Using The Motion-Control Levers; Driving The Machine - Toro Z Master Professional 7000 Series Operator's Manual
Riding mower with 132cm or 152cm turbo force mower
Hide thumbs
Also See for Z Master Professional 7000
Series:
- Operator's manual (364 pages) ,
- Setup instructions (16 pages) ,
- Operator's manual (64 pages)
Table of Contents
Advertisement
Shutting Off the Engine
CAUTION
Children or bystanders may be injured if they
move or attempt to operate the machine while
it is unattended.
Always remove the key and engage the
parking brake when leaving the machine
unattended.
Figure 25
Important:
Make sure that you close the
fuel-shutoff valve before transporting or storing
the machine, as fuel leakage may occur. Engage
the parking brake before transporting the
machine. Make sure that you remove the key as
the fuel pump may run and cause the battery to
lose charge.
Using the Motion-Control
Levers
1. Motion-control
lever—N
EUTRAL
position
2. Center, unlocked position
3. Forward
Driving the Machine
g032595
The drive wheels turn independently, powered by
hydraulic motors on each axle. You can turn 1 side
in reverse while you turn the other forward, causing
the machine to spin rather than turn. This greatly
improves the machine maneuverability but may
require some time for you to adapt to how it moves.
The throttle control regulates the engine speed as
measured in rpm (revolutions per minute). Place
the throttle control in the F
performance. Always operate in the full throttle
position when mowing.
27
Figure 26
4. Backward
-
LOCK
5. Front of machine
position for best
AST
g004532
- Quick Links:
- Servicing the Engine Oil
- Schematics
Hide quick links:
Advertisement
Table of Contents
