Advertisement
Quick Links
thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly
maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/
OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE kEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
1.1 Safety Instructions
WARNING! Ensure Health & Safety, local authority and
general workshop practice regulations are adhered to
when using this tool.
DO NOT use the suction cup if any parts are damaged or
missing as this may cause failure and/or personal injury.
Before each use, check condition of suction cup. Examine
rubber pads for excessive glaze, cuts or roughness. If any
component is worn or damaged replace immediately.
DO NOT clean the suction cup with solvents or other
harsh chemicals.
Use genuine parts only. Unauthorised parts may be
dangerous and will invalidate the warranty.
Use in a suitable work area. Keep area free from
unrelated materials and ensure that there is adequate
lighting.
WARNING! Always wear approved eye, face and hand
protection when using the suction cup.
Remove ill fitting clothing. Remove ties, watches, rings,
other loose jewellery and contain and/or tie back long hair.
Maintain correct balance and footing. DO NOT over reach,
ensure the floor is not slippery, wear non-slip footwear.
Keep children and unauthorised persons away from the
working area.
Ensure workpiece is secure before attaching and using
the suction cup.
WARNING! Ensure that the surface to which the suction
cup is to be attached is non-pourous, clean, dry and free
from oil and grease.
DO NOT exceed the maximum pull capacity of the suction
cup.
DO NOT use the suction cup for any purpose other than
that for which it is designed.
DO NOT use the suction cup when you are tired or under
the influence of alcohol, drugs or intoxicating medication.
When not in use, store in a safe, dry, childproof location.
DO NOT use any sharp object to loosen the suction
cup as it may damage the rubber and prevent the tool
from creating suction.
DO NOT attempt to attach the suction cup to a person as
severe bruising and/or damage to internal organs can
occur.
DO NOT allow anything to interfere with the free
movement of the plunger whilst the suction cup is
attached to a surface.
Keep fingers clear of suction release tag during use.
DO NOT allow anything else to touch the release tab
whilst in the process of lifting e.g. other lifting gear or
adjacent fixtures and fittings.
2. INTRODUCTION & SPECIFICATION
Model No:
Size:
40kg (horizontal)
Maximum Lift Capacity:
© Jack Sealey limited 2012
Ak98941
Ak98942
Ø178mm
Ø178mm
40kg (horizontal)
Original Language Version
InStRUctIonS foR:
VACUUM SUCTION CUPS - 40kg
Ak98941 & Ak98942
ModEl no's:
Ak98941 is a rubber suction device with a red line indicator
which warns of any vacuum loss. Easy attachment on smooth,
non-porous FLAT SURFACES such as glass, sheet metal and
tiles.
Ak98942 is a profiled rubber suction cup suitable for
attachment to CURVED SURFACES such as windscreens.
Red line indicator warns of any vacuum loss. can also be used
on smooth, non-porous flat surfaces such as glass, sheet metal
and tiles.
AK98941, AK98942
Issue: 1 - 23/07/12
Advertisement
Related Manuals for Sealey AK98941
Summary of Contents for Sealey AK98941
- Page 1 Ak98941 & Ak98942 ModEl no's: thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to www.sealey.co.uk, email sales@sealey.co.uk or phone 01284 757500. NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.