machine is connected via the USB or the parallel interface at the server.
Page 17: Wireless Network Connection Examples (For Mfc-8890Dw Only)
This type of network has a central access point at the heart of the network. The access point can also act as a bridge or a gateway to a wired network. When the Brother wireless machine (your machine) is part of this network, it receives all print jobs via an access point.
Page 18: Protocols
Address Resolution Protocol performs mapping of an IP address to MAC address in a TCP/IP network. DNS client The Brother print server supports the Domain Name System (DNS) client function. This function allows the print server to communicate with other devices by using its DNS name.
Page 19 Note For the IPPS protocol, see Security protocols on page 165. mDNS mDNS allows the Brother print server to automatically configure itself to work in a Mac OS X Simple Network Configured system. (Mac OS X 10.3.9 or greater). TELNET The Brother print server supports TELNET server for command line configuration.
Page 20 The Web Services also lets you check the current status of the machine from your computer. Web server (HTTP) The Brother print server is equipped with a built in web server that allows you to monitor its status or change some of its configuration settings using a web browser.
Page 21: Other Protocol
Other protocol LLTD The Link Layer Topology Discovery protocol (LLTD) lets you locate the Brother machine easily on the ® Windows Vista network map. Your Brother machine will be shown with a distinctive icon and the node name. The default setting for this protocol is Off. You can activate LLTD using the BRAdmin Professional 3 utility software.
Page 22: Configuring Your Machine For A Network
Quick Setup Guide. Note If you do not wish to, or are unable to use the Brother installer or any of Brother’s software tools, you can also use the machine’s control panel to change network settings. For more information, see Control panel setup on page 93.
Page 23: Subnet Mask
How the IP address is assigned to your print server: If you have a DHCP/BOOTP/RARP server in your network (typically a UNIX ® Windows Vista or Windows Server address from the DHCP server and register its name with any RFC 1001 and 1002-compliant dynamic name services.
Page 24: Gateway (And Router)
Gateway (and router) A gateway is a network point that acts as an entrance to another network and sends data transmitted via the network to an exact destination. The router knows where to direct data that arrives at the gateway. If a destination is located on an external network, the router transmits data to the external network.
Page 25: Setting The Ip Address And Subnet Mask
How to configure your machine using the BRAdmin Light utility Note • Please use the BRAdmin Light utility that was supplied on the CD-ROM of your Brother product. You can also download the latest Brother BRAdmin Light utility from http://solutions.brother.com/.
Page 26 Choose STATIC from Boot Method (BOOT Method). Enter the IP Address, Subnet Mask and Gateway (if needed) of your print server. ® Windows Click OK. With the correctly programmed IP address, you will see the Brother print server in the device list. Configuring your machine for a network Macintosh Macintosh...
Page 27: Using The Control Panel To Configure Your Machine For A Network
Using the control panel to configure your machine for a network You can configure your machine for a network using the control panel Network menu. See Control panel setup on page 93. Using other methods to configure your machine for a network You can configure your machine for a network using other methods.
Page 28: Changing The Print Server Settings
2000 users For Mac OS X 10.3.9 or greater users Double-click Mac OS X or Macintosh HD (Startup Disk) / Library / Printers / Brother / Utilities / BRAdmin Light.jar file. Choose the print server which you want to change the settings.
Page 29: Using The Control Panel To Change The Print Server Settings
Start the BRAdmin Professional utility (from Windows ® Windows Server 2003/2008), by clicking Start / All Programs Brother BRAdmin Professional 3 / BRAdmin Professional 3. ® Programs for Windows 2000 users Choose the print server which you want to configure.
Page 30: Using Web Based Management (Web Browser) To Change The Print/Scan Server Settings
You can configure your network printer using other methods. See Other ways to set the IP address (for advanced users and administrators) on page 201. ® 2003/2008) , Brother, MFC-XXXX LAN, then Remote Setup. Configuring your machine for a network ® application. When...
Page 31: Configuring Your Machine For A Wireless Network (For Mfc-8890Dw)
Ethernet for a faster data transfer, or USB for the fastest throughput speed. • Although the Brother MFC-8890DW can be used in a both wired and wireless network, only one connection method can be used at a time.
Page 32: Wireless Network Terms And Concepts
(how the device identifies itself to the network) and encryption (how the data is encrypted as it is sent on the network). If you do not correctly specify these options when you are configuring your Brother wireless device, it will not be able to connect to the wireless network. Therefore care must be taken when configuring these options.
Page 33: Encryption Methods
• EAP-FAST/GTC EAP-FAST authentication for CCXv4 networks. Uses GTC for the inner authentication method. Encryption methods Encryption is used to secure the data that is sent over the wireless network. The Brother wireless machine supports the following encryption methods: None No encryption method is used.
Page 34: Network Key
Network key There are some rules for each security method: Open system/Shared key with WEP This key is a 64-bit or 128-bit value that must be entered in an ASCII or hexadecimal format. • 64 (40) bit ASCII: Uses 5 text characters. e.g. “WSLAN” (this is case sensitive). •...
Page 35: Step By Step Chart For Wireless Network Configuration
Method of Wi-Fi Protected Setup Temporarily using a network cable (Windows See page 41 See page 39 (Macintosh) See page 68 See page 26 Using the Brother installer application Using the SES/WPS/AOSS™ control panel menu (Automatic Wireless mode) ® ®...
Page 36: For Ad-Hoc Mode
Wireless configuration and installing drivers and software have been completed. Configuring your machine for a wireless network (For MFC-8890DW) Infrastructure mode Connected to a computer with an access point Using the Brother installer application ® (Windows ) See page 56...
Page 37: Confirm Your Network Environment
This type of network does not have a central access point. Each wireless client communicates directly with each other. When the Brother wireless machine (your machine) is part of this network, it receives all print jobs directly from the computer sending the print data.
Page 38: Confirm Your Wireless Network Setup Method
We recommend that you use the machine’s control panel to configure your wireless network settings. By using the control panel Setup Wizard function, you can easily connect your Brother machine to your wireless network. You must know your wireless network settings before you proceed with this installation.
Page 39: Configuration Using The Pin Method Of Wi-Fi Protected Setup (Infrastructure Mode Only)
Configuration using the PIN Method of Wi-Fi Protected Setup (Infrastructure mode only) If your wireless access point (A) supports Wi-Fi Protected Setup, you can also configure using the PIN Method of Wi-Fi Protected Setup. (See Using the PIN Method of Wi-Fi Protected Setup on page 39.) Connection when the wireless access point/router (A) doubles as a Registrar Connection when another device (C), such as a computer is used as a Registrar The Registrar is a device that manages the wireless LAN.
Page 40: Configuration Using The Brother Installer Application On The Cd-Rom To Configure Your Wireless Network Machine
You can also use the Brother installer application on the CD-ROM we have provided with the printer. You will be guided by the on-screen instructions until you are able to use your Brother wireless network machine. You must know your wireless network settings before you proceed with this installation.
Page 41: Configure Your Machine For A Wireless Network
Configure your machine for a wireless network IMPORTANT • If you are going to connect your Brother machine to your network, we recommend that you contact your system administrator prior to installation. You must know your wireless network settings before you proceed with this installation.
Page 42: For Example
WPA/WPA2-PSK is a Wi-Fi Protected Access Pre-Shared Key, which lets the Brother wireless machine associate with access points using TKIP or AES encryption (WPA-Personal). WPA2-PSK (AES) and WPA-PSK (TKIP/AES) uses a Pre-Shared Key (PSK) that is 8 or more characters in length, up to a maximum of 63 characters.
Page 43 The machine will search for your network and display a list of available SSIDs. You should see the SSID you wrote down earlier. If the machine finds more than one network use the a or b keys to choose your network, then press OK.
Page 44 Choose the Encryption type, None or WEP using a or b, and press OK. 72.WLAN Encryption Type? None Select ab or OK If you chose None, go to step t. If you chose WEP, go to step n. Choose the key option; KEY1, KEY2, KEY3, KEY4 using a or b, and press OK. 72.WLAN WEP key KEY1:xxxxxx...
Page 45 Enter the password and press OK. Go to step t. (To manually enter the text, see Entering Text on page 225.) 72.WLAN PASS: Enter & OK Key To apply the settings, choose Yes. To cancel, choose No. 72.WLAN Apply Settings? 1.Yes 2.No Select ab or OK...
Page 46: Using The Ses/Wps Or Aoss™ Control Panel Menu To Configure Your Machine For A Wireless Network (Automatic Wireless Mode)
If your wireless access point/router supports either SecureEasySetup™, Wi-Fi Protected Setup (PBC AOSS™, you can configure the machine easily without knowing your wireless network settings. Your Brother machine has the SES/WPS/AOSS™ menu on the control panel. This feature automatically detects which mode your access point uses, SecureEasySetup™, Wi-Fi Protected Setup or AOSS™.
Page 47 The machine will search for an access point that supports SecureEasySetup™, Wi-Fi Protected Setup or AOSS™ for 2 minutes. 72.WLAN 3.SES/WPS/AOSS Setting WLAN Put your access point in the SecureEasySetup™ mode, Wi-Fi Protected Setup mode or AOSS™ mode, depending on what is supported by your access point. Please refer to the instruction manual that came with your access point.
Page 48 LCD messages when using the SES/WPS/AOSS™ control panel menu LCD shows Connection status Searching or accessing the access point, and downloading settings from the Setting WLAN access point Connecting SES Connecting the access point Connecting WPS Connecting AOSS Connection succeeded. Connected Session overlap has been detected.
Page 49: Using The Pin Method Of Wi-Fi Protected Setup
Using the PIN Method of Wi-Fi Protected Setup If your wireless access point/router supports Wi-Fi Protected Setup (PIN Method), you can configure the machine easily without a computer. The PIN (Personal Identification Number) Method is one of the connection methods developed by the Wi-Fi Alliance (your machine) to the Registrar (a device that manages the wireless LAN), you can setup the wireless network and security settings.
Page 50: Using The Brother Installer Application On The Cd-Rom To Configure Your Machine For A Wireless Network
For installation, see Wireless configuration for Windows MFC-8890DW) in Chapter 4 and Wireless configuration for Macintosh using the Brother installer application (For MFC-8890DW) in Chapter 5. Configuring your machine for a wireless network (For MFC-8890DW) ®...
Page 51: Wireless Configuration For Windows ® Using The Brother Installer Application
• The following instructions will install your Brother machine in a network environment using the Brother installer application for Windows • You can also setup your Brother machine using the machine’s control panel which we recommended. You can find instructions in the supplied Quick Setup Guide or see Configuring your machine for a wireless network (For MFC-8890DW) on page 21.
Page 52 Wireless configuration for Windows WPA/WPA2-PSK is a Wi-Fi Protected Access Pre-Shared Key, which lets the Brother wireless machine associate with access points using TKIP or AES encryption (WPA-Personal). WPA2-PSK (AES) and WPA-PSK (TKIP/AES) uses a Pre-Shared Key (PSK) that is 8 or more characters in length, up to a maximum of 63 characters.
Page 53: Configure The Wireless Settings
The CD-ROM main menu will appear. Click Initial Installation. Note If this window does not appear, use Windows of the Brother CD-ROM. Click Wireless LAN Setup Wizard. ® using the Brother installer application (For MFC-8890DW) ® Explorer to run the Start.exe program from the root folder...
Page 54 Wireless configuration for Windows Choose Step by Step install (Recommended) and then click Next. Choose With cable (Recommended) and then click Next. ® using the Brother installer application (For MFC-8890DW)
Page 55 Wireless configuration for Windows Connect the Brother wireless device to your access point using a network cable and click Next. Choose the machine you wish to configure, and click Next. If the list is blank, check if the access point and the machine are powered on, and then click Refresh.
Page 56 Follow the on-screen instructions for entering the Name(SSID), and then click Next. If your network is not configured for Authentication and Encryption, the following screen will appear. To continue configuration, click OK and go to step m. ® using the Brother installer application (For MFC-8890DW)
Page 57 If your network is configured for Authentication and Encryption, the following screen will appear. When configuring your Brother wireless machine, you must configure your machine to match the Authentication and Encryption settings you wrote down on page 41 for your existing wireless network.
Page 58 • If you want to manually enter the IP address settings of your machine, click Change IP Address and enter the necessary IP address settings for your network. • The control panel settings will be automatically changed to WLAN when the wireless settings are sent to your machine. ® using the Brother installer application (For MFC-8890DW)
Page 59 Reset the print server back to its factory default settings. (See Restoring the network settings to factory default on pages 123) Confirm the security settings of your wireless network and try starting from step e again. ® using the Brother installer application (For MFC-8890DW)
Page 60 Check the box after you confirm that you have completed the wireless settings, and then click Finish. You have completed the wireless network setup. If you would like to continue installing drivers and software necessary for operating your device, please choose Install MFL-Pro Suite from the CD-ROM menu. ® using the Brother installer application (For MFC-8890DW)
Page 61: Configuration Using The Ses/Wps Or Aoss™ From The Control Panel Menu (Automatic Wireless Mode)
Before configuring the wireless settings IMPORTANT • If you are going to connect your Brother machine to your network, we recommend that you contact your system administrator prior to installation. You must know your wireless network settings before you proceed with this installation.
Page 62 The CD-ROM main menu will appear. Click Initial Installation. Note If this window does not appear, use Windows of the Brother CD-ROM. Click Wireless LAN Setup Wizard. ® using the Brother installer application (For MFC-8890DW) ® Explorer to run the Start.exe program from the root folder...
Page 63 Please refer to the instruction manual that came with your access point. You will see Connecting AOSS, Connecting SES or Connecting WPS on the LCD while the machine searches your access point. ® using the Brother installer application (For MFC-8890DW)
Page 64 The access point detection failed. No Access Point Connection failed. Connection Fail ® using the Brother installer application (For MFC-8890DW) Connection status Check that only one router or access point has the SecureEasySetup™ mode, the Wi-Fi Protected Setup mode or AOSS™ mode enabled and try starting from step i again.
Page 65 Check the box after you confirm that you have completed the wireless settings, and then click Finish. You have completed the wireless network setup. If you would like to continue installing drivers and software necessary for operating your device, please choose Install MFL-Pro Suite from the CD-ROM menu. ® using the Brother installer application (For MFC-8890DW)
Page 66: Configuration In Ad-Hoc Mode
• The following instructions will install your Brother machine in a network environment using the Brother installer application for Windows • You can also setup your Brother machine using the machine’s control panel which we recommended. See Configuring your machine for a wireless network (For MFC-8890DW) on page 21.
Page 67 The CD-ROM main menu will appear. Click Initial Installation. Note If this window does not appear, use Windows of the Brother CD-ROM. Click Wireless LAN Setup Wizard. ® using the Brother installer application (For MFC-8890DW) ® Explorer to run the Start.exe program from the root folder...
Page 68 Choose Step by Step install (Recommended) and then click Next. Choose Without cable (Advanced) and then click Next. Read the Important Notice. Check the box after you confirm the wireless setting is enabled, and then click Next. ® using the Brother installer application (For MFC-8890DW)
Page 69 Communication Mode Authentication method Ad-hoc Open system ® using the Brother installer application (For MFC-8890DW) Encryption mode NONE Uses 5 text characters e.g. “Hello” (this is case sensitive) Uses 10 digits of hexadecimal data e.g. “71f2234aba” Uses 13 text characters e.g.
Page 70 ® Wireless configuration for Windows using the Brother installer application (For MFC-8890DW) To communicate with the un-configured wireless machine, temporarily change the wireless settings on your computer to match the machine’s default settings shown on this screen. Check the box after you...
Page 71 Check the Wireless Network Connection status. It may take a few minutes to change from 0.0.0.0 to 169.254.x.x IP address to be shown on screen (where x.x. are numbers between 1 and 254). ® using the Brother installer application (For MFC-8890DW)
Page 72 • The default Node name is “BRWxxxxxxxxxxxx”. (“xxxxxxxxxxxx” is your machine’s MAC Address / Ethernet Address.) • You can find your machine’s MAC Address / Ethernet Address by printing out the Network Configuration List. See Printing the Network Configuration List on page 123. ® using the Brother installer application (For MFC-8890DW)
Page 73 Name(SSID) and the Channel number, and then click Next. If your network is not configured for Authentication and Encryption, the following screen will appear. To continue configuration, click OK and go to step p. ® using the Brother installer application (For MFC-8890DW)
Page 74 If your network is configured for Authentication and Encryption, the following screen will appear. When configuring your Brother wireless machine, you must configure your machine to match the Authentication and Encryption settings you wrote down on page59 for your existing wireless network.
Page 75 Cancel. The Network Configuration page will be printed. Note If you want to manually enter the IP address settings of your machine, click Change IP Address and enter the necessary IP address settings for your network. ® using the Brother installer application (For MFC-8890DW)
Page 76 Reset the print server back to its factory default settings. (See Restoring the network settings to factory default on pages 123) Confirm the security settings of your wireless network and try starting from step f again. ® using the Brother installer application (For MFC-8890DW)
Page 77 Check the box after you confirm that you have completed the wireless settings, and then click Finish. You have completed the wireless network setup. If you would like to continue installing drivers and software necessary for operating your device, please choose Install MFL-Pro Suite from the CD-ROM menu. ® using the Brother installer application (For MFC-8890DW)
Page 78: Wireless Configuration For Macintosh Using The Brother Installer Application (For Mfc-8890Dw)
Macintosh found on the CD-ROM we have provided with the machine. • You can also setup your Brother machine using the machine’s control panel which we recommended. You can find instructions in the supplied Quick Setup Guide or see Configuring your machine for a wireless network (For MFC-8890DW) on page 21.
Page 79 Wireless configuration for Macintosh using the Brother installer application (For MFC-8890DW) WPA/WPA2-PSK is a Wi-Fi Protected Access Pre-Shared Key, which lets the Brother wireless machine associate with access points using TKIP or AES encryption (WPA-Personal). WPA2-PSK (AES) and WPA-PSK (TKIP/AES) uses a Pre-Shared Key (PSK) that is 8 or more characters in length, up to a maximum of 63 characters.
Page 80: Configure The Wireless Settings
Wireless configuration for Macintosh using the Brother installer application (For MFC-8890DW) Configure the wireless settings Plug the machine’s power cord into the AC power outlet. Turn on the machine’s power switch. Turn on your Macintosh. Put the supplied CD-ROM into your CD-ROM drive. Double-click the MFL-Pro Suite icon on your desktop.
Page 81 Wireless configuration for Macintosh using the Brother installer application (For MFC-8890DW) Choose Step by Step install (Recommended) and then click Next. Choose With cable (Recommended) and then click Next. Connect the Brother wireless device to your access point using a network cable and click Next.
Page 82 Wireless configuration for Macintosh using the Brother installer application (For MFC-8890DW) Choose the machine you wish to configure, and click Next. If the list is blank, check if the access point and the printer are powered on, and then click Refresh.
Page 83 Wireless configuration for Macintosh using the Brother installer application (For MFC-8890DW) Note • "SETUP" is the default SSID of the machine. Do not choose this SSID. • If the list is blank, check that the access point has power and is broadcasting the SSID, and then see if the machine and the access point are within range for wireless communication.
Page 84 If your network is configured for Authentication and Encryption, the following screen will appear. When configuring your Brother wireless machine, you must configure your machine to match the Authentication and Encryption settings you wrote down on page 68 for your existing wireless network.
Page 85 Wireless configuration for Macintosh using the Brother installer application (For MFC-8890DW) Click Next. The settings will be sent to your machine. The settings will remain unchanged if you click Cancel. The Network Configuration page will be printed. Note • If you want to manually enter the IP address settings of your machine, click Change IP Address and enter the necessary IP address settings for your network.
Page 86 Wireless configuration for Macintosh using the Brother installer application (For MFC-8890DW) Check the printed Network Configuration page. Choose the status as it is shown in the Wireless Link Status on the Network Configuration page. Click Next. If your status is "Link OK.", go to step p.
Page 87 Wireless configuration for Macintosh using the Brother installer application (For MFC-8890DW) Disconnect the network cable between your access point (hub or router) and the machine, and click Next. Check the box after you confirm that you have completed the wireless settings, and then click Finish.
Page 88: Configuration Using The Ses/Wps Or Aoss™ From The Control Panel Menu (Automatic Wireless Mode)
(Automatic Wireless mode) IMPORTANT • If you are going to connect your Brother machine to your network, we recommend that you contact your system administrator prior to installation. • If you have previously configured the wireless settings of the machine, you must reset the network LAN settings before you can configure the wireless settings again.
Page 89 Wireless configuration for Macintosh using the Brother installer application (For MFC-8890DW) Double-click the Wireless Device Setup Wizard. Choose Automatic install (Advanced) and click Next. Confirm the on-screen message and click Next.
Page 90 Wireless configuration for Macintosh using the Brother installer application (For MFC-8890DW) Press Menu, 7, 2, 3 for SES/WPS/AOSS. This feature will automatically detect which mode (SecureEasySetup™, Wi-Fi Protected Setup or AOSS™) your access point uses to configure your machine. Note...
Page 91 Wireless configuration for Macintosh using the Brother installer application (For MFC-8890DW) LCD messages when using the SES/WPS/AOSS™ control panel menu LCD shows Searching or accessing the access point, and downloading settings from the Setting WLAN access point Connecting SES Connecting the access point...
Page 92 Wireless configuration for Macintosh using the Brother installer application (For MFC-8890DW) Check the box after you confirm that you have completed the wireless settings, and then click Finish. You have completed the wireless network setup. If you would like to continue installing drivers and software necessary for operating your device, please choose Start Here OSX from the CD- ROM menu.
Page 93: Configuration In Ad-Hoc Mode
Macintosh found on the CD-ROM we have provided with the machine. • You can also setup your Brother machine using the machine’s control panel which we recommended. See Configuring your machine for a wireless network (For MFC-8890DW) on page 21.
Page 94 Wireless configuration for Macintosh using the Brother installer application (For MFC-8890DW) Double-click the Utilities icon. Double-click the Wireless Device Setup Wizard. Choose Step by Step install (Recommended) and then click Next.
Page 95 Wireless configuration for Macintosh using the Brother installer application (For MFC-8890DW) Choose Without cable (Advanced) and then click Next. Read the Important Notice. Check the box after you confirm the wireless setting is enabled, and then click Next.
Page 96 Wireless configuration for Macintosh using the Brother installer application (For MFC-8890DW) You need to temporarily change your computer’s wireless settings. Follow the on-screen instructions. Make sure you take notes on all the settings such as SSID, channel, authentication and encryption of your computer.
Page 97 Wireless configuration for Macintosh using the Brother installer application (For MFC-8890DW) To communicate with the un-configured wireless machine, temporarily change the wireless settings on your computer to match the machine’s default settings shown on this screen. Check the box after you confirm these settings, and then click Next.
Page 98 Wireless configuration for Macintosh using the Brother installer application (For MFC-8890DW) The wizard will search for wireless networks available from your machine. Choose the Ad-hoc network you wish to associate the printer with, and then click Next. Note • If the list is blank, check if the machine is within range for wireless communication. Then, click Refresh.
Page 99 If your network is configured for Authentication and Encryption, the following screen will appear. When configuring your Brother wireless machine, you must configure your machine to match the Authentication and Encryption settings you wrote down on page 86 for your existing wireless network.
Page 100 Wireless configuration for Macintosh using the Brother installer application (For MFC-8890DW) Click Next. The settings will be sent to your machine. The settings will remain unchanged if you click Cancel. The Network Configuration page will be printed. Note If you want to manually enter the IP address settings of your machine, click Change IP Address and enter...
Page 101 Wireless configuration for Macintosh using the Brother installer application (For MFC-8890DW) Check the printed Network Configuration page. Choose the status as it is shown for the Wireless Link Status on the Network Configuration page. Click Next. If your status is "Link OK.", go to step s.
Page 102 Wireless configuration for Macintosh using the Brother installer application (For MFC-8890DW) To communicate with the configured wireless device, you must configure your computer to use the same wireless settings. Manually change the wireless settings on your computer to match the machine’s wireless settings shown on this screen.
Page 103: Control Panel Setup
The Network menu selections of the control panel allow you to set up the Brother machine for your network configuration. Press Menu, then press a or b to choose Network. Proceed to the menu selection you wish to configure.
Page 104 In this mode the machine’s IP address must be manually assigned. Once entered the IP address is locked to the assigned address. RARP mode The Brother print server’s IP address can be configured using the Reverse ARP (RARP) facility on your host computer. (For more information on RARP, see Using RARP to configure the IP address on page 203.) BOOTP mode BOOTP is an alternative to RARP that has the advantage of allowing configuration of the subnet mask and gateway.
Page 105 IP address for the network the unit will be connected on. Press Menu. Press a or b to choose Network. Press OK. (DCP-8080DN, DCP-8085DN, MFC-8480DN, MFC-8680DN and MFC-8880DN) Go to step d. (MFC-8890DW) Go to step c. (MFC-8890DW only) (For Wired) Press a or b to choose Wired LAN.
Page 106 Check with your network administrator if you are unsure. Press Menu. Press a or b to choose Network. Press OK. (DCP-8080DN, DCP-8085DN, MFC-8480DN, MFC-8680DN and MFC-8880DN) Go to step d. (MFC-8890DW) Go to step c. (MFC-8890DW only) (For Wired) Press a or b to choose Wired LAN.
Page 107 You can register the machine name on the Network. This name is often referred to as a NetBIOS name; it will be the name that is registered by the WINS server on your network. Brother recommends the name “BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a wireless network. (“xxxxxxxxxxxx” is your machine’s MAC Address / Ethernet Address.)
Page 108 Press Menu. Press a or b to choose Network. Press OK. (DCP-8080DN, DCP-8085DN, MFC-8480DN, MFC-8680DN and MFC-8880DN) Go to step d. (MFC-8890DW) Go to step c. (MFC-8890DW only) (For Wired) Press a or b to choose Wired LAN.
Page 109 DNS server, but no secondary DNS server, simply leave this field blank. Press Menu. Press a or b to choose Network. Press OK. (DCP-8080DN, DCP-8085DN, MFC-8480DN, MFC-8680DN and MFC-8880DN) Go to step d. (MFC-8890DW) Go to step c. (MFC-8890DW only) (For Wired) Press a or b to choose Wired LAN.
Page 110 IP address through the Boot Method you have set. Press Menu. Press a or b to choose Network. Press OK. (DCP-8080DN, DCP-8085DN, MFC-8480DN, MFC-8680DN and MFC-8880DN) Go to step d. (MFC-8890DW) Go to step c. (MFC-8890DW only) (For Wired) Press a or b to choose Wired LAN.
Page 111: Ethernet (Wired Network Only)
Press a or b to choose IPv6. Press OK. Press a or b to choose On or Off. Press OK. Press Stop/Exit. Note • If you set IPv6 to On, turn off the power switch and then turn it back on to enable this protocol. •...
Page 112: Ses/Wps Or Aoss™ (Mfc-8890Dw Wireless Network Only)
If your wireless access point supports either SecureEasySetup™, Wi-Fi Protected Setup (PBC (one-push method), you can configure the machine easily without a computer. Your Brother machine has the SES/WPS/AOSS™ menu on the control panel. This feature automatically detects which mode your access point uses, SecureEasySetup™, Wi-Fi Protected Setup or AOSS™.
Page 113 Signal This field displays the current wireless network signal strength; Strong, Medium, Weak or None. Press Menu. Press a or b to choose Network. Press OK. Press a or b to choose WLAN. Press OK. Press a or b to choose WLAN Status. Press OK.
Page 114: Set To Default (Mfc-8890Dw Only)
Comm.Mode This field displays the current wireless network communication mode; Ad-hoc or Infrastructure. Press Menu. Press a or b to choose Network. Press OK. Press a or b to choose WLAN. Press OK. Press a or b to choose WLAN Status. Press OK.
Page 115: Wired Enable (Mfc-8890Dw Wired Network Only)
Wired Enable (MFC-8890DW wired network only) If you want to use the wired network connection, set Wired Enable to On. Press Menu. Press a or b to choose Network. Press OK. Press a or b to choose Wired LAN. Press OK. Press a or b to choose Wired Enable.
Page 116: E-Mail / Ifax (Mfc-8880Dn And Mfc-8890Dw Only)
E-mail / IFAX (MFC-8880DN and MFC-8890DW only) This menu has five selections: Mail Address, Setup Server, Setup Mail RX, Setup Mail TX and Setup Relay. As this section requires you to enter a lot of text characters, you may find that it is more convenient to use Web Based Management and your favorite web browser to configure these settings.
Page 117 Press a or b to choose Name? or IP Address?. Press OK. Enter the SMTP server address (up to 64 characters). Press OK. Press Stop/Exit. SMTP Port This field displays the SMTP port number (for outgoing E-mails) on your network. Press Menu.
Page 118 POP3 Server This field displays the node name or IP address of the POP3 server (incoming E-mail server) used by the Brother machine. This address is necessary for the Internet fax features to function correctly. (Ex, “mailhost.brothermail.net” or “192.000.000.001”) Press Menu.
Page 119 Press a or b to choose Setup Server. Press OK. Press a or b to choose Mailbox Name. Press OK. Enter the user account name assigned to the Brother machine that will login to the POP3 server (up to 60 characters). Press OK. Press Stop/Exit.
Page 120 Mailbox Pwd You can specify the password for the POP3 server account where the internet print jobs are to be retrieved. Press Menu. Press a or b to choose Network. Press OK. Press a or b to choose E-mail/IFAX. Press OK. Press a or b to choose Setup Server.
Page 121 Setup Mail RX Auto Polling When set to On, the machine automatically checks the POP3 server for new messages. Press Menu. Press a or b to choose Network. Press OK. Press a or b to choose E-mail/IFAX. Press OK. Press a or b to choose Setup Mail RX. Press OK.
Page 122 Header This selection allows the contents of the mail header to be printed when the received message is printed. Press Menu. Press a or b to choose Network. Press OK. Press a or b to choose E-mail/IFAX. Press OK. Press a or b to choose Setup Mail RX. Press OK.
Page 123 Press Stop/Exit. Setup Mail TX Sender Subject This field displays the subject that is attached to the Internet fax data being sent from the Brother machine to a computer (default is “Internet Fax Job”). Press Menu. Press a or b to choose Network.
Page 124 Size Limit Some E-mail servers do not allow you to send large E-mail documents (the System Administrator will often place a limit on the maximum E-mail size). With this function enabled, the machine will display Out of Memory when trying to send E-mail documents over 1 Mbyte in size. The document will not be sent and an error report will be printed.
Page 125 Setup Relay Rly Broadcast This function allows the machine to receive a document over the Internet, and then relay it to other fax machines through conventional analog landlines. Press Menu. Press a or b to choose Network. Press OK. Press a or b to choose E-mail/IFAX. Press OK.
Page 126 Relay Report A Relay Broadcast Report can be printed at the machine that will act as a Relay Station for all Relay Broadcasts. Its primary function is to print reports of any relayed broadcasts that have been sent through the machine. Please note: In order to use this function, you must assign the relay domain in the “Trusted Domains”...
Page 127: How To Set A New Default For Scan To E-Mail (E-Mail Server) (Mfc-8880Dn And Mfc-8890Dw Only)
How to set a new default for Scan to E-mail (E-mail server) (MFC-8880DN and MFC-8890DW only) You can choose the default color file type for the Scan to E-mail (E-mail server) function. (For the details on how to operate Scan to E-mail (E-mail server), see Internet fax and Scan to E-mail (E-mail server) (For MFC-8880DN and MFC-8890DW) on page 154.) Press Menu.
Page 128: How To Set A New Default For Scan To Ftp
How to set a new default for Scan to FTP You can choose the default color file type for the Scan to FTP function. Press Menu. Press a or b to choose Network. Press OK. Press a or b to choose Scan to FTP. Press OK.
Page 129: How To Set A New Default For Scan To Network
How to set a new default for Scan to Network You can choose the default color and file type for the Scan to Network function to scan a document directly to a server supporting CIFS on your local network or on the internet. (For the CIFS protocol, see Protocols on page 8.) Press Menu.
Page 130: Fax To Server (For Mfc-8880Dn And Mfc-8890Dw)
Fax to Server (For MFC-8880DN and MFC-8890DW) The Fax to Server feature allows the machine to scan a document and send it over the network to a separate fax server. The document will then be sent from the server as fax data to the destination fax number over standard phone lines.
Page 131 Enter the suffix using dial pad. Press OK. Press Stop/Exit. Note You can enter the prefix and suffix address using up to a total of 40 characters. How to operate Fax to Server Place the document in the ADF or on the scanner glass. Enter the fax number.
Page 132: Time Zone
Time Zone This field displays your country time zone. The time shown is the time difference between your country and Greenwich Mean Time. For example, the Time Zone for Eastern Time in the USA and Canada is UTC-05:00. Press Menu. Press a or b to choose Network.
Page 133: Restoring The Network Settings To Factory Default
Restoring the network settings to factory default If you wish to reset the print server back to its default factory settings (resetting all information such as the password and IP address information), please follow these steps: Note This function restores all wired and wireless network settings to the factory default. Press Menu.
Page 134: Driver Deployment Wizard
Driver Deployment Wizard (Windows Overview The Driver Deployment Wizard software can be used to ease the installation or even automate the installation of a locally connected or network connected printer. The Driver Deployment Wizard can also be used to create self running executable files which when run on a remote PC, completely automates the installation of a printer driver.
Page 135: Network Shared
Network Shared The device is connected to a network and a central print queue is used to manage all print jobs. 1 Client computer 2 Also known as “Server” or “Print Server” 3 TCP/IP, USB or parallel 4 Printer (your machine) How to install the Driver Deployment Wizard software Put the supplied CD-ROM into your CD-ROM drive.
Page 136: Using The Driver Deployment Wizard Software
Choose your connection type to the machine that you want to print to. Choose the option you require, and follow the on-screen instructions. If you choose Brother Peer-to-Peer Network Printer, the following screen is displayed. Setting the IP Address If the printer does not have an IP address, the Wizard will allow you to change the IP address by selecting the printer from the list and by selecting the Configure IP option.
Page 137 Choose the printer driver if you wish to install. If the printer driver you wish to use is installed on your computer: Check the box of Currently installed drivers and choose the printer you wish to install, and then click Next. If the driver you wish to use is not installed on your computer: 1 Click Have Disk...
Page 138 • Copy the Driver files to this PC and create an installation program for other users. Choose this option if you wish to install the driver onto your computer and also create a self-running executable file for use with another computer using the same operating system as your own. •...
Page 139: Network Printing From Windows
By using this application, you can easily connect your machine to your network and install the network software and printer driver which you need to complete the configuration of your printer for a network. You will be guided by the on-screen instructions until you are able to use your Brother network machine. ®...
Page 140: Configuring The Standard Tcp/Ip Port
Click Printer Driver Only (for Network). Click Next in response to the Welcome message. Follow the on-screen instructions. Choose Standard Installation and click Next. Choose Brother Peer-to-Peer Network Printer, and then click Next. Follow the on-screen instruction, and then click Next. Note Contact your administrator if you are not sure about the location and name of the printer on the network.
Page 141: Printer Driver Already Installed
Printer driver already installed If you have already installed the printer driver and wish to configure it for network printing, follow these steps: ® (Windows Vista Click the button, Control Panel, Hardware and Sound, and then Printers. ® (Windows Server 2008) Click the Start button, Control Panel, Hardware and Sound, and then Printers.
Page 142: Internet Printing For Windows
• Verify the host computer and machine are either on the same subnet, or that the router is properly configured to pass data between the two devices. • The default password for Brother print servers is “access”. • This print server also supports the IPPS printing. (See Printing documents securely using IPPS on page 170.)
Page 143 If your printer is not in the list of supported printers, click Have Disk. You will then be asked to insert the driver disk. Click Browse and choose the appropriate Brother printer driver that is contained on the CD-ROM or in the network share. Click Open.
Page 144: Windows ® 2000/Xp And Windows Server ® 2003
To test the printer connection, click Print a test page, and then click Finish. The printer is now configured and ready to print. ® Windows 2000/XP and Windows Server ® (Windows XP and Windows Server Click the Start button and choose Printers and Faxes. ®...
Page 145 ® (Windows 2000) Click OK when you see the Insert Disk screen. Click Browse and choose the appropriate Brother printer driver that is contained on the CD-ROM or in the network share. For example, choose the “X:\\driver\win2kxpvista letter). Click Open.
Page 146: Specifying A Different Url
Specifying a different URL Please note that there are several possible entries that you can enter for the URL field. http://printer’s IP address:631/ipp This is the default URL and we recommend that you use this URL. http://printer’s IP address:631/ipp/port1 This is for HP Jetdirect compatibility. http://printer’s IP address:631/ Note If you forget the URL details, you can simply enter the above text (http://printer’s IP address/)
Page 147: Network Printing From Macintosh Using The Br-Script 3 Driver
Network using Mac OS X 10.3.9 or greater. IMPORTANT For the latest drivers and information on the Mac OS X you are using, visit the Brother Solutions Center at: http://solutions.brother.com/. How to choose the BR-Script 3 printer driver (TCP/IP) For Mac OS X 10.3.9 to 10.4.x users...
Page 148 Macintosh. (“xxxxxxxxxxxx” is your machine’s MAC Address / Ethernet Address.) From the Printer Model (Print Using) pull-down list choose your model. For example, choose Brother MFC-XXXX BR-Script3. (Mac OS X 10.3.9) Click Add and the printer will be available from the Printer List. The machine is now ready to print.
Page 149: For Mac Os X 10.5.X
For Mac OS X 10.5.x Turn the power of the machine ON. From the Apple menu, choose System Preferences. Click Print & Fax. Click + button to add your machine. Choose IP. Choose Line Printer Daemon-LPD from the Protocol list. Enter the IP address of the printer into the Address box.
Page 150: Other Sources Of Information
From the Print Using pop-up menu choose Select a driver to use, and then from the printer model scrolling list choose your model. For example, choose Brother MFC-XXXX BR-Script3, and then click Add. From the Default Printer pop-up menu choose your model to set as the default printer. The printer is now ready.
Page 151: Web Based Management
Web Based Management Overview A standard Web Browser can be used to manage your machine using the HTTP (Hyper Text Transfer Protocol). You can get the following information from a machine on your network using a web browser. Printer status information Change Fax configuration items, such as General Setup, Quick-Dial settings and Remote Fax Change network settings such as TCP/IP information.
Page 152: How To Configure The Machine Settings Using Web Based Management (Web Browser)
How to configure the machine settings using Web Based Management (web browser) A standard web browser can be used to change your print server settings using the HTTP (Hyper Text Transfer Protocol). Note • We recommend to use HTTPS protocol for your internet security when configuring the settings using Web Based Management.
Page 153: Password Information
Web Based Management Password information Web Based Management offers two levels of password access. Users are able to access to the General Setup, Fax Settings, I-Fax Settings (MFC-8880DN and MFC-8890DW only), Copy Settings, Printer Settings and USB Direct I/F. The default user name for User is “user” (case sensitive) and the default password is “access”.
Page 154: Secure Function Lock 2.0
Secure Function Lock 2.0 Secure Function Lock 2.0 from Brother helps you to save money and increase security by restricting the functions available on your Brother machine. Secure Function Lock allows you to configure passwords for selected users, granting them access to some, or all, of these functions, or limiting them to a page limit.
Page 155: How To Configure The Secure Function Lock 2.0 Settings Using Web Based Management (Web Browser)
How to configure the Secure Function Lock 2.0 settings using Web Based Management (web browser) Basic configuration Click Administrator Settings on the MFC-XXXX (or DCP-XXXX) web page, and then click Secure Function Lock. Choose On from Function Lock. Note To configure Secure Function Lock through the embedded web server, you have to enter the Administrator Password (four digit number).
Page 156 If you want to restrict the PC printing by PC login user name, click PC Print Restriction by Login Name and configure the settings. (See Restricting PC print by PC user login name on page 146.) Scanning when using Secure Function Lock 2.0 The Secure Function Lock 2.0 feature allows the administrator to restrict which users are allowed to scan.
Page 157 • Secure Function Lock 2.0 can be configured using BRAdmin Professional 3; this is available as a download from http://solutions.brother.com/. This utility is only available for Windows • The configuration you have set on the control panel for Secure Function Lock is applied to the Web Based Management settings automatically.
Page 158: Changing The Scan To Ftp Configuration Using A Web Browser
Changing the Scan to FTP configuration using a web browser Scan to FTP allows you to scan a document directly to an FTP server on your local network or on the Internet. (See Chapter 4 in the Software User’s Guide for more details on Scan to FTP.) Click Administrator Settings on the MFC-XXXX (or DCP-XXXX) web page, and then click FTP/Network Scan Settings.
Page 159 Click FTP/Network Scan Profile on Administrator Settings page. Now you can configure and change the following Scan to FTP settings using a web browser. Profile Name (Up to 15 characters) Host Address (FTP server address) Username Password Store Directory File Name Quality File Type Passive Mode...
Page 160: Changing The Scan To Network Configuration Using A Web Browser
Changing the Scan to Network configuration using a web browser Scan to Network allows you to scan documents directly to a shared folder on a CIFS server located on your local network or the Internet. (For more information on CIFS protocol, see Protocols on page 8.) To enable the CIFS protocol, check the box for CIFS from the Network Configuration page.
Page 161 Click FTP/Network Scan Profile on Administrator Settings page. Now you can configure and change the following Scan to Network settings using a web browser. Profile Name (Up to 15 characters) Host Address Store Directory File Name Quality File Type Use PIN for authentication PIN Code Auth.
Page 162: Changing The Ldap Configuration Using A Web Browser (For Mfc-8880Dn And Mfc-8890Dw)
Changing the LDAP configuration using a web browser (For MFC-8880DN and MFC-8890DW) You can configure and change the LDAP settings using a web browser. Click Network Configuration on the MFC-XXXX web page, and then click Configure Protocol. Make sure that the check box for LDAP is on and then click Advanced Settings.
Page 163: Ldap Operation (For Mfc-8880Dn And Mfc-8890Dw)
Load your document and press Start. Note • The LDAP function of this machine supports LDAPv3. • You need to use Kerberos Authentication or Simple Authentication to communicate with your LDAP server. • SSL/TLS is not supported. • For more information, visit us at http://solutions.brother.com/.
Page 164: Internet Fax And Scan To E-Mail (E-Mail Server) (For Mfc-8880Dn And Mfc-8890Dw)
E-mail address for your machine, the mail server(s) IP address, mailbox name and password for your Brother machine. If you are unsure of any of these items, please contact your systems Administrator. (For details of how to configure this information, see Web Based Management on page 141.)
Page 165: Control Panel Key Functions
Control panel key functions Shift + 1 Used to change input mode. You can use dial pad keys as Standard alphabet character keys. Dial Pad Used to enter Standard Alpha characters (26 letters), as well as @. space ! “ # % & ’ () + / : ; < > = ? [ ] ^ - $ , l _ and Numbers.
Page 166: Manually Entering Text
Manually entering text Press Shift and 1 simultaneously to change into the “alphabet” dialing mode. You can use the Dial Pad to enter the E-mail address. For more information, see Entering Text on page 225. Please note that also you can connect to the machine using a web browser and store the E-mail address information to a Speed Dial or One Touch location through Web Based Management.
Page 167: Receiving An Internet Fax To Your Computer
Please see the User’s Guide included with the machine to check that this feature is supported. Relay broadcasting This function allows the Brother machine to receive a document over the Internet, and then relay it to other fax machines through conventional telephone lines.
Page 168 Relay broadcast from a machine FAX@brother.com In this example, your machine has an E-mail address of FAX@brother.com, you wish to send a document from this machine to another machine in England with an E-mail address of UKFAX@brother.co.uk, this machine will then forward the document to a standard fax machine using a conventional telephone line. If your E-mail address is FAX@brother.com, you must configure a trusted domain name of brother.com on the...
Page 169 If you want to have the document relayed to more than one standard fax machine the address can be entered using the following method: Enter the phone number of the first Fax machine UKFAX@brother.co.uk(fax#123). Press OK. Enter the phone number of the second Fax machine UKFAX@brother.co.uk(fax#456).
Page 170: Tx Verification Mail
TX Verification Mail Transmission Verification Mail supports two separate functions. Verification Mail for sending allows you to request notification from the receiving station that the Internet Fax or E-mail was received and processed. Verification Mail for receiving allows you to transmit a default report back to the sending station after successfully receiving and processing an Internet Fax or E-mail.
Page 171: Important Information On Internet Fax
Important information on Internet fax Internet fax communication on a LAN system is basically the same as communication via E-mail; however, it is different from fax communication using standard phone lines. The following is important information for using Internet fax: Factors such as the receiver’s location, structure of the LAN system, and how busy the circuit (such as the internet) is, may cause the system to take a long time to send back an error mail.
Page 172: Scan To E-Mail (E-Mail Server) Overview
Scan to E-mail (E-mail server) overview When you choose Scan to E-mail (E-mail Server) you can scan a black and white or color document and send it directly to an E-mail address from the machine. You can choose PDF or TIFF for Black and White and PDF or JPEG for color.
Page 173: Using One Touch Or Speed Dial Number
Using One Touch or Speed Dial number You can also scan a document directly to an address you registered in a One Touch or Speed Dial number. When you scan the document, the settings you registered with the One Touch or Speed Dial will be used for the quality and the file type.
Page 174: Security Features
Security features Overview In today’s world there are many security threats to your network and the data that travels over it. Your Brother machine employs some of the latest network security and encryption protocols available today. These network features can be integrated into your overall network security plan to help protect your data and prevent unauthorized access to the machine.
Page 175: Security Protocols
Security methods for E-mail notification The Brother print server supports the following security methods for E-mail notification. Note How to configure the settings of security methods, see Using Web Based Management (web browser) to change the print/scan server settings on page 20.
Page 176: Configuring The Protocol Settings
Configuring the protocol settings You can enable or disable each protocol and security method using Web Based Management (web browser). Note ® We recommend Microsoft Internet Explorer Safari 1.3 for Macintosh. Please also make sure that JavaScript and Cookies are always enabled in whichever browser you use.
Page 177: Managing Your Network Printer Securely
Managing your network printer securely To manage your network printer securely, you need to use the management utilities with security protocols. Secure Management using Web Based Management (web browser) We recommend to use HTTPS and SNMPv3 protocol for secure management. To use the HTTPS protocol, the following printer settings are required.
Page 178 You can now access the printer using HTTPS. We recommend secure management (SNMPv3) be used along with the HTTPS protocol. If you use the SNMPv3 protocol, follow the steps below. Note You can also change the SNMP settings by using BRAdmin Professional 3 or Web BRAdmin. Click Network Configuration.
Page 179: Secure Management Using Bradmin Professional 3 (Windows )
SNMPv1/v2c read-write access In this mode the print server uses version 1 and version 2c of the SNMP protocol. You can use all Brother applications under this mode. However, it is not secure since it will not authenticate the user and the data will not be encrypted.
Page 180: Printing Documents Securely Using Ipps
Printing documents securely using IPPS To print documents securely over the internet, you can use the IPPS protocol. Note • Communication using IPPS cannot prevent unauthorized access to the print server. ® • IPPS is available for Windows To use the IPPS protocol, the following printer settings are required. A certificate and private key must be installed in the printer.
Page 181: Using E-Mail Notification With User Authentication (For Mfc-8880Dn And Mfc-8890Dw)
Using E-mail notification with user authentication (For MFC-8880DN and MFC-8890DW) To use the E-mail notification function via secure SMTP server that requires a user authentication, you need to use POP before SMTP or SMTP-AUTH method. These methods prevent an unauthorized user from accessing the mail server.
Page 182 You can configure the POP3/SMTP settings on this page. Note • You can also change the SMTP port number using Web Based Management. This is useful if your ISP (Internet Service Provider) implements the “Outbound Port 25 Blocking (OP25B)” service. By changing the SMTP port number to a specific number which your ISP is using for the SMTP server (for example, port 587), you would then be able to send an E-mail via the SMTP server.
Page 183: Creating And Installing A Certificate
Creating and installing a certificate The Brother print server allows you to use SSL/TLS communication by configuring a certificate and corresponding private key. This print server supports two certification methods. A self-signed certificate and a certificate that is issued by a CA (Certificate Authority).
Page 184 Note • If you have edited the hosts file on your computer or are using a Domain Name System, you can also enter the DNS name of the print server. ® • For Windows users, as the print server supports TCP/IP and NetBIOS names, you can also enter the NetBIOS name of the print server.
Page 185: Creating And Installing A Self-Signed Certificate
Creating and installing a self-signed certificate How to create and install a self-signed certificate Click Create Self-Signed Certificate on the Configure Certificate page. Enter a Common Name and a Valid Date, then click Submit. Note • The length of the Common Name is less than 64 bytes. Enter an identifier such as an IP address, node name or domain name to use when accessing this printer through SSL/TLS communication.
Page 186 How to install the self-signed certificate on your computer Note The following steps are for Microsoft text of the web browser itself. ® For Windows Vista users that have administrator rights Click the button and All Programs. Right-click Internet Explorer, and then click Run as administrator. Click Allow.
Page 187 Type “https://printer’s IP address/” into your browser to access your printer (where “printer’s IP address” is the printer’s IP address or the node name). Then, click Continue to this website (not recommended). Click Certificate Error, and then click View certificates. For the rest of the instructions, follow the steps from step d in For Windows ®...
Page 188 ® For Windows Vista users that do not have administrator rights Click the button and All Programs. Right click Internet Explorer, and then click Run as administrator. Choose the Administrator that you want to install with and enter the administrator password, and then click OK.
Page 189 Type “https://printer’s IP address/” into your browser to access your printer (where “printer’s IP address” is the printer’s IP address or the node name). Then, click Continue to this website (not recommended). Click Certificate Error, and then click View certificates. XXXX Security features...
Page 190 Choose the Details tab, and then click Copy to File... Click Next. Make sure that DER encoded binary X.509 (.CER) is chosen, and then click Next. Security features...
Page 191 Click Browse... Click Browse Folders. Choose a folder you want to save the certificate file in and enter a file name, and then click Save. Note If you choose Desktop, the certificate file is saved to the Desktop of the Administrator that you chose. Security features...
Page 192 Click Next. Click Finish. Click OK. Security features...
Page 193 Click OK. Open the folder that you saved the certificate file in step k and double-click the certificate file. For the rest of the instructions, follow the steps from step d in For Windows 2003/2008 users on page 183. ® For Windows 2000/XP and Windows Server Start your web browser.
Page 194 When the following dialog appears, click View Certificate. Click Install Certificate... from the General tab. Security features...
Page 195 When the Certificate Import Wizard appears, click Next. Choose Place all certificates in the following store and then, click Browse... Choose Trusted Root Certification Authorities and then, click OK. Security features...
Page 196 Click Next. Click Finish. Click Yes, if the fingerprint (thumbprint) is correct. Security features...
Page 197 Note The fingerprint (thumbprint) is printed on the Network Configuration List. (To learn how to print the Network Configuration List, see Printing the Network Configuration List on page 123.) Click OK. Now the self-signed certificate is installed on your computer, and the SSL/TLS communication is available.
Page 198: Creating Csr And Installing A Certificate
• Follow your CA policy regarding the method to send a CSR to your CA. • If you are using Enterprise root CA of Windows Server Web Server Certificate Template when creating the certificate. For more information, visit us at http://solutions.brother.com/. ® 2003/2008, we recommend using the...
Page 199 How to install the certificate to your printer When you receive the certificate from a CA, follow the steps below to install it into the print server. Note Only a certificate issued with this printer’s CSR can be installed. Click Install Certificate on the Configure Certificate page. Specify the file of the certificate that has been issued by a CA, and then click Submit.
Page 200: Import And Export The Certificate And Private Key
Import and export the certificate and private key How to import the certificate and private key Click Import Certificate and Private Key on the Configure Certificate page. Specify the file that you want to import. Enter the password if the file is encrypted, and then click Submit. Now the certificate and private key are imported successfully.
Page 201: Troubleshooting
Overview This chapter explains how to resolve typical network problems you may encounter when using the machine. If, after reading this chapter, you are unable to resolve your problem, please visit the Brother Solutions Center at: http://solutions.brother.com/ This chapter is divided into the following sections:...
Page 202: Network Print Software Installation Problems
Macintosh Choose your machine again in the DeviceSelector application located in Mac OS X or Macintosh HD (Startup Disk) / Library / Printers / Brother / Utilities / DeviceSelector or from the model pop-up menu of ControlCenter2. Network print software installation problems...
Page 203 Check the connection status for your network. For wired network users: Check to see if there is any LED activity. Brother print servers have two LEDs on the back panel of the machine. The upper orange LED shows Speed status. The lower green LED shows Link/Activity (Received/Transmit) status.
Page 204: Printing Problems
Verify that the print server is on your network as follows: ® Windows Try pinging the print server from the host operating system command prompt with the command: Click Start, All Programs ® Programs for Windows 2000 users ping ipaddress Where ipaddress is the print server IP address (note that in some instances it can take up to two minutes for the print server to load its IP address after setting the IP address).
Page 205 Verify that the print server is on your network as follows: ® Windows Try pinging the print server from the host operating system command prompt with the command: ping ipaddress Where ipaddress is the print server IP address (note that in some instances it can take up to two minutes for the print server to load its IP address after setting the IP address).
Page 206: Scanning And Pc Fax Problems
To add port 137 for network scanning, network printing and network PC Fax receiving, enter the information below: 1. In Description of service: Enter any description, for example, “Brother PC Fax receiving”. 2. In Name or IP address (for example 192.168.0.12) or the computer hosting this service on your network: Enter “Localhost”.
Page 207 Make sure if the new setting is added and is checked, and then click OK. Note After the Brother software package is installed, turn your Firewall back on. ® Windows Vista users: Click the button, Control Panel, Network and Internet, Windows Firewall and click Change settings.
Page 208: Wireless Network Troubleshooting (Mfc-8890Dw Only)
The Brother print server is not found during setup by the Wireless Device Setup Wizard. Make sure that the machine is powered on, is on-line and ready to print. Move your Brother machine closer to your access point/router (or your computer for Ad-hoc) and try again.
Page 209: Wireless Connection Problem
Wireless connection problem The wireless network connection is sometimes disabled. The wireless network connection status is affected by the environment where the Brother printer and other wireless devices are located. The following conditions may cause connection problems: A concrete or metal framed wall is installed between the Brother machine and the access point/router.
Page 210: Protocol-Specific Troubleshooting
This will then force Windows 2000/XP, Windows Vista communicate with the Brother print server. Web Based Management (web browser) troubleshooting (TCP/IP) If you cannot connect to the print server using your web browser it may be worth checking the Proxy Settings of your browser.
Page 211: A Appendix A
Appendix A Using services A service is a resource that can be accessed by computers that wish to print to the Brother print server. The Brother print server provides the following predefined services (do a SHOW SERVICE command in the Brother print server remote console to see a list of available services): Enter HELP at the command prompt for a list of supported commands.
Page 212: Using Bootp To Configure The Ip Address
Using BOOTP to configure the IP address BOOTP is an alternative to RARP that has the advantage of allowing configuration of the subnet mask and gateway. In order to use BOOTP to configure the IP address make sure that BOOTP is installed and running on your host computer (it should appear in the /etc/services file on your host as a real service;...
Page 213: Using Rarp To Configure The Ip Address
For AT&T UNIX-based systems, type: ps -ef | grep -v grep | grep rarpd The Brother print server will get the IP address from the RARP daemon when the printer is powered on. Using APIPA to configure the IP address The Brother print server supports the Automatic Private IP Addressing (APIPA) protocol.
Page 214: Using Arp To Configure The Ip Address
If your administrator has configured the system to deliver IP addresses using BOOTP, DHCP or RARP your Brother print server can receive an IP address from any one of these IP address allocation systems. In which case, you will not need to use the ARP command. The ARP command only works once. For security reasons, once you have successfully configured the IP address of a Brother print server using the ARP command, you cannot use the ARP command again to change the address.
Page 215: Using The Telnet Console To Configure The Ip Address
Appendix A Using the TELNET console to configure the IP address You can also use the TELNET command to change the IP address. TELNET is an effective method to change the machine’s IP address. But a valid IP address must already be programmed into the print server.
Page 216: Using The Brother Web Bradmin Server Software For Iis To Configure The Ip Address
Java. Please note this software is not included on the CD-ROM that was supplied with your Brother product. Please visit http://solutions.brother.com/ to learn more about this software and to download it.
Page 217: Installation When Using Web Services (Windows Vista )
The machine’s Web Services Name will be shown with the printer icon. Right-click the machine you want to install. Note The Web Services Name for the Brother machine is your model name and the MAC Address (Ethernet Address) of your machine (e.g. Brother MFC-XXXX (model name) [XXXXXX] (MAC Address / Ethernet Address).
Page 218: Installation When Using A Network Print Queue Or Share (Printer Driver Only)
Installation when using a Network Print Queue or Share (printer driver only) Note If you are going to connect to a shared printer on your network, we recommend that you ask your system administrator about the queue or share name for the printer prior to installation. Start the CD-ROM installation menu program according to the Quick Setup Guide.
Page 219: B Appendix B
For the latest driver updates, visit http://solutions.brother.com/ For MFC-8880DN only BRAdmin Professional and Web BRAdmin are available as a download from http://solutions.brother.com/. They are for Windows Client computers with a web browser supporting Java. Available when using BRAdmin Professional 3 or Web BRAdmin with devices that are connected to your client PC via the USB or parallel interface.
Page 220: Wireless Network
Wireless network Network board NC-7600w type2 model name You can connect your machine to a network for Network Printing, Network Scanning, PC Fax and Remote Setup Support for ® Windows 2000 Professional, Windows ® Windows XP Professional x64 Edition, Windows Vista and Windows Server Mac OS X 10.3.9 or greater Protocols...
Page 221 2003/2008 For the latest driver updates, visit http://solutions.brother.com/ BRAdmin Professional and Web BRAdmin are available as a download from http://solutions.brother.com/. They are for Windows Client computers with a web browser supporting Java. Available when using BRAdmin Professional 3 or Web BRAdmin with devices that are connected to your client PC via a USB or parallel port.
Page 222: Function Table And Default Factory Settings
Function table and default factory settings DCP-8080DN, DCP-8085DN, MFC-8480DN and MFC-8680DN The factory settings are shown in Bold with an asterisk. Main menu Submenu 5.Network 1.TCP/IP (DCP-8080DN DCP-8085DN) 7.Network (MFC-8480DN MFC-8680DN) Menu selections Options 1.Boot Method Auto* Static RARP BOOTP...
Page 223 Main menu Submenu 5.Network 1.TCP/IP (DCP-8080DN (continued) DCP-8085DN) 7.Network (MFC-8480DN MFC-8680DN) (continued) 2.Ethernet 3.Scan to FTP — Menu selections Options 0.IPv6 Off* — Auto* 100B-FD 100B-HD 10B-FD 10B-HD Color 100 dpi* Color 200 dpi Color 300 dpi Color 600 dpi...
Page 224 4.ScanTo Network — 5.Network (DCP-8080DN DCP-8085DN) 7.Network (MFC-8480DN MFC-8680DN) (continued) 7.Time Zone — 0.Network Reset 1.Reset On connection to the network, the machine will automatically set the IP address and Subnet Mask to values appropriate for your network. Menu selections...
Page 225: Mfc-8880Dn
MFC-8880DN The factory settings are shown in Bold with an asterisk. Main menu Submenu 7.Network 1.TCP/IP Menu selections Options 1.Boot Method Auto* Static RARP BOOTP DHCP (If you choose Auto, RARP, BOOTP or DHCP, you will be asked to enter how many times the machine tries to obtain the IP address.) 2.IP Address [000-255].[000-255].[000-255].[000-255]...
Page 226: Menu Selections
Main menu Submenu Menu selections — 7.Network 2.Ethernet (continued) 3.E-mail/IFAX 1.Mail Address 2.Setup Server 3.Setup Mail RX 1.Auto Polling Options Auto* 100B-FD 100B-HD 10B-FD 10B-HD Name (up to 60 characters) Name? (Up to 64 characters) 1.SMTP Server IP Address? [000-255].[000-255].[000-255].[000-255] 2.SMTP Port 00025* [00001-65535]...
Page 227 Main menu Submenu Menu selections 7.Network 3.E-mail/IFAX 3.Setup Mail RX (continued) (continued) (continued) 4.Setup Mail TX 1.Sender Subject 5.Setup Relay 4.Scan to E-mail — Options 5.Notification Off* (Up to 40 characters) 2.Size Limit Off* 3.Notification Off* 1.Rly Broadcast Off* 2.Relay Domain RelayXX: Relay(01 - 10) 3.Relay Report...
Page 228 Main menu Submenu 5.Scan to FTP — 7.Network (continued) 6.ScanTo Network — 7.Fax to Server — 8.Time Zone — 0.Network Reset 1.Reset On connection to the network, the machine will automatically set the IP address and Subnet Mask to values appropriate for your network. Menu selections Options Color 100 dpi*...
Page 229: Mfc-8890Dw
MFC-8890DW The factory settings are shown in Bold with an asterisk. Main Menu Submenu Menu Selections 7.Network 1.Wired LAN 1.TCP/IP Options 1.Boot Method Auto* Static RARP BOOTP DHCP (If you choose Auto, RARP, BOOTP or DHCP, you will be asked to enter how many times the machine tries to obtain the IP address.) 2.IP Address...
Page 230 Main Menu Submenu Menu Selections 7.Network 1.Wired LAN 1.TCP/IP (continued) (continued) (continued) 2.Ethernet 3.Set to Default 4.Wired Enable 2.WLAN 1.TCP/IP Options (Primary) 8.DNS Server [000-255].[000-255].[000-255].[000-255] [000].[000].[000].[000]* (Secondary) [000-255].[000-255].[000-255].[000-255] [000].[000].[000].[000]* 9.APIPA 0.IPv6 Off* — Auto* 100B-FD 100B-HD 10B-FD 10B-HD — 1.Reset —...
Page 231 Main Menu Submenu Menu Selections 7.Network 2.WLAN 1.TCP/IP (continued) (continued) (continued) 2.Setup Wizard 3.SES/WPS/AOSS 4.WPS w/PIN Code 5.WLAN Status Options 4.Gateway [000-255].[000-255].[000-255].[000-255] [000].[000].[000].[000]* 5.Node Name BRWxxxxxxxxxxxx (up to 32 characters) 6.WINS Config Auto* Static (Primary) 7.WINS Server [000-255].[000-255].[000-255].[000-255] [000].[000].[000].[000]* (Secondary) [000-255].[000-255].[000-255].[000-255] [000].[000].[000].[000]* (Primary)
Page 232 Main Menu Submenu Menu Selections 7.Network 2.WLAN 5.WLAN Status (continued) (continued) (continued) 6.Set to Default 7.WLAN Enable 3.E-mail/IFAX 1.Mail Address 2.Setup Server 3.Setup Mail RX Options 2.Signal Strong Medium Weak None — 3.SSID 4.Comm. Mode Ad-hoc Infrastructure — 1.Reset — 2.Exit —...
Page 233 Main Menu Submenu Menu Selections 7.Network 3.E-mail/IFAX 3.Setup Mail RX (continued) (continued) (continued) 4.Setup Mail TX 5.Setup Relay 4.Scan to E-mail — Options 2.Poll Frequency 10Min* (01Min to 60Min) 3.Header Subject+From+To None* 4.Del Error Mail 5.Notification Off* (Up to 40 characters) 1.Sender Subject 2.Size Limit Off*...
Page 234 Main Menu Submenu Menu Selections 5.Scan to FTP — 7.Network (continued) 6.ScanTo Network — 7.Fax to Server — 8.Time Zone — 0.Network Reset 1.Reset 2.Exit On connection to the network, the machine will automatically set the IP address and Subnet Mask to values appropriate for your network. Options (If you choose Color option) Color 100 dpi*...
Page 235: Entering Text
Entering Text When setting certain menu selections, such as the E-mail address, you will need to type text characters. The dial pad keys have letters printed on them. The keys: 0, # and l do not have printed letters because they are used for special characters.
Page 236 Repeating letters To enter a character on the same key as the previous character, press c to move the cursor right before pressing the key again. Special characters and symbols Press l, # or 0, and then press d or c to move the cursor to the symbol or character you want. Press OK to choose it.
Page 237: C Appendix C
Appendix C Open Source Licensing Remarks Part of the software embedded in this product is gSOAP software. Portions created by gSOAP are Copyright (C) 2001 2004 Robert A. van Engelen, Genivia inc. All Rights Reserved. THE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDED BY GENIVIA INC AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
Page 238: Mit Kerberos Statements
MIT Kerberos statements MIT Kerberos license copyright Version 1.6.3 Copyright (C) 1985-2007 by the Massachusetts Institute of Technology. All rights reserved. Export of this software from the United States of America may require a specific license from the United States Government. It is the responsibility of any person or organization contemplating export to obtain such a license before exporting.
Page 239 Appendix C Copyright 2000 by Zero-Knowledge Systems, Inc. Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted without fee, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of Zero- Knowledge Systems, Inc.
Page 240 Appendix C ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. COPYRIGHT (C) 2006-2007 THE REGENTS OF THE UNIVERSITY OF MICHIGAN ALL RIGHTS RESERVED.
Page 241: Cyrus Sasl Statements
Cyrus SASL statements The Cyrus SASL License Copyright (c) 1998-2003 Carnegie Mellon University. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Page 242: Openssl Statements
OpenSSL statements OpenSSL License Copyright © 1998-2005 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Page 243 Appendix C Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used.
Page 244: Openldap Statements
OpenLDAP Statements This product includes software developed by the OpenLDAP Project. Unless otherwise expressly stated herein, The OpenLDAP Public License Version 2.8 shall be applied to individual files. Copyright 1998-2007 The OpenLDAP Foundation All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted only as authorized by the OpenLDAP Public License.
Page 245 Appendix C The OpenLDAP Foundation may revise this license from time to time. Each revision is distinguished by a version number. You may use this Software under terms of this license revision or under the terms of any subsequent revision of the license. THIS SOFTWARE IS PROVIDED BY THE OPENLDAP FOUNDATION AND ITS CONTRIBUTORS “AS IS”...
Page 246 Appendix C 3. The name "OpenLDAP" must not be used to endorse or promote products derived from this Software without prior written permission of the OpenLDAP Foundation. For written permission, please contact foundation@openldap.org. 4. Products derived from this Software may not be called "OpenLDAP" nor may "OpenLDAP" appear in their names without prior written permission of the OpenLDAP Foundation.
Page 247 BOOTP ... 8 BRAdmin Light ...1 BRAdmin Professional ... 1 BRNxxxxxx ... 201 BRNxxxxxx_AT ... 201 Brother accessories and supplies ...iv Brother installer application ...28 Brother Solutions Center ...15 CA ...164 Certificate ...164 Channels ... 22 CIFS ... 10 CKIP ... 23 Control panel ...
Page 248 Open Source Licensing Remarks ... 227 Open system ... 22 Operating systems ... 1 Password ... 132 PBC ... 28 PCL_P1 ... 201 Peer-to-Peer ... 5 PIN Method ... 29 Ping ...194 POP before SMTP ...165 POSTSCRIPT_P1 ... 201 Print server setting ... 18 private key ...

This manual is also suitable for:

Dcp 8080dn - b/w laser - all-in-one Dcp-8085dn Mfc 8890dw - b/w laser - all-in-one Mfc-8480dn Dcp 8080d Mfc-8890dw

Brother MFC-8680DN Network User's Manual

1 Introduction

2 Configuring Your Machine for a Network

3 Configuring Your Machine for a Wireless Network (for MFC-8890DW)

4 Wireless Configuration for Windows ® Using the Brother Installer Application

(For MFC-8890DW)

5 Wireless Configuration for Macintosh Using the Brother Installer Application (for MFC-8890DW)

6 Control Panel Setup

7 Driver Deployment Wizard

8 Network Printing from Windows

9 Internet Printing for Windows

10 Network Printing from Macintosh Using the BR-Script 3 Driver

11 Web Based Management

12 LDAP Operation (for MFC-8880DN and MFC-8890DW)

13 Internet Fax and Scan to E-Mail (E-Mail Server) (for MFC-8880DN and MFC-8890DW)

14 Security Features

15 Troubleshooting

100 C Appendix C

Quick Links

Troubleshooting

Related Manuals for Brother MFC-8680DN

Summary of Contents for Brother MFC-8680DN

This manual is also suitable for:

Table of Contents