Summary of Contents for Miele Segosoft SegoSerial Industrial Grade Converter
-
Page 1: Installation And Operation
Installation und Administration | Installation and administration 1 DE 1 EN Serial Industrial Converter 12/2017 Rev. 2.0... -
Page 2: Table Of Contents
Table of Contents Installation and operation............................. 1 1 Introduction................................3 2 Product features..............................4 3 Description of the connections and displays..................5 4 Installation of the device driver......................... 7 5 Establishing the connection......................... 7 6 Annex: Technical data............................8 It is essential that you read the instructions and observe all safety information before startup. -
Page 3: Introduction
1 Introduction Comcotec does not guarantee that information provided in this document is up to date, complete or accurate nor does Comcotec take responsibility for its quality. Liability claims against Comcotec relating to indirect or direct damage of a material or non-material nature and caused by the use or non-use of the information offered or by the use of incorrect and incomplete information are generally excluded, except in the event of demonstrable intentional or gross negligence on the part of Comcotec. -
Page 4: Product Features
2 Product features The SegoSerial Industrial Grade Converter is a specially designed dual serial-to-USB converter. It excels by virtue of the following features: ▯ Complete electrical isolation between USB and serial ports ▯ Complete electrical isolation of the two serial ports from one another ▯... -
Page 5: Description Of The Connections And Displays
3 Description of the connections and displays Connections and displays on the rear panel 1| Power LED This LED lights blue if the module is supplied with sufficient power, either via the mains power adapter and DC connection socket or via USB. 2| Power Fail-LED This LED lights red if the USB power supply falls below a critical value, so the correct function of the converter can no longer be guaranteed. - Page 6 6| USB Connect LED This LED lights blue if the converter has established a functional data connection with the computer. Connections and displays on the front panel 7| Port A Receive LED This LED lights yellow if the converter receives data via serial port A. 8| Port A Send LED This LED lights blue if the converter sends data via serial port A.
-
Page 7: Installation Of The Device Driver
4 Installation of the device driver Always ensure that the SegoSerial Converter is not connected to the computer while you perform the driver installation described here. After successful installation you can connect the converter to the computer. The SegoSerial Industrial Grade Converter will be detected automatically. 5 Establishing the connection Install the device driver first before connecting the SegoSerial Industrial Grade Converter to the PC! -
Page 8: Annex: Technical Data
6 Annex: Technical data Dimensions and weight: Heigh 33mm Length 91mm Width 109mm Weight 216g Electrical supply: 13-24V DC über DC connection socket Hollow coaxial plug, diameter 5.5 mm outside (-) and 2. 1 mm inside (+) ) alternative: 5V via USB High Power Connection (500mA) Current consumption maximum: 300mA bei 5V (USB powered) 130mA bei 15V (self powered) Ambient conditions:... - Page 9 This device must not be disposed of with unsorted household waste. Inappropriate disposal can have a harmful effect on the environment and health. Please follow your local authorities' instructions regarding return and collection procedures applicable to you. 9 | 9...
- Page 10 EU Declaration of Conformity Address: Comcotec Messtechnik GmbH Gutenbergstraße 3 85716 Unterschleißheim Product: Converter Model: SegoSerial Industrial Grade Converter Isolated Dual RS-232 to USB (Type-No.: 23391) The product is in compliance with the requirements of the following European directives: 2014/30/EU Electromagnetic Compatibility (EMC) 2014/35/EU Low Voltage Directive (LVD)
- Page 11 Tel. 001-800/843 72 31 Telefax 001-609/419 42 41 For further international contacts, please have a look at: www.miele-professional.com Comcotec, the Comcotec logo, SegoSoft, the SegoSoft logo are registered trademarks of Comcotec Messtechnik GmbH. All other product names are trademarks of...