Advertisement
Available languages
Available languages
Quick Links
MODEL 57999
MULTI-BRAND REMOTE CONTROL
This remote control can be programmed to activate
up to two products, such as a garage door opener,
gate operator, or commercial door operator. Each
button on the remote control works independently
of the other and must be programmed separately.
The images throughout this manual are for
reference only and your product may look different.
STOP
manufactured after 1993 that utilize photoelectric
sensors. The photoelectric sensors are always
located on or near the bottom of the door track.
To prevent possible SERIOUS INJURY or
DEATH from a moving gate or door:
• A LWAYS keep remote controls out of reach
of children. NEVER permit children to
operate, or play with remote control
transmitters.
• A ctivate gate or door ONLY when it can be
seen clearly, is properly adjusted and there
are no obstructions to door travel.
• A LWAYS keep gate or door in sight until
completely closed. NEVER permit anyone to
cross path of moving gate or door.
Read instructions thoroughly BEFORE
beginning. If using the Multi-Brand
Remote Control with residential door
openers, the remote control must be
used only with door openers
®
Advertisement
Related Manuals for Craftsman 57999
Summary of Contents for Craftsman 57999
- Page 1 ® MODEL 57999 MULTI-BRAND REMOTE CONTROL This remote control can be programmed to activate up to two products, such as a garage door opener, gate operator, or commercial door operator. Each button on the remote control works independently of the other and must be programmed separately.
-
Page 2: Getting Started
The following instructions are for a garage door opener with a Program/LEARN button. For DIP SWITCH programming instructions or additional help please go to www.sears.com and review the product page for the 57999 Craftsman Multi-Code remote control. Program/ LEARN Button DIP Switch... - Page 3 PROGRAMMING Remove the cover. Press and hold the program button until the LED turns on. Program Button Cover Press and release the Program/LEARN button on your garage door opener. Select a button to program. Press and release the button the specified number of times according to the chart on the following page. Make sure the LED stops flashing between each press of the button.
- Page 4 * NOTE: LiftMaster, Do-It, Master Mechanic, Raynor, True Value and Chamberlain are compatible with Sears Craftsman technology. ** NOTE: Please go to www.sears.com and review the product page for the 57999 Craftsman Multi-Code remote control. Press the program button on the remote control to save.
- Page 5 Test the remote control by pressing the button. If the garage door opener does not activate, repeat the programming steps or visit www.sears.com and review the product page for the 57999 Craftsman Multi-Code remote. BATTERY To prevent possible SERIOUS INJURY or DEATH: • N EVER allow small children near batteries.
- Page 6 NOTICE: To comply with FCC and or Industry Canada (IC) rules, adjustment or modifications of this receiver and/or transmitter are prohibited, except for changing the code setting or replacing the battery. THERE ARE NO OTHER USER SERVICEABLE PARTS. Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Page 7 ® MODELO 57999 CONTROL REMOTO MULTIMARCA Este control remoto puede programarse para activar hasta dos productos, tales como abre-puertas de garaje, operador de portones u operador de puertas comerciales. Cada botón en el control remoto funciona independientemente del otro y debe programarse por separado. Las imágenes en este...
-
Page 8: Pasos Iniciales
Para obtener las instrucciones o ayuda adicional acerca de la programación del INTERRUPTOR DIP visite www.sears.com y consulte la página del producto para el control remoto multicódigo 57999 de Craftsman. Botón LEARN o de programación Microselector... - Page 9 PROGRAMACIÓN Quitar la tapa. Oprima y mantenga oprimido el botón de programación hasta que se encienda el LED. Botón de programación Cubierta Oprima y suelte el botón SMART/LEARN en el abre-puerta de garaje. Elija el botón que será programado. Oprima y suelte el botón la cantidad de veces indicada en la tabla de la siguiente página. El LED debe dejar de parpadear después de cada vez que oprime el botón.
- Page 10 ’99 ® * NOTA: LiftMaster, Do-It, Master Mechanic, Raynor, True Value y Chamberlain son compatibles con la tecnología Craftsman de Sears. ** NOTA: Visite www.sears.com y consulte la página del producto para el control remoto multicódigo 57999 de Craftsman. Pulse el botón de programación del control remoto para guardar en memoria la programación.
- Page 11 Pulse el botón para probar el control remoto. Si el abre-puerta no se activara, repetir los pasos de programación o visite www.sears.com y consulte la página del producto para el control remoto multicódigo 57999 de Craftsman. BATERÍA ADVERTENCIA ADVERTENCIA Para evitar una LESIÓN GRAVE O INCLUSO LA MUERTE: • N UNCA permita la presencia de niños cerca...
- Page 12 AVISO: Para cumplir con las reglas de la FCC y/o Canadá (IC), se prohíben los ajustes o modificaciones de este receptor y/o transmisor, excepto para cambiar el código establecido o para cambiar la batería. NO HAY OTROS COMPONENTES QUE NECESITEN INTERVENCIÓN DEL USUARIO. Se ha probado para cumplir con las normas de la FCC para USO EN EL HOGAR O LA OFICINA. El uso está sujeto a las siguientes condiciones: (1) Este dispositivo no debe causar interferencia perjudicial, y (2) este dispositivo debe poder recibir interferencia, incluso interferencia que pueda afectar su funcionamiento. Todos los nombres comerciales utilizados en este documento son marcas registradas de los fabricantes respectivos.