• Do not change the specifications or modify this prod- uct. Risk of injury and damage to the appliance. • Do not use the appliance: – if the mains cable or water hoses are damaged, – if the control panel, worktop or plinth area are dam- aged, that you can get access to the inner side of the appliance.
Delay start button Use the delay start button to delay the start of the washing programme with an interval of 3 hours. Refer to the chapter 'Setting and starting a washing programme'. Programme knob and on/off indicator light • To set a washing programme, turn the programme knob clockwise or anticlockwise.
Programme The pressure and temperature of the water, the var- iations of power supply and the quantity of dishes can change these values. Use of the appliance Refer to the following instructions for each step of pro- cedure: 1. Make a check if the water softener level is correct for the water hardness in your area.
Fill the salt container with 1 litre of water (only the first operation). Use of rinse aid Caution! Only use branded rinse aid for dishwashers. Do these steps to fill the rinse aid dispenser: It is normal that water overflows from the salt con- tainer when you fill it with salt.
Loading cutlery and dishes Helpful hints and tips Caution! Only use the appliance for household utensils that are applicable for dishwashers. Do not use the appliance to clean objects that can absorb water (sponges, household cloths, etc.). • Before you load cutlery and dishes, do these steps: –...
Warning! Adjust the height before you load the upper basket. Maximum height of the dishes in : upper basket Upper position 20 cm Lower position 24 cm Use of detergent Only use detergents (powder, liquid or tablet) that are applicable for dishwashers. Follow the data on the packaging: •...
Use of detergent tablets Put the detergent tablet in the detergent dispenser (A). Detergent tablets contain: • detergent • rinse aid • other cleaning agents. Do these steps to use detergent tablets: 1. Make sure that the detergent tablets are applicable for your water hardness.
Cancelling a delay start: 1. Press and hold the start/cancel button until, the start/ cancel indicator light and delay start indicator light go off. 2. Press the start/cancel button to start the washing programme. End of the washing programme Switch off the appliance in these conditions: •...
What to do if… The appliance does not start or stops during operation. If there is a fault, first try to find a solution to the problem yourself. If you cannot find a solution to the problem yourself, contact the Service Force Centre. Fault code and malfunction •...
The dishes are not clean Limescales particles on the dishes • The salt container is empty. The dishes are wet and dull There are streaks, milky spots or a bluish coating on glasses and dishes Dry water drop signs on glasses and dishes Technical data Dimensions...
Warning! To discard the appliance, follow the procedure: • Pull the mains plug out of the socket. • Cut off the mains cable and mains plug and discard them. Installation Warning! Make sure that mains plug is disconnected from the mains socket during installation.
Electrical connection Warning! The manufacturer is not responsible if you do not follow these safety precautions. Ground the appliance according to safety precautions. Make sure that the rated voltage and type of power on the rating plate agree with the voltage and the power of the local power supply.
Page 16
To buy accessories, consumables and spare parts at our online shop please visit: www.zanussi.co.uk www.zanussi.com...