Introduction; Accessories; Optional Items; Firmware Updates - Yamaha RIVAGE PM Series Owner's Manual
Dsp engine for digital mixing system
Hide thumbs
Also See for RIVAGE PM Series:
- Supplemental manual (31 pages) ,
- Supplemental manual (14 pages)
Table of Contents
Advertisement
Introduction
Thank you for choosing the Yamaha DSP-RX(-EX) DSP
engine unit.
In order to take full advantage of the DSP-RX(-EX)'s
superior functionality and enjoy years of trouble-free use,
please read this manual before you begin using the
product. After you have read the manual, keep it in a safe
place together with the warranty for future reference.
* Unless otherwise noted, the illustration in this manual are of the
DSP-RX-EX. The DSP-RX does not feature the EX logo badge
on the front panel.
Information
This product uses open source software. For information about
the license, refer to *** (product name)_OSSLicense_e.pdf,
which is included in the downloaded file.
Accessories
• AC power cord × 2
(Multiple AC power cords which have different kinds
of plug shapes may be included depending on the
region.)
• Euroblock plug
• Owner's Manual (this document)
Optional Items
• Mini-YGDAI card
• HY card
• DEK-DSP-RX (DSP Expansion Kit) (See page 16.)
Firmware Updates
You can update the unit firmware to improve the
operation, add functions, and correct possible
malfunctions.
Details on updating the firmware are available on the
following Yamaha Pro Audio global website:
http://www.yamahaproaudio.com/
For information on updating the firmware, please refer to
the firmware update guide available on the website.
8
DSP-RX(-EX) Owner's Manual
Precautions for
Rack Mounting
This unit is rated for operation at ambient temperatures
ranging from 0 to 40 degrees Celsius. If you mount this
unit along with other DSP unit(s) or other device(s) in an
EIA standard equipment rack, temperatures inside the
rack may rise, possibly resulting in impaired performance.
When rack mounting the unit, always observe the
following requirements to avoid heat buildup:
• When mounting the unit in a rack with devices such as
power amplifiers that generate a significant amount of
heat, leave 1U space or more between the DSP unit and
other equipment. Also, either leave the open spaces
uncovered or install appropriate ventilating panels to
minimize the possibility of heat buildup.
• To ensure sufficient airflow, leave the rear of the rack
open and position it at least 10 centimeters from walls
or other surfaces. If the rear of the rack cannot be left
open, install a commercially-available fan or similar
ventilating option to secure sufficient airflow. If you
have installed a fan kit, there may be cases in which
closing the rear of the rack will produce a greater
cooling effect. Refer to the rack and/or fan unit manual
for details.
Recessed Installation
If you want to recess the front panel surface of the unit
from the front edge of the rack, you can adjust the position
of the rack mount brackets to recess the unit by 50 mm or
100 mm, as shown in the illustration below.
NOTE
When you install the brackets, use the same screws that you just
removed.
50 mm
100 mm
- Quick Links:
- Table of Contents
- Installing an Hy Card
Hide quick links:
Advertisement
Table of Contents
