Table of Contents
Advertisement
Available languages
Available languages
INTRODUCTION
The 7600 Series is comprised of full facepiece masks that are one component of a complete respirator. Components of these
respirators are sold separately. Only those components manufactured by Honeywell and listed on the approval label may be
used. These User Instructions refer only to the use and maintenance of this full facepiece, and to the assembly and use of this
full facepiece as part of an air-purifying respirator. This respirator should only be used and maintained by individuals who have
completely read and understand the instructions contained within this Instruction Manual and any other Operating and
Maintenance Instruction Manuals included with the other components of a complete respirator. For more information and a
complete listing of approved components refer to the Honeywell web site www.honeywellsafety.com.
Before occupational use of this respirator, a written respiratory protection program must be implemented meeting all
the local government requirements. In the United States, employers must comply with OSHA 29 CFR 1910.134 which
includes medical evaluation, training, and fit-testing.
NIOSH CERTIFICATIONS
When components listed on the NIOSH Approval Label are used, these respirators are approved as part of air-purifying, powered
air-purifying or supplied air respirators. Refer to the User Instructions of those components (e.g. Compact Air PAPR) and the NIOSH
approval labels supplied with these products for a listing of all components that must be used to assemble a complete NIOSH
approved respirator. When used as air-purifying respirators the 7600 Series is for protection from hazardous gases, vapors and/or
particulates where the concentration does not exceed 50 times the Permissible Exposure Limit (PEL); is below the contaminant's
Immediately Dangerous to Life or Health (IDLH) threshold; and there is sufficient oxygen according to the OSHA or CSA
requirements. This respirator offers nuisance level relief from organic vapors, acid gases, and ozone that are below the Permissible
Exposure Limit (PEL) when used with the 75FFP100NL filter. Nuisance level refers to concentrations not exceeding the OSHA
PEL or other government occupational exposure limits, whichever is lower.
AUSTRALIAN CERTIFICATIONS
When components listed on the AS/NZS Approval Label are used, these respirators are approved under Australian and New
Zealand Standard 1716.2012 Lic. SMK 0563 for respiratory protection against hazardous gases, vapors and/or particulates;
depending on the air-purifying cartridges and/or filters used and the contaminant concentration and/or toxicity; and if there is
sufficient oxygen present in the contaminated atmosphere to support life.
BRAZILIAN CERTIFICATIONS
These respirators are approved under Brazilian Standards NBR 13695, NBR 13696 and NBR 13697 for respiratory protection
against hazardous gases, vapors and/or particulates, depending on the air-purifying cartridges and/or filters used and the
contaminant concentration and/or toxicity, and if there is sufficient oxygen present in the contaminated atmosphere to support life.
2
Hide quick links:
Advertisement
Table of Contents
