Yamaha. This product should be used only with the components supplied or; a cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is used, please observe all safety markings and instructions that accompany the accessory product.
Page 3
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables.
Page 4
• Use the specified adaptor (PA-3C or PA-3B or an equivalent recommended by Yamaha) only. Using the wrong adaptor can result in damage to the instrument or overheating. • Check the electric plug periodically and remove any dirt or dust which may have accumulated on it.
Page 5
fluids, or chemical-impregnated wiping cloths. Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed. Always turn the power off when the instrument is not in use.
This can be a big help if you know what genre of music you want to play, but you don’t know what settings to make. Just select the genre, and the PSR-292 takes...
• External Clock...69 • Bulk Data Send...69 • Keyboard Out...70 • Style Out ...70 • Song Out...70 • Loading a Song into PSR-292’s Flash Memory 71 • PC Mode...73 Function ... 74 • Using the Function parameters...74 Troubleshooting ... 77 Data Backup &...
Panel Controls and Terminals I Front Panel q Power switch ([STANDBY/ON]) w [MASTER VOLUME] dial This determines the overall volume of the PSR-292. e [TOUCH] button This turns the Touch function on and off. (See page 30.) r [HARMONY] button This turns the Harmony effect on and off.
the category of songs, voices, styles, M.D.B. or Func- tions. Pressing the buttons steps through the various categories. The SELECT [ ] buttons are used to decrease or increase the number of the desired song, voice, style, M.D.B., or specific Function, as well as to adjust certain settings.
Setting Up This section contains information about setting up your PSR-292 for playing. Make sure to read this section carefully before using the instrument. Power Requirements Although the PSR-292 will run either from an optional AC adaptor or batteries, Yamaha recommends use of an AC adaptor whenever possible. An AC adaptor is more environmentally friendly than batteries and does not deplete resources.
• Even when the switch is in the “STANDBY” position, electricity is still flowing to the instrument at the mini- mum level. When you are not using the PSR-292 for a long time, make sure you unplug the AC power adaptor from the wall AC outlet, and/or remove the batteries from the instrument.
Quick Voices Step 1 Guide Playing the Piano Simply by pressing the [PORTABLE GRAND] button, you can automatically select the Grand Piano voice. Press the [PORTABLE GRAND] button. Play the keyboard. Want to find out more? See page 20. G Panel Voice List Voice Name Voice Name PIANO...
Selecting and Playing Other Voices The PSR-292 has a huge total of 605 dynamic and realistic instrument voices. Let’s try a few of them out now... Press the [VOICE] button. Playing with the DJ Feature The exciting new DJ feature gives you a full variety of dance and DJ sounds — letting you create your own real-time mixes and groove along with various contemporary rhythms.
Playing the Songs The PSR-292 is packed with a total of 100 songs, including one Demo song — which has been specially created to show- case the rich and dynamic sounds of the instrument. There are also 99 additional songs, designed to be used with the edu- cational Lesson feature.
Recording Your Own Song Much like a multi-track tape recorder, the PSR-292 lets you play and record the individual parts of your own song in real time. Select the desired User song (201 - 205) for recording. • You can also select the appropriate category by using the [ ] buttons.
Music Database Here’s a convenient feature that lets you instantly reconfigure the PSR-292 for playing in different music styles. If you want to per- form in a certain genre but don’t know what settings to make, simply select the genre from the Music Database — and the PSR- 292 makes all the right settings for you! •...
Page 17
Looking up Chords in the Dictionary The convenient Dictionary function teaches you how to play chords by showing you the individual notes. In the example below, we’ll learn how to play a GM7 chord... Keys for entering Keys for entering the chord the chord type (C1 –...
Panel Display Indications The PSR-292 features a large multi-function display that shows all important settings for the instrument. The section below briefly explains the various icons and indications in the display. Octave indicator q Notation / w Keyboard These two portions of the display conveniently indi- cate notes.
Page 19
Style mode and auto accompaniment are on. Music Stand Insert the bottom edge of the included music stand into the slot located at the top rear of the PSR-292 control panel. Panel Display Indications !3 Song track indicators In song recording and playback, these indicate the sta- tus of the tracks.
Portable Grand This convenient function lets you instantly call up the Grand Piano voice. Playing the Portable Grand Press the [PORTABLE GRAND] button. Doing this automatically selects the special “Stereo Sampled Piano” Grand Piano voice. Using the Metronome Call up the Tempo setting. Press the [TEMPO/TAP] button.
Turn on the Metronome. Press the [METRONOME] button. To turn the Metronome off, press the [METRONOME] button again. Setting the Metronome Time Signature The time signature of the Metronome can be set to var- ious quarter-note based meters. The Time Signature can be set in the Function mode (page 76).
G For example, when 601 “DJ Set 1” is selected: Accompaniment area (C1 – F#2) area Ohh2 • The PSR-292 has a Demo song and DJ Cancel function that allows you to disable Demo song and DJ function. Set Demo and DJ Cancel in the Function mode (page 76).
Playing Voices The PSR-292 features a total of 605 authentic voices — all of which have been created with Yamaha’s sophisticated AWM (Advanced Wave Memory) tone generation system. These include 480 XG voices and drum kits. The PSR-292 also has a Dual Voice or Split Voice function that lets you combine two different voices in a layer, or play from separate areas of the keyboard, play the two together across the keyboard.
Page 24
Playing Voices G Select the voice number Select a voice by using the dial or the SELECT [ I Use the numeric keypad. There are two ways to select voices: 1) directly entering the voice number with the numeric keypad, or 2) using the [+]/[-] buttons to step up and down through the voice numbers.
Page 25
Play the selected voice. Since either the Style, Song or M.D.B. mode is active in the background, you can also play styles, songs or M.D.B., respectively, in the Voice mode by simply pressing the [START/STOP] button. The last selected style, song or M.D.B.
Playing Voices #000 OTS This special “voice” is actually a convenient feature which automatically selects a suitable voice for you when you select a style. The voice is selected to best match the style or song you’ve called up. Select voice #000 (OTS). Dual Voice The Dual Voice function lets you combine two different voices in a layer —...
Split Voice The Split Voice function lets you assign two different Voices to opposite areas of the keyboard, and play one Voice with your left hand while your right plays another. For example, you could play bass with the left hand and play piano with the right. The right-hand (or upper) Voice is selected in the Main Voice mode (page 23), and the left-hand (or lower) Voice is selected in the Function mode (page 75), along with the other Split Voice parameters shown below.
Playing Voices One Touch Setting This convenient feature automatically selects the voice to best match the selected style — simply by pressing one of the two One Touch Setting buttons. Two types of One Touch Settings are available. For each style, you can create and store your own custom One Touch Settings. G One Touch Setting Parameters Main Voice Voice Number...
It also determines the pitch of the songs. This allows you to easily match the pitch of the PSR-292 to other instruments or singers, or play in a different key without changing your fingering. The Transpose settings can be adjusted over a range of ±...
Turn the Touch function on or off as desired by pressing the [TOUCH] button. Touch Sensitivity lets you set how the PSR-292 responds to your playing strength, allowing you to customize the keyboard to suit your own playing style. The default Touch Sensitivity is 2 (Medium).
Effects The PSR-292 is equipped with a wide variety of effects that can be used to enhance the sound of the voices. The PSR-292 has four separate effect systems — Harmony, Reverb, Chorus and DSP — and each has many different effect types to choose from.
DSP Send Level Dual Voice DSP Send Level Split Voice DSP Send Level • Each voice of the PSR-292 has its own independent DSP setting. • Fifty-one additional DSP Types are available when controlling the PSR-292 from a MIDI device.
F#2 and lower) is for the auto accompaniment function. The PSR-292 also features the convenient Dictionary function (page 45). Dictionary provides you with a built- in “chord encyclopedia” that teaches you how to play any chord you specify by showing you the appropriate notes in the display.
Selecting and Playing Styles I Use the numeric keypad. Style numbers can be selected in the same way as with the voices (page 24). You can use the numeric keypad to directly enter the style number, or use the [+]/[-] buttons to step up and down through the styles. Playing the Styles The panel buttons below function as style controls.
Page 37
[TEMPO/TAP] button twice at the desired tempo. I Using Sync Start The PSR-292 also has a Sync Start function that allows you to start the style by simply pressing a key on the keyboard. To use Sync Start, first press the [SYNC START] button (the beat marks all flash to indicate Sync Start stand-...
Page 38
Selecting and Playing Styles Starting with an Intro section Each style has its own two- or four-measure Intro section. When used with the auto accompaniment, many of the Intro sections also include special chord changes and embellishments to enhance your performance. To start with an Intro section: 1) Press the [MAIN/AUTO FILL] button —...
Page 39
Change chords using the auto accompaniment feature. Try playing a few successive chords with your left hand, and notice how the bass and chord accompaniment change with each chord you play. (Refer to page 43 for more information on how to use auto accompaniment.) Stop the style.
Selecting and Playing Styles Sync Stop This convenient feature lets you stop (or pause) the style by releasing your fingers from the auto accompaniment area of the keyboard. Playing the chord again restarts the style. This is ideal for putting dynamic breaks in your performance — for example, stopping the rhythm and accompaniment briefly while you play a melodic break or solo with your right hand.
Changing the Tempo The tempo of style playback can be adjusted over a range of 32 - 280 bpm (beats per minute). Call up the Tempo setting. Press the [TEMPO/TAP] button. Change the value. Use the dial or numeric keypad to set the desired Tempo value, or use the [+]/[-] buttons to increase or decrease the value.
Selecting and Playing Styles Accompaniment Sections (Main A/B and Fill-ins) While the style is playing, you can add variation in the rhythm/accompaniment by pressing the [MAIN/AUTO FILL] button. This switches between the Main A and Main B sections, automatically playing a fill-in pattern to smoothly lead into the next section.
(see Single Finger Chords below). The Fingered technique is that of conventionally playing all the notes of the chord. Whichever method you use, the PSR-292 “understands” what chord you indicate and then automatically generates the accompaniment.
Page 44
Selecting and Playing Styles Chord Name/[Abbreviation] Major [M] Add ninth [(9)] Sixth [6] Sixth ninth [6(9)] Major seventh [M7] Major seventh ninth [M7(9)] Major seventh add sharp eleventh [M7(#11)] Flatted fifth [(b5)] Major seventh flatted fifth [M7b5] Suspended fourth [sus4] Augmented [aug] Major seventh augmented [M7aug] Minor [m]...
Dictionary The Dictionary function is essentially a built-in “chord book” that shows you the individual notes of chords. It is ideal when you know the name of a certain chord and want to quickly learn how to play it. Press the [DICTIONARY] button. Specify the root of the chord.
Page 46
Selecting and Playing Styles Play the chord. Play the chord (as indicated in the display) in the chord area of the keyboard. The chord name flashes in the display when the correct notes are held down. (Inversions for many of the chords are also recognized.) To leave the Dictionary function, press the [DICTIONARY] button again.
Beautiful sounding harmonies can be built in this manner. The use of intervals and chords is one of the most important elements in music. A wide variety of emotions and feelings can be created depending on the types of chords used and the order in which they are arranged. •...
If you want to play in a certain genre of music but don’t know which style and voice settings would be appropriate, simply select the desired genre from the Music Database. The PSR-292 automatically makes all appropriate panel settings to let you play in that music style! Press the [M.D.B.] (MUSIC DATABASE) button.
Page 49
In this example, we will select #208 “Xmas Walz” and play the Song “Silent Night”. Play the chords with your left hand and the melody lines with your right hand along with the music. As soon as you play a chord with your left hand, the style starts. For information on how to enter chords, see “Multi Fingering”...
Using the Music Database Data stored by the Music Database Each of the Music Database settings has been specially programmed to match the selected musical style and each features the best suited voice (or combination of voices), style and other settings. Pressing the [M.D.B.] (MUSIC DATABASE) button and selecting a number lets you instantly reconfigure all relevant settings, conveniently allowing you to start playing in the desired genre with all the appropriate sounds —...
Selecting and Playing Songs The PSR-292 features a total of 105 songs. These include 100 songs that showcase the rich and dynamic sounds of the instrument, and 99 of these songs can be used with the educa- tional Lesson feature (page 61), a powerful tool that makes learning songs fun and easy.
Page 52
Listening to the Flash Memory Song The PSR-292 can play a song loaded into its internal flash memory. To do this, you’ll need to connect the PSR-292 to a personal computer, and use the “Song Filer” software to transmit the song from the computer.
Playing the Songs The Panel buttons below function as Song controls. Turns on the A-B Repeat function (page 54). Pauses playback. About the Song Tracks Melody tracks Track 2 generally contents data for the left hand. Track 1 generally contents data for the right hand.
Selecting and Playing Songs A-B Repeat The convenient A-B Repeat function is an ideal aid for practicing and learning. It allows you to specify a phrase of a song (between point A and point B) and repeat it — while you play or practice along with it. While playing a song, set point A (the start point).
Melody Voice Change The PSR-292 lets you play a melody on the keyboard along with each of the songs, either with the original melody voice or one of your own selection. The convenient Melody Voice Change feature takes this one step further — it lets you replace the original voice used for the melody of the song with the panel voice of your own selection.
— for creating your own complete, fully orchestrated compositions. You can record and save up to five User songs. Song recording on the PSR-292 is similar to using a tape recorder; whatever you play on the keyboard is recorded in real time as you play it. Also, when you record subsequent parts to other tracks, you can hear the previously recorded parts as you record new ones.
Page 57
Select a User song number for recording. Use the dial or numeric keypad to select the desired song: 201 - 205. If no song is manually selected, the PSR-292 automatically selects the first avail- able empty song number. Select a track number for recording.
Page 58
Song Recording Muting Tracks During Playback While recording is enabled, you can selectively mute different tracks. This is useful for when you want to clearly hear certain tracks, and not others, during recording. Muting can also be done “on the fly” during playback. To use muting, press the corresponding SONG MEMORY button, repeatedly if necessary, until the desired track number in the display is off.
Song Clear The Song Clear operation completely erases all recorded data on all tracks of a selected User song. Use this operation only when you’re sure you want to erase a song and record a new one. To erase an individual track of a song while leaving the other tracks intact, use the Track Clear operation (page 60).
Song Recording Track Clear The Track Clear operation completely erases all recorded data on a selected track of a selected User song, leaving the other tracks intact. Use this operation only when you’re sure you want to erase a track and record a new one. To erase the data of an entire song, use the Song Clear operation (page 59).
I Lesson 2 — Waiting In this lesson step, the PSR-292 waits for you to play the correct notes before continuing playback of the song. I Lesson 3 — Minus One This lesson step plays back the song with one part muted, letting you play and master the missing part yourself —...
Page 62
65). After a short pause, the Lesson begins again automati- cally. Press the [START/STOP] button to stop the Lesson. The PSR-292 exits from the Lesson feature automatically when the [START/ STOP] button is pressed. (Song Lesson off)
In Lesson 1, simply play one note repeatedly in time with the music. Regarding chords and the use of the left hand, the PSR-292 actually has two different types of songs: 1) songs with normal left-hand chords, and 2) songs in which the left hand plays arpeggios or melodic figures in combination...
Song Lesson Lesson 2 — Waiting In this lesson step, the PSR-292 waits for you to play the correct notes before con- tinuing playback of the song. This lets you practice reading the music at your own pace. The notes to be played are shown in the display, one after another, as you play them correctly.
Play the appropriate part with the song. After the lead-in, the song starts automatically, and the appropriate notes appear in the display. In Lesson 3, listen carefully to the un-muted part, and play the muted part yourself. Lesson 4 — Both Hands Lesson 4 is a “Minus One”...
MIDI Functions The PSR-292 is MIDI-compatible, featuring MIDI IN and MIDI OUT terminals and providing a variety of MIDI-related controls. By using the MIDI functions you can expand your musical possibilities. This section explains what MIDI is, and what it can do, as well as how you can use MIDI on your PSR-292.
Note, Control Change, Program Change and various other types of MIDI data, or messages. The PSR-292 can control a MIDI device by transmitting note related data and var- ious types of controller data. The PSR-292 can be controlled by the incoming...
MIDI Functions Connecting to a Personal Computer By connecting your PSR-292’s MIDI terminals to a personal computer, you can have access to a wide variety of music software. G When using a MIDI interface device installed in the personal computer, connect the MIDI terminals of the personal com- puter and the PSR-292.
MIDI sequencer. If you are using the sequencer to play back the voices of the PSR-292, you would want to set this to “off” — in order to avoid getting “double” notes, both from the keyboard and from the sequencer.
MIDI Functions Keyboard Out This determines whether Keyboard performance data of the Portatone is transmit- ted via MIDI OUT or not. These settings can be made in the Function mode (page 76). Style Out This determines whether style data is transmitted via MIDI OUT or not. These settings can be made in the Function mode (page 76).
You can play or practice Flash songs (saved in flash memory) in the same way as preset songs. To transmit song data from a personal computer to the PSR-292, you first need to install the “Song Filer” application to your computer.
Page 72
I Song Filer • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • After you install Song Filer and connect the PSR-292 to the computer, you can use the two functions described below.
Press and hold the [PC] button until “WRITING!” appears in the LCD. PC mode is off MIDI Functions • No sound is output from the PSR-292 when Local ON/OFF is set to OFF. • If External Clock is set to ON, style or song playback will not start unless external clock are received.
Function The PSR-292 has a variety of settings in the Function parameters. These give you detailed control over many of the PSR-292’s features. Using the Function parameters Press the Function button. Select a Function name. Use the SELECT [ Input the appropriate value or use the [+]/[-] buttons to set the selected Function.
Page 75
-12–12 This determines the transposition of the entire PSR-292 sound. -100–100 This determines the pitch of the entire PSR-292 sound . 000–127 This determines the highest key for the Split voice and sets the Split “point” — in other words, the key that separates the Split (lower) and Main (upper) voices.
Page 76
Function CATEGORY SELECT Effect Reverb Type Chorus Type DSP Type Harmony Harmony Type Harmony Volume MIDI Local On/ External Clock Bulk Data Send Initial Setup Send Keyboard Style Out Song Out Volume Style Song Metronome Volume Time Signature Lesson Lesson Track (R) Lesson Track (L)
ON and keys are played in the auto accompaniment area of the keyboard. The PSR-292 is polyphonic up to a maximum of 32 notes. If the Dual voice or Split voice is being used and a style or song is playing back at the same time, some notes/sounds may be omitted (or “stolen”)
All Data Initialization proce- dure is carried out. • Carrying out the data initializa- tion procedure will usually restore normal operation if the PSR-292 freezes or begins to act erratically for any reason.
I Maximum Polyphony • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • The PSR-292 has 32-note maximum polyphony. This means that it can play a maximum of up to 32 notes at once, regardless of what functions are used.
Page 80
Voice List Bank Select MIDI Voice Program Change# FLUTE SYNTH LEAD SYNTH PAD PERCUSSION DRUM KITS G XG Voice List Bank Select MIDI Voice Program Change# PIANO Voice Voice Name Synth Brass Jump Brass Techno Brass Flute Piccolo Pan Flute Recorder Ocarina Square Lead...
Page 81
Bank Select MIDI Voice Program Voice Name Change# DrawOrg2 60sDrawOrg3 Even Bar 16+2"2/3 Organ Bass 70sDrawOrg2 Cheezy Organ DrawOrg3 Percussive Organ 70’s Percussive Organ Detuned Percussive Organ Light Organ Percussive Organ 2 Rock Organ Rotary Organ Slow Rotary Fast Rotary Church Organ Church Organ 3 Church Organ 2...
Page 83
Bank Select MIDI Voice Program Voice Name Change# Voice Lead Synth Aahs Vox Lead Fifths Lead Big Five Bass & Lead Big & Low Fat & Perky Soft Whirl SYNTH PAD New Age Pad Fantasy Warm Pad Thick Pad Soft Pad Sine Pad Horn Pad Rotary Strings...
Page 84
Voice List Bank Select MIDI Voice Program Change# SOUND EFFECTS Voice Voice Name Bonang Altair Gamelan Gongs Stereo Gamelan Gongs Rama Cymbal Asian Bells Agogo Steel Drums Glass Percussion Thai Bells Woodblock Castanets Taiko Drum Gran Cassa Melodic Tom G DJ Voice List Melodic Tom 2 Real Tom Voice...
Page 85
G DJ Voice List Voice No. MSB/LSB/PC 000/123/118 Note DJ Set 1 1 BD Analog H Bass Drum Soft C# 1 Analog Side Stick Side Stick 1 Analog Snare 1 Snare M D# 1 Hand Clap Hand Clap 1 Analog Snare 2 Snare H Hard 1 Analog Tom 1 Floor Tom L...
Music Database List M.D.B. No. M.D.B. Name POP HITS AlvFever Croco Rk DayPdise EasySday GoMyWay HowDeep! HurryLuv I’m Torn Imagine ISurvive JustCall JustWay NikitTrp ProudGtr SailngSx Sept.Pop SultanSw SweetLrd ThnkMsic TitanicH WatchGrl WhatALoo WhitePle YestDGtr SWING & JAZZ Alex Rag Blue Set DayOfW&R HighMoon...
Drum Kit List • “ ” indicates that the drum sound is the same as “Standard Kit 1”. • Each percussion voice uses one note. • The MIDI Note # and Note are actually one octave lower than keyboard Note # and Note. For example, in “109: Standard Kit 1”, the “Seq Click H” (Note# 36/Note C1) corresponds to (Note# 24/Note C0).
MIDI Implementation Chart YAMAHA [ Portable Keyboard ] Model PSR-292 Function... Basic Default Channel Changed Default Mode Messages Altered Note Number : True voice ************** Velocity Note ON Note OFF After Key's Touch Ch's Pitch Bend 0,32 o 38 x...
Page 91
NOTE: *1 By default (factory settings) the PSR-292 ordinarily functions as a 16-channel multi-timbral tone generator, and incoming data does not affect the panel voices or panel settings. However, the MIDI messages listed below do affect the panel voices, auto accompaniment, and songs.
Reverb, Chorus and DSP effect types which are not accessible from the PSR-292 panel itself. When one of the effects is selected by the external se- quencer, “ - ” will be shown on the display.
• UL/CSA :14W • CE :15W Power Supply • Adaptor : Yamaha PA-3C AC power adaptor • Batteries : Six “D” size, R20P (LR20) or equivalent batteries Dimensions (W x D x H) • 952 x 389 x 140 mm (37-1/2" x 15-1/3" x 5-1/2") Weight •...
PSR SERIES OF PORTATONE ELECTRONIC KEYBOARDS If during the first 90 days that immediately follows the purchase date, your new Yamaha product covered by this warranty is found to have a defect in material and/or workmanship, Yamaha and/or its authorized representative will repair such defect without charge for parts or labor.
Page 97
For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante.