Page 1
Instruction booklet Gas hob ZGF 642 ZGF 692 C ZGF 692 CT...
Page 2
Welcome to the world of Electrolux Welcome to the world of Electrolux Welcome to the world of Electrolux Welcome to the world of Electrolux Welcome to the world of Electrolux Thank you for choosing a first class product from Electrolux, which hopefully will provide you with lots of pleasure in the future.
Contents Contents Contents Contents Contents Important Safety Information Important Safety Information ... Important Safety Information Important Safety Information Important Safety Information Description of the Hobs ... 6 Instructions for the User Instructions for the User Instructions for the User ... Instructions for the User Instructions for the User Operation ...
Important Safety Information Important Safety Information Important Safety Information Important Safety Information Important Safety Information Y Y Y Y Y ou MUST r ou MUST r ou MUST read these war ou MUST r ead these war nings car ead these war ead these war ou MUST r ead these war...
Page 5
When using the hob for a long period time, the ventilation should be improved, by opening a window or increasing the extractor speed. Do not use this hob if it is in contact with water. Do not operate the hob with wet hands.
Description of the Hobs Description of the Hobs Description of the Hobs Model ZGF 642 1. Hob Top 2. Auxiliary Burner 3. Semi-rapid Burner 4. Rapid Burner 5. Triple crown Burner 6. Control knobs Model ZGF 692 C- ZGF 692 CT...
Triple crown burner (mod. ZGF 692 C/CT) A A A A A - Burner cap B B B B B - Burner crown C C C C C - Ignition electrode...
Page 8
Using the Wok Stand (only for Using the Wok Stand (only for Using the Wok Stand (only for model ZGF 692 C, ZGF 692 CT) model ZGF 692 C, ZGF 692 CT) model ZGF 692 C, ZGF 692 CT) model ZGF 692 C, ZGF 692 CT)
Page 9
As soon as a liquid starts boiling, turn down the flame so that it will barely keep the liquid simmering. Use only pans or pots with flat Use only pans or pots with flat Use only pans or pots with flat Use only pans or pots with flat Use only pans or pots with flat bottom.
Fig. 2. Model ZGF 692 C, ZGF 692 CT Model ZGF 692 C, ZGF 692 CT Model ZGF 692 C, ZGF 692 CT: The Model ZGF 692 C, ZGF 692 CT Model ZGF 692 C, ZGF 692 CT hob has two cast iron pan supports.
Page 11
T T T T T ake car ake care when r ake car ake car ake car e when r e when r e when removing them. e when r They They They They They heavy heavy heavy heavy heavy damage the hob or your kitchen damage the hob or your kitchen damage the hob or your kitchen...
Something Not W Something Not W orking? Something Not W Something Not W Something Not W If the hob is not working correctly, please carry out the following checks before contacting your local Service Force Centre. SYMPTOM SYMPTOM SYMPTOM SYMPTOM SYMPTOM There is no spark when lighting the gas.
Front Right Burner Front Right Burner Front Right Burner Front Right Burner (Mod. ZGF 692 C, ZGF 692 CT) (Mod. ZGF 692 C, ZGF 692 CT) (Mod. ZGF 692 C, ZGF 692 CT) (Mod. ZGF 692 C, ZGF 692 CT) (Mod.
Page 14
BURNER TYPE OF GAS POSITION NOMINAL THERMAL POWER NATURAL GAS 20 mbar NOMINAL FLOW VALUE = RATE 37.78 MJ/m NOZZLE REFERENCE Ws - 50.7 MJ/ m 1/100 mm NOMINAL THERMAL LPG GAS POWER 28-30/37 mbar NOMINAL FLOW VALUE = RATE 49.92 MJ/Kg NOZZLE REFERENCE 1/100 mm...
Important safety requirements Important safety requirements Important safety requirements Important safety requirements Important safety requirements This hob must be installed in accordance with the Gas Safety (Installation and Use) Regulations (Current Edition) and the IEE Wiring Regulations (Current Edition). For appliances installed in the Republic of Ireland please refer to NSAI- Domestic Gas Installation I.S.
Installation Installation Installation Installation Installation IMPOR IMPOR T T T T T ANT IMPOR IMPOR IMPOR This hob must be installed by a competent person to the This hob must be installed by a competent person to the This hob must be installed by a competent person to the This hob must be installed by a competent person to the This hob must be installed by a competent person to the relevant Gas Standards.
Gas Connection Gas Connection Gas Connection Gas Connection Gas Connection Connection to the gas supply should be with either rigid or semi-rigid pipe, i.e. steel or copper. The connection should be suitable for connecting to R 1/2 (1/2 BSP male thread). When the final connection has been made, it is essential that a thorough leak test is carried out on the hob and installation.
Location Location Location Location Location The hob may be located in a kitchen, a kitchen/diner or bed sitting room, but not in a bathroom, shower room or garage. Ensure that there is a minimum distance of 55 mm between the rear cut out edge and the wall.
Fitting the Hob into the Worktop Carry out the building in of the hob as follows: 1. place the seals supplied with the hob on the side edges of the cut out and at 8 mm. from the front and rear edges, as shown in the diagram, taking care that seals meet...
Building In Building In Building In Building In Building In B B B B B uilding over a cupboard or drawer uilding over a cupboard or drawer uilding over a cupboard or drawer uilding over a cupboard or drawer uilding over a cupboard or drawer If the hob is to be installed above a cupboard or drawer it will be necessary to fit a heat resistant board below the base of the hob on the underside of the work surface.
Electrical Connections Electrical Connections Electrical Connections Electrical Connections Electrical Connections Any electrical work required to install this hob should be Any electrical work required to install this hob should be Any electrical work required to install this hob should be Any electrical work required to install this hob should be Any electrical work required to install this hob should be carried out by a qualified electrician or competent person,...
3) Connect the brown (live) wire to the terminal in the plug which is marked with the letter 'L' or coloured red. Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath. A cut off plug inserted into a 13 amp socket is a serious A cut off plug inserted into a 13 amp socket is a serious A cut off plug inserted into a 13 amp socket is a serious...
Fault Finding Fault Finding Fault Finding Fault Finding Fault Finding Preliminary Electrical Systems Check Preliminary Electrical Systems Check Preliminary Electrical Systems Check Preliminary Electrical Systems Check Preliminary Electrical Systems Check S T A R T S T A R T S T A R T S T A R T S T A R T...
Page 24
A. EARTH CONTINUITY CHECK A. EARTH CONTINUITY CHECK A. EARTH CONTINUITY CHECK A. EARTH CONTINUITY CHECK A. EARTH CONTINUITY CHECK Appliance must be electrically disconnected - meter set on W (Ohms) x 1 scale and adjust zero if necessary. — Test leads from any appliance earth point to earth pin on plug. Resistance should be less than 0.1 W (Ohm), check all earth wires for continuity and all contacts clean and tight.
Page 25
Ignition System / Gas Ignition Ignition System / Gas Ignition Ignition System / Gas Ignition Ignition System / Gas Ignition Ignition System / Gas Ignition Ignitor does not spark Check plug top fuse and replace if necessary Check polarity and earth continuity of supply point Check earth continuity...
Commissioning Commissioning Commissioning Commissioning Commissioning When the hob has been fully installed it will be necessary to check the minimum flame setting. To do this, follow the procedure below. ! ! ! ! ! 1) Turn the gas tap to the MAX position and ignite. 2) Set the gas tap to the MIN flame position then turn the control knob from MIN to MAX several times.
Conversion from Natural Gas to LPG Conversion from Natural Gas to LPG Conversion from Natural Gas to LPG Conversion from Natural Gas to LPG Conversion from Natural Gas to LPG IMPOR IMPOR IMPOR T T T T T ANT IMPOR IMPOR The replacement/conversion from natural gas to LPG should only The replacement/conversion from natural gas to LPG should only...
Standard guarantee conditions Standard guarantee conditions We, Zanussi-Electrolux, undertake that if within 12 months of the date of the purchase this Zanussi-Electrolux appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: ·...
Page 29
Service and Spare Parts Service and Spare Parts Service and Spare Parts Service and Spare Parts Service and Spare Parts In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Service Force Centre by telephoning Your telephone call will be automatically routed to the Service Force Centre covering your postcode area.
European Guarantee European Guarantee European Guarantee European Guarantee European Guarantee This appliance is guaranteed by Electrolux in each of the countries listed at the back of this user manual, for the period specified in the appliance guarantee or otherwise by law. If you move from one of these countries to another of the countries listed below the appliance guarantee will move with you subject to the following qualifications: •...