Brake Maintenance; Burnishing The Brakes; Adjusting The Brakes; Hydraulic System Maintenance - Toro Greensmaster TriFlex 3320 Operator's Manual
Traction unit
Hide thumbs
Also See for Greensmaster TriFlex 3320:
- Installation instructions manual (8 pages) ,
- Service manual (360 pages) ,
- Manual (334 pages)
Table of Contents
Advertisement
Brake Maintenance
Burnishing the Brakes
Service Interval: Yearly
Firmly apply the brakes and drive the machine at
mowing speed until the brakes are hot, as indicated
by their smell. You may need to adjust the brakes
after the break-in period; refer to
(page
42).
Adjusting the Brakes
If the brake fails to hold the machine while parked,
you can adjust the brakes using the bulkhead fitting
near the brake drum; contact your Authorized Service
Dealer or refer to the Service Manual for more
information.
Note:
Burnish the brakes annually; refer to
Burnishing the Brakes (page
Adjusting the Brakes
42).
Hydraulic System
Maintenance
Hydraulic System Safety
•
Seek immediate medical attention if fluid is injected
into skin. Injected fluid must be surgically removed
within a few hours by a doctor.
•
Ensure that all hydraulic-fluid hoses and lines are
in good condition and all hydraulic connections
and fittings are tight before applying pressure to
the hydraulic system.
•
Keep your body and hands away from pinhole
leaks or nozzles that eject high-pressure hydraulic
fluid.
•
Use cardboard or paper to find hydraulic leaks.
•
Safely relieve all pressure in the hydraulic system
before performing any work on the hydraulic
system.
Servicing the Hydraulic
Fluid
Important:
Regardless of the hydraulic fluid
type used, any traction unit used for off-green
applications, verticutting or used during ambient
temperatures above 29° C (85°F) should have the
Oil Cooler Kit installed; refer to
Cooler (page
13).
Hydraulic Fluid Specifications
The recommended replacement fluid is as follows:
Toro Premium All Season Hydraulic Fluid (Available in
5-gallon pails or 55-gallon drums. See the Parts Catalog or
your authorized Toro distributor for part numbers.)
Alternate fluids: If the Toro fluid is not available, other
fluids may be used provided they meet all the following
material properties and industry specifications. The
use of synthetic fluid is not recommended. Consult
with your lubricant distributor to identify a satisfactory
product.
Note:
Toro will not assume responsibility for damage
caused by improper substitutions, so use only
products from reputable manufacturers who will stand
behind their recommendation.
42
5 Installing the Oil
Advertisement
Table of Contents
