Related Manuals for ABB M2231
Summary of Contents for ABB M2231
- Page 1 2TMD041600D0107 │ 16.10.2020 Product manual ABB-Welcome M2231.-. 4.3" video hands-free indoor station...
-
Page 2: Table Of Contents
Inha ltsv erzeichnis Notes on the instruction manual ......................4 Safety ..............................4 Intended use ............................4 Environment ............................5 ABB devices ..........................5 Product description ..........................6 Control elements........................6 Terminal description ........................8 Technical data ............................9 Mounting/Installation ........................... 10 Requirement for the electrician .................... - Page 3 Inhaltsverzeichnis Incoming call ........................... 42 Intercom ..........................44 Call guard unit ......................... 45 Broadcast ..........................46 Control switch actuator ......................47 Notice ..............................48 │3 Product manual 2TMD041600D0107...
-
Page 4: Notes On The Instruction Manual
Please keep this manual in a safe place. If you pass the device on, also pass on this manual along with it. ABB accepts no liability for any failure to observe the instructions in this manual. Safety... -
Page 5: Environment
ABB devices All packaging materials and devices from ABB bear the markings and test seals for proper disposal. Always dispose of the packing materials and electric devices and their components via an authorized collection facility or disposal company. -
Page 6: Product Description
Product description Product description Control elements Description 4.3" Color display Communication button ■ When an incoming call, press this button to initiate a communication, press this button again to end the call. ■ In standby status, press this button to initiate an intercom, call guard unit or release the switch actuator. - Page 7 Product description Description Mute button ■ In standby status, press this button to mute the ringtone of this indoor station. ■ In standby status, hold this button to mute the ringtone of all indoor stations in the same apartment. ■ When an incoming call, press this button to reject the call.
-
Page 8: Terminal Description
Product description Terminal description 1 - 9 0 2 4 Description Station Select switch to set the address of the default outdoor station. X10 X1 Selector switches to set the address (tens and units digits) of the indoor station. X200 X100 Dip switches to set the address (hundreds digits) of the indoor station. -
Page 9: Technical Data
Technical data Technical data Designation Value Display resolution 480 x 272 Display size 4.3" Operating temperature -10 °C…+55 °C Storage temperature -40 °C…+70 °C Protection IP 30 Single-wire clamps 2 x 0.28 mm² - 2 x 0.75 mm² Fine-wire clamps 2 x 0.28 mm²... -
Page 10: Mounting/Installation
Mounting/Installation Mounting/Installation Warning Electric voltage! Dangerous currents flow through the body when coming into direct or indirect contact with live components. This can result in electric shock, burns or even death. – Disconnect the mains power supply prior to installation and/or disassembly! –... -
Page 11: General Installation Instructions
Mounting/Installation General installation instructions ■ Terminate all branches of the wiring system via a connected bus device (e.g., indoor station, outdoor station, system device). ■ Do not install the system controller directly next to the bell transformer and other power supplies (to avoid interference). -
Page 12: Mounting
Mounting/Installation Mounting 7.3.1 Installation height 1.50 m (4.9 feet) 7.3.2 Dismantling │12 Product manual 2TMD041600D0107... -
Page 13: Surface-Mounted Installation
Mounting/Installation 7.3.3 Surface-mounted installation Surface-mounted box (unit: mm) Installation 1. Mounted on the wall │13 Product manual 2TMD041600D0107... - Page 14 Mounting/Installation 2. Mounted with flush-mounted box │14 Product manual 2TMD041600D0107...
-
Page 15: Flush-Mounted Installation
Mounting/Installation 7.3.4 Flush-mounted installation 1 Dismantling the frame 2A Mounting with the back cover directly 2B Mounting with the metal flush-mounted box │15 Product manual 2TMD041600D0107... - Page 16 Mounting/Installation 3 Latch the upper part │16 Product manual 2TMD041600D0107...
-
Page 17: Cavity Wall Installation
Mounting/Installation 7.3.5 Cavity wall installation 7.3.6 Desktop installation │17 Product manual 2TMD041600D0107... -
Page 18: Replace The Front Cover
Mounting/Installation 7.3.7 Replace the front cover │18 Product manual 2TMD041600D0107... -
Page 19: Commissioning
Commissioning Commissioning Common operation Intercom 1 (001) Intercom 2 Add New Functions In normal status, press this button to select the previous item. In setting status, press this button to change the setting or scroll down the letter/number, hold the button to scroll down the letter/number quickly. In normal status, press this button to select the next item. -
Page 20: Intercom Settings
Commissioning Intercom settings Intercom 1 (001) Intercom 2 Add New INTERCOM Call Type External Intercom Target Address mike Rename Save Cancel Functions Display the existing intercoms. means an intercom between different apartments. means an intercom in the same apartment. Click to add a new intercom (maximum 32). Call type In setting status, press "+"... -
Page 21: Switch Actuator Settings
Commissioning Switch actuator settings SWITCH ACTUATOR Actuator 1 (001) Add New SWITCH ACTUATOR Target Address Rename light Save Cancel Description Display the existing switch actuators. Click it to add a new switch actuator (maximum 10). Target address In setting status, press "+" or "-" button to set the address of target switch actuator (001-199). In setting status, press "+"... -
Page 22: Program Button Settings
Commissioning Program button settings PROGRAM BUTTON Button 1 Release 2nd-lock Description Program button function In setting status, press "+" or "-" button to set the function for the program button, e.g. releasing second lock, calling guard unit, intercom call, releasing the existing switch actuator. │22 Product manual 2TMD041600D0107... -
Page 23: Call Forward Settings
Commissioning Call forward settings CALL FORWARD √ Call Forward Call Type Indoor Target Address Save Cancel Description In setting status, press "+" or "-" button to enable/disable the function. Call type In setting status, press "+" or "-" button to set the call type between "Indoor" and "Guard unit". Target address When the call type is set to "Indoor", in setting status, press "+"... -
Page 24: Auto Unlock Settings
Commissioning Auto unlock settings AUTO UNLOCK Auto Unlock √ √ Time 2 Time 1 ： ： ： ： Description In setting status, press "+" or "-" button to enable/disable the function. Time 1 function In setting status, press "+" or "-" button to enable/disable the function. Time 1 settings In setting status, press "+"... -
Page 25: Unlock Password Settings
Commissioning Unlock password settings SET OS PASSWORD √ Enable Password Enter Password 12345678 (3-8 digits) Description In setting status, press "+" or "-" button to enable/disable the function. Unlock password In setting status, press "+" or "-" button to set the password (3-8 digits). Note This function can only be set on the master indoor station. -
Page 26: Ringtone Settings
Commissioning Ringtone settings RING TONE Default Outdoor Ring Tone1 Other Outdoors Ring Tone2 Doorbell Ring Tone3 Others Ring Tone4 Description In setting status, press "+" or "-" button to select a ring tone for default outdoor station. In setting status, press "+" or "-" button to select a ring tone for other outdoor stations. In setting status, press "+"... -
Page 27: Volume Settings
Commissioning Volume settings VOLUME Ringtone Volume Volume 3 √ Touchbutton Tone √ Repeated Tone Description In setting status, press "+" or "-" button to set the volume. In setting status, press "+" or "-" button to enable/disable the function. In setting status, press "+" or "-" button to enable/disable the function. │27 Product manual 2TMD041600D0107... -
Page 28: Date And Time Settings
Commissioning 8.10 Date and time settings DATE AND TIME Date(YYYY-MM-DD) 2013 Time √ Summer Time Description In setting status, press "+" or "-" button to set the date. In setting status, press "+" or "-" button to set the time. In setting status, press "+"... -
Page 29: Other Settings
Commissioning 8.11 Other settings OTHER SETTINGS √ Auto Full Screen √ Door Status Check √ Auto-snapshots √ Missed Description In setting status, press "+" or "-" button to enable/disable the function. In setting status, press "+" or "-" button to enable/disable the function (a sensor should be connected to the outdoor station before use). -
Page 30: Blacklist Settings
Commissioning 8.12 Blacklist settings BLACKLIST Blacklist 1 (001) Add New BLACKLIST Target Address Cancel Save Description Display the existing blacklists. Click it to add a new blacklist (maximum 32). Target address In setting status, press "+" or "-" button to set the address of target indoor station (001-250). Save In normal status, press "√"... -
Page 31: History
Commissioning 8.13 History HISTORY 1/63 Outdoor-1 2013-03-21 16:45 2013-03-21 Outdoor-1 16:43 2013-03-21 Outdoor-1 14:24 1 / 2 Outdoor - 1 Description Call records are displayed on the screen. (Up to 100 records are supported). " " will be displayed if the "Auto-snapshots" function is enabled. means dialing a call means receiving a call means a missed call... -
Page 32: Camera List
Commissioning 8.14 Camera list By default, in standby status, when you repeatedly press " " button, you can view all images from the outdoor stations and the cameras. If you only want to view some images from them, you need to enable the "Camera list" function to edit your camera list. Enable the "Camera list"... - Page 33 Commissioning Edit the camera list 1. Remove the camera from the camera list CAMERA LIST Enable the cameras Outdoor1-1 Outdoor1-2 Camera1 Please follow the steps below: [1] In standby status, press " " button to access the communication screen. " on the left list and then press " √ " to access the [2] Press "...
- Page 34 Commissioning 2. Hide/unhide the camera from the camera list CAMERA LIST Enable the cameras Outdoor1-1 Outdoor1-2 Camera1 CAMERA LIST - Camera 1 √ Enable Rename Front door √ Visual Doorbell Save Cancel Please follow the steps below: [1] In standby status, press " "...
- Page 35 Commissioning 3. Rename the camera from the camera list CAMERA LIST Enable the cameras Outdoor1-1 Outdoor1-2 Camera1 CAMERA LIST - Camera 1 √ Enable Rename Front door √ Visual Doorbell Save Cancel Please follow the steps below: [1] In standby status, press " "...
- Page 36 Commissioning 4. Visual doorbell Overview In some case, there is no camera on the outdoor station. When the doorbell is pressed, you want the indoor station to display the image from the designated camera connected to the camera interface. Precondition The camera is connected to the camera interface.
- Page 37 Commissioning CAMERA LIST - Camera 1 √ Enable Rename Front door √ Visual Doorbell Save Cancel [4] Press " " to select "Visual Doorbell" and then press "+" or "-" button to enable the function. " to select "Save" and then press " √ " to save the settings. [5] Press "...
- Page 38 Commissioning 5. Find out the camera we removed before CAMERA LIST Disable the cameras Outdoor1-1 Outdoor1-2 Camera1 Please follow the steps below: [1] In standby status, press " " button to access the operation screen. [2] Press " " or " "...
-
Page 39: Language
Commissioning 8.15 Language LANGUAGE English Française Italiano Español Português │39 Product manual 2TMD041600D0107... -
Page 40: Information
Commissioning 8.16 Information INFORMATION Flash Version: V2.07_150629 MCU Version: V2.07_150723 Master M/S: Indoor St. Add.: Default Outdoor You can use your mobile to scan QR code to obtain the product manual on the website. │40 Product manual 2TMD041600D0107... -
Page 41: Restoring To Factory Default
Commissioning 8.17 Restoring to factory default RESET FACTORY DEFAULT Are you sure to reset? √ Reset All Settings √ Clear All Data Cancel Description Reset all settings: Reset all settings to factory default. But data like history records, existing intercoms and existing switch actuators will not be reset. -
Page 42: Operation
Operation Operation Incoming call 30 s Outdoor 1 Description During an incoming call, press this button to receive the incoming call. Press this button again during the conversation to end the call. Press this button to release the default lock on the default outdoor station. Press this button to initiate a surveillance. - Page 43 Operation Display and volume settings During an incoming call, hold " " button for 3 seconds to enter the display settings. 120 s Outdoor 1 Description In setting status, press "+" or "-" button to adjust the volume. Display the value of volume/saturation/brightness. In setting status, press "+"...
-
Page 44: Intercom
Operation Intercom INTERCOM Intercom 1 (001) Intercom 2 Please follow the steps below: [1] In standby status, press " " button to access the operation screen. [2] Press " " or " " to select " " on the left list. [3] Press "√"... -
Page 45: Call Guard Unit
Operation Call guard unit CALL GUARD UNIT Call Guard Unit Please follow the steps below: [1] In standby status, press " " button to access the operation screen. [2] Press " " or " " to select " " on the left list. [3] Press "√"... -
Page 46: Broadcast
Operation Broadcast BROADCAST √ Long-pressing " " button to broadcast Please follow the steps below: [1] In standby status, press " " button to access the operation screen. [2] Press " " or " " to select " " on the left list. [3] Hold "√"... -
Page 47: Control Switch Actuator
Operation Control switch actuator SWITCH ACTUATOR Actuator 1 (001) Please follow the steps below: [1] In standby status, press " " button to access the operation screen. [2] Press " " or " " to select " " on the left list. [3] Press "√"... -
Page 48: Notice
We reserve the right to at all times make technical changes as well as changes to the contents of this document without prior notice. The detailed specifications agreed to at the time of ordering apply to all orders. ABB accepts no responsibility for possible errors or incompleteness in this document. - Page 49 ABB Xiamen Smart Technology Co., Ltd. No.7, Fangshan South Road, Hi-tech area, Torch park, Xiang An District, Xiamen, China Tel: +86 592 295 9000 Fax: +86 592 562 5072 www.abb.com © Copyright 2020 ABB. All rights reserved. Specifications subject to change without notice.