hit counter script

Inspection - Honeywell NORTH 7600 Series Operating And Maintenance Instruction Manual

Full facepiece
Table of Contents

Advertisement

Available languages

Available languages

the manufacturer.
Refer to the User's Instructions and/or maintenance manuals for information on use and maintenance of these
O
respirators.
P
NIOSH does not evaluate respirators for use as surgical masks.
S1
Honeywell N-Series gas and vapor cartridges manufactured after August 2012 require the use of a spider
(P/N N750038) when a pad style filter is used with the cartridge.
S2
If the air-purifying cartridges have an ESLI, you must be able to see the indicator without moving the facepiece in any
way that could break the facepiece-to-face seal.

INSPECTION

Each and every time you put on your respirator and prior to storage, you must inspect all components for wear or damage.
1)
Check the nose cup and sealing area for any tears, holes or other damage.
2)
Check the inhalation and exhalation valves to assure they are not missing or damaged.
3)
Pull gently on the head straps to assure they are not worn. Check the head strap buckles for any damage.
4)
Check the lens for any cracks or other damage.
5)
Check the cartridge connectors to assure they are seated properly and are not cracked.
If any components are missing or damaged, do not use this respirator until all damaged and missing components are replaced with
new or unused/undamaged NIOSH approved Honeywell replacement parts
Failure to comply with these warnings will result in the risk of serious injury, illness or death.
WARNING
7

Advertisement

Table of Contents
loading

Table of Contents