Related Manuals for Yamaha DSP-AX630SE
Summary of Contents for Yamaha DSP-AX630SE
- Page 1 RX-V630RDS AV Receiver DSP-AX630SE AV Amplifier OWNER’S MANUAL MODE D’EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING...
- Page 2 Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than specified.
-
Page 3: Table Of Contents
INTRODUCTION INTRODUCTION CONTENTS ... 1 FEATURES ... 2 GETTING STARTED ... 3 Checking the package contents ... 3 Installing batteries in the remote control ... 3 CONTROLS AND FUNCTIONS ... 4 Front panel ... 4 Remote control ... 6 Using the remote control ... 7 Front panel display ... -
Page 4: Features
I About this manual • This document is the owner’s manual for both RX-V630RDS and DSP-AX630SE. Since DSP-AX630SE does not incorporate a tuner, descriptions on tuning are not applicable for DSP-AX630SE. Illustrations for the RX-V630RDS are mainly used for explanations. -
Page 5: Getting Started
Checking the package contents Check your package to make sure it contains the following items. Batteries (4) Remote control (AAA, R03, UM-4) TRANSMIT CODE SET SYSTEM POWER POWER STANDBY POWER MD/CD-R TUNER SLEEP D-TV/CBL V-AUX 6CH INPUT VCR 1 VCR2/DVR TV VOL TV CH VOLUME... -
Page 6: Controls And Functions
Priority cannot be set when 6CH INPUT is selected as the input source. BASS PROGRAM PRESET/TUNING A/B/C/D/E – DSP-AX630SE – SET MENU NEXT INPUT l / h Selects the input source you want to listen to or watch. VOLUME Controls the output level of all audio channels. - Page 7 Selects preset station numbers 1 to 8 when the colon (:) appears in the front panel display. Selects the tuning frequency when the colon (:) does not appear. SET MENU –/+ DSP-AX630SE Adjusts the setting on the SET MENU. RX-V630RDS A/B/C/D/E Selects preset station groups A to E.
-
Page 8: Remote Control
CONTROLS AND FUNCTIONS Remote control This section describes the remote control controls and their functions. Make sure that the AMP mode is selected before starting operation. See “REMOTE CONTROL FEATURES” on pages 48 to 50. TRANSMIT CODE SET POWER POWER STANDBY MD/CD-R TUNER... -
Page 9: Using The Remote Control
STEREO/EFFECT Switches between normal stereo and DSP effect reproduction. When STEREO is selected, 2-channel signals are directed to the main left and right speakers without effect sounds and all Dolby Digital and DTS signals (except the LFE channel) are mixed down to the main left and right speakers. -
Page 10: Front Panel Display
CONTROLS AND FUNCTIONS Front panel display MATRIX VCR2/DVR VIRTUAL DIGITAL SILENT PRO LOGIC 1 Processor indicators Lights up when the t, g, VIRTUAL, PRO LOGIC are activated. MATRIX lights up when the Dolby Digital EX decoder or the DTS-ES compatible decoder is activated. Input source indicator Shows the current input source with a cursor. -
Page 11: Preparation
LFE (low-frequency effect) channel with high fidelity when playing back Dolby Digital or DTS signals. The YAMAHA Active Servo Processing Subwoofer System is ideal for natural and lively bass reproduction. SPEAKER SETUP... -
Page 12: Connecting The Speakers
SPEAKER SETUP Connecting the speakers Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass. - Page 13 I SUBWOOFER jack When using a subwoofer with built-in amplifier, including the YAMAHA Active Servo Processing Subwoofer System, connect the input jack of the subwoofer system to this jack. Low bass signals distributed from the main, center and/or rear channels are directed to this jack in accordance with your SPEAKER SET selections. The LFE (low-frequency effect) signals generated when Dolby Digital or DTS is decoded are also directed to this jack in accordance with your SPEAKER SET selections.
-
Page 14: Impedance Selector Switch
SPEAKER SETUP I IMPEDANCE SELECTOR switch WARNING Do not change setting of the IMPEDANCE SELECTOR switch when the power of this unit is on, this may damage the unit. If this unit fails to turn on when STANDBY/ON (or SYSTEM POWER) is pressed, the IMPEDANCE SELECTOR switch may not be fully slid to either position. -
Page 15: Connections
(such as a tape deck, MD recorder and CD player or changer), connect them to the jack with the same number labels as !, #, $ etc. YAMAHA applies this labeling system to all its products. • After you have completed all connections, check them again to make sure they are correct. -
Page 16: Connecting Video Components
CONNECTIONS Connecting video components Refer to the connection examples on the next page. I Types of video jacks There are three types of video jacks as follows: COMPONENT VIDEO S VIDEO VIDEO VIDEO jack Conventional composite video signal. S VIDEO jack Transmits color and luminance separately and achives high-quality color reproduction. - Page 17 AUDIO AUDIO OUTPUT INPUT AUDIO AUDIO DIGITAL INPUT VCR 2 /VDR COAXIAL OPTICAL D-TV/CBL (REC) VCR 1 /CD-R (PLAY) D-TV MD/CD-R MAIN /CBL SURROUND MD/CD-R WOOFER OPTICAL WOOFER CENTER DIGITAL OUTPUT 6CH INPUT OUTPUT (RX-V630RDS) OPTICAL OUTPUT INPUT M0DE PRESET/TUNING EDIT TUNING MODE AUTO/MAN'L MONO...
-
Page 18: Connecting Audio Components
MD recorder to the DIGITAL OUTPUT MD/ CD-R jack for digital recording. Connect the optical digital output jack on your CD recorder or MD recorder to the DIGITAL INPUT MD/ CD-R jack to play a source from your recording component. DSP-AX630SE AUDIO OUTPUT Tuner COAXIAL OUTPUT... -
Page 19: Connecting The Antennas
A properly installed outdoor antenna provides clearer mm (inch) reception than an indoor one. If you experience poor reception quality, an outdoor antenna may improve the quality. Consult the nearest authorized YAMAHA dealer or service center about the outdoor antennas. CONNECTIONS... -
Page 20: Connecting An External Amplifier
OUTPUT SUBWOOFER jack When using a subwoofer with built-in amplifier, including the YAMAHA Active Servo Processing Subwoofer System, connect the input jack of the subwoofer system to this jack. Low bass signals distributed from the main, center and/or rear channels are directed to this jack in accordance with your SPEAKER SET selections. -
Page 21: Connecting The Power Supply Cords
Connecting the power supply cords AC OUTLETS SWITCHED 100W MAX. TOTAL (Europe model) I Connecting the AC power cord Plug in this unit to the wall outlet. I AC OUTLETS (SWITCHED) U.S.A., Canada, China, Europe, Singapore and General models ... 2 OUTLETS U.K. -
Page 22: Speaker Mode Settings
SPEAKER MODE SETTINGS This unit has 6 SPEAKER SET items on the SET MENU that you must set according to the number of speakers in your configuration and their size. The following table summarizes these SPEAKER SET items, and shows the initial settings as well as other possible settings. -
Page 23: Adjusting Speaker Output Levels
ADJUSTING SPEAKER OUTPUT LEVELS This section explains how to adjust speaker output levels using the test tone generator. When this adjustment is complete, the output level heard at the listening position should be the same from each speaker. This is important for best performance of the digital sound field processor, and the various decoders (Dolby Digital, Dolby Pro Logic, Dolby Pro Logic... - Page 24 ADJUSTING SPEAKER OUTPUT LEVELS LEFT RIGHT CENTER SUBWOOFER LEFT SURROUND RIGHT SURROUND REAR CENTER * Subwoofer test tone is output after the rear left speaker (LEFT SURROUND). The front panel display shows which speaker is outputting the test tone. Note •...
-
Page 25: Basic Playback
NATURAL SOUND AV RECEIVER STANDBY BASS SILENT SPEAKERS STEREO PROGRAM PRESET/TUNING A/B/C/D/E EFFECT PHONES – TRANSMIT CODE SET SYSTEM POWER POWER STANDBY POWER MD/CD-R TUNER SLEEP D-TV/CBL V-AUX 6CH INPUT VCR 1 VCR2/DVR TV VOL TV CH VOLUME – – –... - Page 26 BASIC PLAYBACK Start playback or select a broadcast station on the source component. Refer to the operation instructions for the component. Adjust the volume to the desired level. The volume level is displayed digitally. Example: –70 dB Control range: VOLUME MUTE (minimum) to 0 dB (maximum) The volume level indicator also shows the current volume level as a bar graph.
-
Page 27: Input Modes And Indications
Input modes and indications This unit comes with a variety input jacks. You can select the type of input signals you desire. Each time you turn on the power of this unit, the input mode is set according to “8 INPUT MODE” setting on the SET MENU (see page 47 for details). -
Page 28: Selecting A Sound Field Program
BASIC PLAYBACK Selecting a sound field program You can enhance your listening experience by selecting a DSP program. For details about each program, see pages 29 to 33. NATURAL SOUND AV RECEIVER STANDBY BASS SILENT SPEAKERS STEREO PROGRAM PRESET/TUNING A/B/C/D/E EFFECT –... - Page 29 I Selecting PRO LOGIC You can enjoy the 2-channel sources decoded into five or six discrete channels by selecting PRO LOGIC program No. 9. NATURAL SOUND AV RECEIVER STANDBY BASS SILENT SPEAKERS STEREO PROGRAM PRESET/TUNING A/B/C/D/E EFFECT PHONES – PROGRAM l / h CODE SET TRANSMIT SYSTEM...
-
Page 30: Normal Stereo Reproduction
BASIC PLAYBACK I Playing Dolby Digital Surround EX or DTS ES software Press EX/ES to turn on the Dolby Digital EX or DTS-ES compatible decoder. The MATRIX indicator lights up. EX/ES MATRIX VCR2/DVR V-AUX DIGITAL MOVIE THTR 1 S p e c t a c l e E X The display changes AUTO →... -
Page 31: Digital Sound Field Processing (Dsp)
The traditional stereo system that uses only two speakers is not capable of recreating a realistic sound field. YAMAHA’s DSP requires four effect speakers to recreate sound fields based on the measured sound field data. The processor controls the strength and delay time of the signals output from the four effect speakers to localize the virtual sound sources and fully encompass the listener. -
Page 32: Cinema-Dsp
CINEMA-DSP is an upgraded version of YAMAHA DSP specially designed for movie soundtracks. CINEMA-DSP integrates the DTS, Dolby Digital, and Dolby Pro Logic surround sound technologies with YAMAHA DSP sound field programs to provide a surround sound field. It recreates comprehensive movie sound design in your audio room. In CINEMA-DSP sound field programs, YAMAHA’s exclusive DSP processing is added to the Main left and right, and... -
Page 33: Dolby Pro Logic
Dolby Surround software into 5 discrete full-range channels (3 channels in front and 2 channels in rear). There are 2 modes; MOVIE for movies and MUSIC for 2-channel audio sources. These programs use YAMAHA’s tri-field DSP processing on each of the Dolby Digital or DTS signals for the front, left surround, and right surround channels. -
Page 34: Cinema-Dsp Programs
CINEMA-DSP CINEMA-DSP programs I For movie programs: No. 7 to 9 This unit automatically chooses the appropriate decoder and DSP sound field pattern according to the input signal format. Table of Program Names for Each Input Format Input 2 channel Stereo Program MOVIE... - Page 35 The following list gives you a brief description of the sound fields produced by each of the DSP programs. Keep in mind that most of these are precise digital recreations of actual acoustic environments. Select the DSP program that you feel sounds best regardless of the name and description given for it below.
-
Page 36: Tuning Rx-V630Rds
Automatic and manual tuning There are 2 ways to tune; automatic and manual. Automatic tuning is effective when station signals are strong and there is no interference. I Automatic tuning NATURAL SOUND AV RECEIVER STANDBY BASS SILENT SPEAKERS STEREO PROGRAM PRESET/TUNING A/B/C/D/E EFFECT... -
Page 37: Presetting Stations
Presetting stations I Automatically presetting stations (for FM stations) You can use the automatic preset tuning feature to store FM stations. This function enables this unit to automatically tune in to FM stations with strong signals, and to store up to 40 (8 stations x 5 groups) of those stations in order. - Page 38 TUNING I Manually presetting stations You can also store up to 40 stations (8 stations x 5 groups) manually. NATURAL SOUND AV RECEIVER STANDBY BASS SILENT SPEAKERS STEREO PROGRAM PRESET/TUNING A/B/C/D/E EFFECT PHONES – Tune in to a station. See page 34 for tuning instructions. VCR2/DVR V-AUX D-TV/CBL...
-
Page 39: Tuning In To A Preset Station
Tuning in to a preset station You can tune any desired station simply by selecting the preset station number under which it was stored. NATURAL SOUND AV RECEIVER STANDBY BASS SILENT SPEAKERS STEREO PROGRAM PRESET/TUNING A/B/C/D/E EFFECT PHONES – EFFECT PRESET/CH LEVEL SET MENU... -
Page 40: Receiving Rds Stations
RECEIVING RDS STATIONS RDS (Radio Data System) is a data transmission system by FM stations in many countries. RDS data contains various information such as PS (Program Service name), PTY (Program Type), RT (Radio Text), CT (Clock Time), EON (Enhanced Other Networks), etc. The RDS function is carried out among the network stations. Description of RDS data This unit can receive, PS, PTY, RT, CT, and EON data when receiving RDS broadcasting stations. -
Page 41: Pty Seek Function
PTY SEEK function If you select the desired program type, this unit automatically searches all preset RDS stations that are broadcasting a program of the required type. Press PTY SEEK MODE to set this unit in the PTY SEEK mode. The program type of the station being received or “NEWS”... -
Page 42: Sleep Timer
Use this feature to automatically set this unit in the standby mode after the amount of time you have set. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source. The sleep timer also automatically turns off the external component(s) connected to AC OUTLET(S). -
Page 43: Recording
Recording adjustments and other operations are performed from the recording components. Refer to the operation instructions for these components. NATURAL SOUND AV RECEIVER STANDBY BASS SILENT SPEAKERS STEREO PROGRAM PRESET/TUNING A/B/C/D/E EFFECT PHONES – CODE SET TRANSMIT SYSTEM POWER POWER STANDBY POWER MD/CD-R... -
Page 44: Advanced Operation
ADVANCED OPERATION The SET MENU consists of 10 items including the speaker mode setting. Choose the appropriate item and adjust or select the values as necessary. • You can adjust the items on the SET MENU while playing a source. Items 1 SPEAKER SET A CENTER... -
Page 45: Speaker Set (Speaker Mode Settings)
DSP program group buttons to exit SET MENU. PRESET/CH HALL SPORTS – SELECT /DTS SUR. On the front panel DSP-AX630SE NATURAL SOUND AV RECEIVER STANDBY BASS SILENT SPEAKERS STEREO PROGRAM – SET MENU... - Page 46 SET MENU I 1B MAIN (main speaker mode) Choices: LARGE, SMALL LARGE Select this if you have large main speakers. The entire range of the main left and right channel signal is directed to the main left and right speakers. SMALL Select this if you have small main speakers.
-
Page 47: Lfe Level
I 1F MAIN Lv (main level mode) Change this setting if you cannot match the output level of the center, rear (L/R), and rear center speakers with the main speakers because of unusually high-efficiency performance from the main speakers. Choices: Nrm (Normal), –10 dB Select this if you can match the output level of your effect speakers with that of your main speakers when using the test tone. -
Page 48: Range (Dynamic Range)
[B] DVD, V-AUX, VCR 2/DVR, VCR 1, D-TV/CBL I 7B OPTICAL OUT for OPTICAL OUTPUT jack (1) (1) MD/CD-R, ( Choices: DSP-AX630SE CD, V-AUX, VCR 2/DVR, VCR 1, D-TV/CBL, DVD I 7C OPTICAL IN for OPTICAL INPUT jacks (2) to (4) Choices:... -
Page 49: Input Mode (Initial Input Mode)
8 INPUT MODE (initial input mode) Use this feature to designate the input mode for sources connected to the DIGITAL INPUT jacks when you turn on this unit (see page 25 for details about the input mode). Choices: AUTO, LAST AUTO Select this to allow this unit to automatically detect the type of input signal and select the appropriate input mode. -
Page 50: Remote Control Features
REMOTE CONTROL FEATURES In addition to controlling this unit, the remote control can operate other A/V components made by YAMAHA and other manufacturers. To control other components, you must set up the remote control with the manufacturer codes. Control area... -
Page 51: Setting The Manufacturer Code
I Clearing setup manufacturer code for the component control Press an input selector button or Å to select the component control for which you want to clear the manufacturer code. Code YAMAHA 0005 YAMAHA 0024 YAMAHA 0003 YAMAHA 0098 Press CODE SET by using a ballpoint pen or –... -
Page 52: Controlling Other Components
REMOTE CONTROL FEATURES Controlling other components You can operate other components when you have set the manufacturer code for your component. Note, however, that some buttons may not operate your component. Once you select an input source, the remote control switches to the mode for operating the component. -
Page 53: Adjusting The Level Of The Effect Speakers
ADJUSTING THE LEVEL OF THE EFFECT SPEAKERS You can adjust the output level of each effect speaker (center, rear left and right, rear center and subwoofer) while listening to a source. Adjustment should be made with the remote control. CODE SET TRANSMIT SYSTEM POWER... -
Page 54: Adjusting The Delay Time
ADJUSTING THE DELAY TIME You can adjust the time difference between the beginning of the sound from the main speakers and the beginning of the sound effect from the rear speakers. The larger the value, the later the sound effect is generated. The delay time can be individually adjusted to all DSP programs. -
Page 55: Adjusting The Parameter Settings For Pro Logic Music
ADJUSTING THE PARAMETER SETTINGS FOR PRO LOGIC Changing parameter settings You can adjust the values of PRO LOGIC parameters so the sound fields are recreated accurately in your listening room. Adjustments should be made with the remote control. TRANSMIT CODE SET SYSTEM POWER POWER... -
Page 56: Troubleshooting
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the power cord, and contact the nearest authorized YAMAHA dealer or service center. I General... - Page 57 Problem The sound suddenly The protection circuit has been activated goes off. because of a short circuit, etc. The sleep timer has functioned. The sound is muted. Only the speaker on Incorrect cable connections. one side can be heard. Incorrect setting of “5 L/R BALANCE” on the SET MENU.
- Page 58 TROUBLESHOOTING Problem No sound from the rear “1C REAR LR” or “1D REAR CT” on center speaker. the SET MENU is set to NON. The Dolby Digital EX decoder or the DTS-ES compatible decoder is not on. A “humming” sound Incorrect cable connections.
- Page 59 I Tuner RX-V630RDS Problem FM stereo reception is The characteristics of FM stereo noisy. broadcasts may cause this problem when the transmitter is too far away or the antenna input is poor. There is distortion, and There is multipath interference. clear reception cannot be obtained even with a good FM antenna.
-
Page 60: Glossary
Based on a wealth of actually measured data, YAMAHA CINEMA DSP uses YAMAHA original sound field technology to combine Dolby Pro Logic, Dolby Digital and DTS systems to provide the visual and audio experience of movie theater in the listening room of your own home. -
Page 61: Virtual Cinema Dsp
I Virtual CINEMA DSP YAMAHA has developed a virtual CINEMA DSP algorithm that allows you to enjoy DSP sound field surround effects even without any rear speakers by using virtual rear speakers. It is even possible to enjoy virtual CINEMA DSP using a minimal 2-speaker system that does not include a center speaker. -
Page 62: Specifications
AUDIO SECTION • Minimum RMS Output Power for Main, Center, Rear, Rear Center 20 Hz to 20 kHz, 0.06% THD, 8 Ω ... 75 W 1 kHz, 0.06% THD, 8 Ω ... 80 W • DIN Standard Output Power [Europe model] 1 kHz, 0.7% THD, 4 Ω... - Page 63 LIST OF MANUFACTURER’S CODES LISTE DES CODES FABRICANTS LISTE DER HERSTELLER-CODES LISTA ÖVER TILLVERKARKODER LISTA DEI CODICI DEL FABBRICANTE LISTA DE CÓDIGOS DE FABRICANTES LIJST MET FABRIKANTENCODES CLARIVOX CLATRONIC ADMIRAL 0411, 0451, 0911, CONCERTO 1021, 1081 CONDOR AIKO 0891 CONTEC AKAI 0061, 0101, 0231, CONTINENTAL EDISON...
- Page 64 0601, 1171 NECKERMANN LENOIR 0601, 1511 LEYEO 1181 LIFETEC 2591, 2601, 2611, 2621, 2641, 2651, 2661, 2671, 2681, NEDIATOR 2691, 2711, 2761, NICAMAGIC 2771, 2781 NIKKAI LOEWE OPTA 0121, 0131, 0581, 0611, 1081 NOBLIKO LOGIC 1691, 2281 NOGAMATIC 0571 LOGIK 0551, 1681, 2281 LOWEWE 0831...
- Page 65 THORN-FERGUSON 0281, 0371, SATELLITE TUNER 0551, 0651, 0781, AKAI 0861, 0881, 1131, ALBA 1181, 1361, 1461, AMSTRAD 1971, 1991, 2281 0141, 0791, 1471 ANKARO TOSHIBA 0141, 0381, 0481, 1221, 1271, 1701, ASTRA 1741, 1851, 2151, BARCOM 2801, 2811 BLAUPUNKT 0966 TRANS CONTINENS 0451 BMC SATELLITE TRISTAR...
- Page 66 0042, 0742, 0782 WELTBLICK 0012 0952 WHITE WESTINGHOUSE 0042, 0142, 0192, 0032 0222, 0242, 0392, XENON 0162 0632, 0732, 0742, YAMAHA 0042, 1202 0762, 0772, 0782, YOKO 0012, 0062, 0072 0792, 0872 0162, 0202, 0292, DVD PLAYER 0442, 0512, 0522, AKAI 0058...
- Page 67 LUXOR 0185, 1895, 1905 THOMSON MAGNAVOX 1865, 1875 TOSHIBA MARANTZ 0165, 0175, 0545, VECTOR RESEARCH 0665, 1275, 1335, 1405, 1505, 1875, YAMAHA 1955 MATSUSHITA 1095, 1605 0535 MEDION 0075, 1995, 2005, 2015 CD RECORDER/CD-RW MEMOREX 0525, 1015, 1265, HITACHI 1275, 1285, 1675...
- Page 68 YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN Printed in Malaysia V874860 YAMAHA MUSIC AUSTRALIA PTY, LTD.