hit counter script
Yamaha CLAVINOVA C L P - 3 8 Owner's Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Electronic Keyboard
  5. CLAVINOVA C L P - 3 8
  6. Owner's manual

Yamaha CLAVINOVA C L P - 3 8 Owner's Manual

Yamaha electronic keyboard user manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

C L P - 3 8 0
OWNER'S MANUAL
IMPORTANT
—Check your power supply—
Make sure that your local AC mains voltage matches the voltage specified on the name plate on the bottom panel. In some areas a voltage selector may
be provided on the rear panel of the main keyboard unit near the power cord. Make sure that the voltage selector is set for the voltage in your area. The
voltage selector is set at 240V when the unit is initially shipped. To change the setting use a "minus" screwdriver to rotate the selector dial so that the
correct voltage appears next to the pointer on the panel.
For information on assembling the keyboard stand, refer to the instructions at the end of this manual.
EN

Advertisement

Table of Contents

Troubleshooting

loading

Related Manuals for Yamaha CLAVINOVA C L P - 3 8

Summary of Contents for Yamaha CLAVINOVA C L P - 3 8

  • Page 1 C L P - 3 8 0 OWNER’S MANUAL IMPORTANT —Check your power supply— Make sure that your local AC mains voltage matches the voltage specified on the name plate on the bottom panel. In some areas a voltage selector may be provided on the rear panel of the main keyboard unit near the power cord.

  • Page 2: Special Message Section

    SPECIFICATIONS SUBJECT TO CHANGE: The infor- mation contained in this manual is believed to be correct at the time of printing. However, Yamaha reserves the right to change or modify any of the specifications without notice or obligation to update existing units.

  • Page 3: Important Safety Instructions

    C A UT I O N RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The above warning is located on the bottom of the unit. IMPORTANT SAFETY INSTRUCTIONS Read these instructions.
  • Page 4 If any liquid such as water seeps into the instrument, turn off the power immediately and unplug the power cord from the AC outlet. Then have the instrument inspected by qualified Yamaha service personnel. • Never insert or remove an electric plug with wet hands.

  • Page 5: Saving Data

    If you experience any hearing loss or ringing in the ears, consult a physician. Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed. Always turn the power off when the instrument is not in use.

  • Page 6: Introduction

    COPYRIGHT NOTICE This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which it has license to use others’ copyrights. Such copyrighted materials include, without limitation, all computer software and MIDI files, etc. Any unauthorized use of such programs and contents outside of personal use is not permitted under relevant laws.

  • Page 7: Main Features

    Internet Direct Connection (IDC) By directly connecting the CLP-380 to the Internet, you can use the special service on the Yamaha website that enables you to automatically play back a wide variety of songs (song data) in various musical genres directly on your instrument.

  • Page 8: Table Of Contents

    Table of contents Introduction About this Owner’s Manual and Data List...6 Main Features ...7 Included Accessories...7 Panel Controls and Terminals... 10 Introduction to the Controls ... 12 Before Using the Clavinova... 14 About the key cover...14 About the music rest...14 About the music braces ...14 Turning the power on ...15 Adjusting the display contrast...15...
  • Page 9 Internet Direct Connection (IDC)... 51 Connecting the Instrument to the Internet...51 About the Internet Settings (settings concerning the access point)...54 About the Internet Settings ...58 Calling Up the Connection Information...61 Exporting the Connection Information ...62 Restoring the Internet Settings to Normal (Default) Settings...63 Message List (IDC) ...64 Error Code List (IDC) ...66 Glossary of Terms (IDC)...67...

  • Page 10: Panel Controls And Terminals

    Panel Controls and Terminals Top panel £ SELECT USB TO DEVICE ∞ £ § Make sure when using the jacks and terminals to carefully check the names as printed on the panel before making connections. AC IN ¤ CLP-380 Owner’s Manual ¢...
  • Page 11 ⁄ [LAN] port ... page 74 By directly connecting the CLP-380 to the Internet, you can use the special service on the Yamaha website that enables you to automatically play back a wide variety of songs (song data) in various musical genres as background music directly on your instrument.

  • Page 12: Introduction To The Controls

    Introduction to the Controls This instrument has many buttons and controls—so many that you may feel overwhelmed at first. However, once you understand the basic operations, you’ll find the instrument is very easy to use. Press the button corresponding to the function you want to use. The buttons are the means of entrance to the functions.
  • Page 13 ■ To execute or cancel the operation, press the B [+ (YES)] / B [– (NO)] button. When a prompt is shown on the upper right of the display, press the B [+ (YES)] / B [– (NO)] button to execute or cancel the operation.

  • Page 14: Before Using The Clavinova

    Before Using the Clavinova About the key cover To open the key cover: Lift the cover slightly, then push and slide it open. To close the key cover: Slide the cover toward you and gently lower the cover over the keys. CAUTION Hold the cover with both hands when opening or closing it.

  • Page 15: Turning The Power On

    Use only the AC power cord supplied with the CLP-380. If the supplied cord is lost or damaged and needs to be replaced, contact your Yamaha dealer. The use of an inappropriate replacement can pose a fire and shock hazard! The type of AC power cord provided with the CLP-380 may be different depending on the country in which it is purchased.

  • Page 16: Setting The Volume

    Bottom surface Standard stereo phone plug TERMINOLOGY MASTER VOLUME: The volume level of the entire keyboard sound You can also adjust the [PHONES] output level and the AUX [OUT] output level using the [MASTER VOLUME] dial. Optional headphones HPE-160 Yamaha headphones.

  • Page 17: Basic Operation

    CHURCH ORGAN Herr Christ, der ein'ge Gottes-Sohn, BWV.601 The demonstration pieces listed above are short rearranged excerpts the original compositions. All other songs are original (©2008 Yamaha Corporation). Procedure Turn the power on. (In case the power is not turned ON) Press the [POWER] switch to turn the power on.
  • Page 18 Listening to the Demonstration Tunes Hearing the piano demo (using sampling technology) and iAFC demo By holding down the [DEMO] button and pressing the A [+] button to call up the “Piano Demo” display, you can hear and compare how the piano demo sounds with and without the sampling technology and iAFC demo, by turning iAFC on/off.

  • Page 19: Listening To 50 Piano Preset Songs

    Listening to 50 Piano Preset Songs The Clavinova provides performance data of 50 piano songs. You can just listen to these songs (page 19) or use them for practice (page 21). You can also refer to the included “50 greats for the Piano” booklet that contains the scores for 50 piano preset songs.

  • Page 20: Adjusting The Tempo

    Listening to 50 Piano Preset Songs Play a preset song. Press the [PLAY/PAUSE] button to start playback. PRESET P-001:Invention No.1 Adjusting the tempo You can use the TEMPO [DOWN][UP] buttons to adjust the playback tempo as required. The default tempo (the song’s original tempo) is set when you press the [DOWN] and [UP] buttons simultaneously.

  • Page 21: Practicing A One-Hand Part Using 50 Preset Songs

    Practicing a one-hand part using 50 preset songs The 50 preset songs have separate left- and right-hand parts on individual parts. You can turn the left- and right-hand parts on or off as required so you can practice the corresponding part (the part that is turned off) on the keyboard. The right-hand part is played by [RIGHT] and the left-hand part is played by [LEFT].

  • Page 22: Practicing With The Repeat Playback Function And The Preset Songs

    Listening to 50 Piano Preset Songs Practicing with the Repeat Playback function and the preset songs The Song Repeat functions can be used to repeatedly play back a song or a specific range of measures in a song. This is useful for repeated practicing of difficult-to-play phrases.

  • Page 23: Selecting And Playing Voices

    Refer to “Preset Voice List” on page 114. XG is a major enhancement of the GM System level 1 format, and was developed by Yamaha specially to provide more voices and variations, as well as greater expressive control over voices and effects, and to ensure compatibility of data well into the future.

  • Page 24: Using The Pedals

    Selecting and Playing Voices Using the pedals The Clavinova has three foot pedals: damper pedal (right), sostenuto pedal (center), and soft pedal (left) that produce a range of expressive effects similar to those produced by the pedals on an acoustic piano. Damper (right) pedal When you press the damper pedal, the notes you play have a longer sustain.

  • Page 25: Adding Variation To The Sound [Brilliance]/[Reverb]/[Chorus]

    Adding variation to the sound [BRILLIANCE]/[REVERB]/[CHORUS] The Effect function enables you to add expression to the sound. The Clavinova effects include Brilliance, Reverb, and Chorus. [BRILLIANCE] You can use this control to adjust the brilliance of the tone and change the tonality to suit your preference.
  • Page 26 Selecting and Playing Voices [REVERB] This control adds reverberation to the sound by simulating the natural reverberation of a concert hall. Procedure Pressing the [REVERB] button repeatedly toggles the reverb on and off. Even if the reverb effect is turned off, a “soundboard reverb” effect will be applied when the GrandPiano1 or GrandPiano2 voice is selected.

  • Page 27: Combining Two Voices (Dual Mode)

    Combining two voices (Dual mode) You can play two voices simultaneously across the entire range of the keyboard. In this way, you can simulate a melody duet or combine two similar voices to create a thicker sound. Refer to “Voice Combination Examples (Dual and Split)” on page 116 for examples of effective voice combinations.

  • Page 28: Splitting The Keyboard Range And Playing Two Different Voices (Split Mode)

    Selecting and Playing Voices Select another voice. Use the B [– (NO)][+ (YES)] buttons to select another voice in the same voice group. To use the identical voices, press the B [– (NO)][+ (YES)] buttons once. To use different voices within the same voice group, press the B [– (NO)][+ (YES)] buttons repeatedly.
  • Page 29 Specify the split point (the border between the right- and left-hand range). The normal setting of the split point is “F#2.” To change the split point setting: Hold down the [SPLIT] button, then use the D [–][+] buttons to specify the split point.

  • Page 30: Using The Metronome

    Selecting and Playing Voices Using the metronome The Clavinova is built-in metronome (a device that keeps an accurate tempo) is a convenient feature for practice. Procedure Start the metronome. Press the METRONOME [ON/OFF] button. Adjusting the tempo Press the TEMPO [DOWN] or [UP] button. Tempo To adjust the tempo (number of beats per minute: 5 –...

  • Page 31: Recording Your Performance

    Recording Your Performance This chapter explains how to record your performance using the Clavinova recording function. You can, for example, play back what you have played on the Clavinova keyboard for an effective practice aid. You can also record just the left-hand part, then practice the right- hand part while playing back the recorded left-hand part.

  • Page 32: Recording A Performance Without Specifying The Recording Part

    Recording Your Performance Recording a performance without specifying the recording part Procedure Select “NewSong” for recording. Press the [REC] and [STOP] buttons simultaneously. “NewSong” screen ------------- -----:NewSong Select a voice. Select a voice (or voices) for recording (see page 23). Set the other parameters, such as reverb, chorus and Song Balance.

  • Page 33: Play Back The Recorded Performance

    Start and stop recording. Recording begins automatically as soon as you play a note on the keyboard. (Optional) Press the [PLAY/PAUSE] button to start recording. The recording screen displays the current measure number. Record screen SongRecording -----:NewSong To stop recording, press the [STOP] button. The Clavinova locates the top of the song.
  • Page 34 Recording Your Performance Press the D [–][+] buttons to specify how the recording should start and end. Starting methods: Normal: The existing data will be erased after re-recording starts. FirstKeyOn: Data that exists prior to the point where you start playing a note will not be erased.

  • Page 35: Recording A Performance Of Several Different Parts

    Recording a performance of several different parts Procedure Select “New Song” and a voice for recording. Follow the same operation steps as in “Recording a performance without specifying the recording part” above. Refer to steps 1 – 2 on page 32. Specify the recording parts and engage the record mode.

  • Page 36: Other Recording Techniques

    Recording Your Performance Other recording techniques Adding data to or recording over an existing song The previous section explains how to record your performance from the beginning by selecting a blank “-----: NewSong.” You can also add your performance to or overwrite existing songs (such as 50 preset songs [P-001 –...
  • Page 37 Changing a voice or tempo after recording You can change the voice and tempo after recording to change a song’s feel or to set a more suitable tempo. You can also change these elements in the middle of a song. Procedure Select a song you wish to change (page 36).
  • Page 38 Recording Your Performance Adjusting the volume balance between playback and your performance [SONG BALANCE] While recording multiple parts one by one, you can adjust the volume balance between the playback of the recorded parts and your current performance. Procedure Move the [SONG BALANCE] slider to the left or right to make adjustments.

  • Page 39: Handling Files Such As Deleting Song Files

    Handling files such as deleting song files ... [FILE/SONG SETTING] File screens (accessed via the [FILE/SONG SETTING] button) enables you to handle files (e.g., save, delete and rename recorded songs), copy and format medias and change characters on the screen. To connect to a USB storage device, be sure to read the section “Precautions when using the USB [TO DEVICE] terminal”...
  • Page 40 MP ...Protected songs such as preset songs saved to Storage memory, or Disk Orchestra Collection (DOC) songs, and Disklavier Piano Soft songs in the Storage memory. MS, Ms ...Yamaha-protection-formatted songs in the Storage memory. USB storage device U1 ...External song U1P...External songs such as Disk Orchestra Collection (DOC) songs or...

  • Page 41: Basic File Operation

    Basic file operation A message (information or confirmation dialog) sometimes appears on the screen to facilitate operation. Refer to the “Message List” on page 104 for an explanation of each message, appropriate actions to take. Procedure Prepare for handling file(s). Prepare for handling files as follows.

  • Page 42: Saving Recorded Songs To A Usb Storage Device

    Handling files such as deleting song files ... [FILE/SONG SETTING] Saving recorded songs to a USB storage device ... [Save] Recorded songs are automatically saved to Storage memory from Current memory, so normally you won’t need to save songs using this function. However, if a “MemoryFull” message or “SystemLimit” message appear, save the song to another device using this function.

  • Page 43: Deleting A Song From The Clavinova's Storage Memory Or From A Usb Storage Device

    Deleting a song from the Clavinova’s Storage memory or from a USB storage device ... [Delete] This deletes a song from Storage memory or from a USB storage device. It is not possible to delete a preset song or current song.

  • Page 44: Copying Files

    Handling files such as deleting song files ... [FILE/SONG SETTING] Copying files ... [Copy] You can copy songs. However, you cannot copy files to the same root directory or same folder. Copy U1-001:NewaSong001 Copy operation You can copy files to other memory location. File A File B Storage memory...

  • Page 45: Moving Files

    Moving files ... [Move] You can move (cut and paste) songs. Move U1-001:NewSong001 Procedure See page 41 for information on basic operations. The following is a detailed procedure for step 4. When you move a song to/from a USB storage device, make sure that a USB storage device is connected to the instrument.

  • Page 46: Formatting A Usb Storage Device

    Handling files such as deleting song files ... [FILE/SONG SETTING] Formatting a USB storage device ... [Format] You can format media so that it can be used with the Clavinova. Format USB1 Procedure See page 41 for information on basic operations. The following is a detailed procedure for step 4.

  • Page 47: Changing The Type Of Characters On Screen

    Changing the type of characters on screen ... [CharacterCode] You can change the type of characters that appear on screen. The default setting is “International.” To input katakana, change this setting to “Japanese.” CharacterCode Procedure See page 41 for information on basic operations. The following is a detailed procedure for step 4.

  • Page 48: Playing Back Recorded Songs And Commercially-Available Music Data

    Playing Back Recorded Songs and Commercially-available Music Data You can play back songs recorded using the Record function (page 31) as well as commercially-available music data. You can also play the keyboard along with the playback. Songs containing a large amount of data may not be able to be read properly by the instrument, and as such you may not be able to select them.

  • Page 49: Return To The Main Screen

    Select the desired song. Use the C [–][+] buttons to select a song or folder. Letters indicating song types and song numbers are shown on the left of the song names, while letters indicating song types are shown on the left of folder names. In addition, folders are indicated by “DIR”...

  • Page 50: Turning Part Playback On And Off

    Playing Back Recorded Songs and Commercially-available Music Data Turning part playback on and off While the Clavinova is playing or stopped, pressing these part buttons turn off the indicators, and the data on those parts will not be played. Pressing the part buttons toggles part playback on and off.

  • Page 51: Internet Direct Connection (Idc)

    Internet Direct Connection (IDC) This feature lets you directly connect your instrument to the Internet. A service in the special Yamaha website enables you to play back a range of songs (song data) in various musical genres. For the latest services, refer to the Yamaha website: http://music.yamaha.com/idc/...
  • Page 52 Internet Direct Connection (IDC) Using a Cable Connection (Using DHCP) Connect the devices according to the example. First turn the power of the instrument off, then connect the LAN cable to the [LAN] port on the instrument, and finally turn the power on again.
  • Page 53 For an illustration of the location of the [LAN] port, see “Panel Controls and Terminals” (page 10). For a list of wireless game adaptors whose compatibility has been confirmed by Yamaha, refer to the website: http://music.yamaha.com/ download/ In addition to the modem or an access point, this connection requires a router.

  • Page 54: About The Internet Settings (Settings Concerning The Access Point)

    Internet Direct Connection (IDC) About the Internet Settings (settings concerning the access point) When you use Internet Direct Connection (IDC) for the first time, you should make the Internet settings on the instrument, then save all of the settings. Make a written note of the settings, in case you have to enter them again. Access point SSID Channel...
  • Page 55 Search for the access point(s). Press the B [+(YES)] button to search for the access point(s). The access point(s) is displayed on the screen. Wireless NetworkSearch Access point(s) Wireless  :abcdefghijk(C01)  :abcdefghijk(C01) Key icon Select the access point. Use the C [–][+] buttons to display the desired access point.
  • Page 56 Internet Direct Connection (IDC) Move the cursor to the desired point by using the C [–][+] buttons. Select a character at the cursor by using the D [–][+] buttons. Wireless WEPkey:abcde _ Insert a space Move the cursor to the position you want to insert the space, and press the C [–][+] buttons simultaneously.
  • Page 57 USB [TO DEVICE] terminal” on page 122. Connect the devices according to the example. For information on connecting the devices, refer to the website: http://music.yamaha.com/idc/ Connect the instrument to the Internet. You’ll need to make Internet settings on the instrument explained in the section “About the Internet Settings”...

  • Page 58: About The Internet Settings

    Creating the Internet Setting File Procedure Create the Internet Setting File. You need to create the Internet setting file on the special Yamaha webpage using your computer. For information about how to create the file, read the instructions on the Yamaha webpage: http://music.yamaha.com/idc/...
  • Page 59 Loading the Internet Setting Files This procedure lets you make Internet settings by loading the files created on the special Yamaha webpage to the instrument. Call up the Internet Settings screen. Hold down the [FILE/SONG SETTING] button, and press the [REC] button.
  • Page 60 Internet Direct Connection (IDC) Checking the Connection Check the connection. Press the B [+ (YES)] button. Check the Connection screen ConfigFile ConnectTest ConnectSucceeded Return to the Internet Settings screen. Press the B [– (NO)], B [+ (YES)], or [EXIT] button. Return to the default screen.

  • Page 61: Calling Up The Connection Information

    Calling Up the Connection Information This lets you confirm LAN connection environment, IP address acquisition status, Time acquisition status, and the field strength (when using a USB wireless LAN adaptor; using DHCP) for the current connection. Procedure Call up the Connection Information screen. Hold down the [FILE/SONG SETTING] button, and press the [REC] button.

  • Page 62: Exporting The Connection Information

    Internet Direct Connection (IDC) Exporting the Connection Information This procedure lets you export the detailed information on the current connection as a text file to a USB flash storage device. You can check the information on your computer. Procedure Call up the screen below. Hold down the [FILE/SONG SETTING] button, and press the [REC] button.

  • Page 63: Restoring The Internet Settings To Normal (Default) Settings

    CAUTION Restoring the instrument resets all Internet settings to the original factory-programmed settings. Yamaha recommends you that you back up your Internet settings before restoring. See “Backing up the Clavinova’s internal data [FullBackup] on page 103 for details. Internet Normal (Default) Settings List...

  • Page 64: Message List (Idc)

    66 for an explanation. The particular USB wireless LAN adaptor which is connected to the instrument is invalid. Use a USB wireless LAN adaptor whose compatibility has been confirmed by Yamaha (page 122). This message is displayed when the WEP key input is incorrect.
  • Page 65 Message This message appears if the wireless network has not been found. WirelessNetwork • Please check that the power of the access point is turned on and that the settings of the NotFound device are correct. • Set the instrument within reach of the signal from the access point. The signal will not be received if the distance from the access point is too great or there is an obstacle blocking reception.

  • Page 66: Error Code List (Idc)

    1120 The USB wireless LAN adaptor connected to the musical instrument does not function properly. Make sure to use a USB wireless LAN adaptor whose compatibility has been confirmed by Yamaha (page 53). 1130 Communication with the access point has failed.

  • Page 67: Glossary Of Terms (Idc)

    Glossary of Terms (IDC) Access point A device that acts as a communication hub for multiple wireless devices, and conventionally enables both wired and wireless LAN connections. Broadband An Internet connection technology/service (such as ADSL and optical fiber) that allows for high- speed, high-volume data communication.
  • Page 68 Site Short for “website,” this refers to the group of web pages that are opened together. For example, the collection of web pages whose addresses begin with “http://www.yamaha.com/” is referred to as the Yamaha site. Short for Secure Sockets Layer, a standard for transmitting confidential data such as credit card numbers over the Internet.

  • Page 69: Troubleshooting (Idc)

    Check the list of USB wireless LAN adaptors whose compatibility has been confirmed by Yamaha (page 122). This instrument has two USB [TO DEVICE] terminals; one on the left of the panel and one on the terminal at the front. Use the [SELECT] switch to select the desired terminal (page 123).

  • Page 70: Listening To The Songs On Internet

    Listening to the Songs on Internet Yamaha provides a special website with a data service that enables you to play back a range of songs (song data) in various musical genres on your instrument. For the latest services, refer to the Yamaha website: http://music.yamaha.com/idc/...

  • Page 71: Select A Song

    Select a song. Use the C [–][+] buttons to select a folder. Press the D [+] button to open the folder and press the D [–] button to return to the previous (upper) level. Use the C [–][+] buttons to select a desired Internet song. INTERNET I-001:xxxxxxxxxxxxxx / Start playback.

  • Page 72: Connections

    Implementation Chart” to find out what MIDI data and commands your devices can transmit or receive. The Clavinova’s MIDI Implementation Chart is available for downloading from the Yamaha Manual Library. http://www.yamaha.co.jp/manual/ CAUTION Connect or disconnect the pedal when the power is off.
  • Page 73 AUX IN [L/L+R], [R] jacks The stereo outputs from another instrument can be connected to these jacks, allowing the sound of an external instrument to be reproduced via the Clavinova’s speakers. Refer to the diagram below and use audio cables for connection. CAUTION When the Clavinova’s AUX IN jacks are connected to an external device, first turn on the power to the external device, then to the Clavinova.

  • Page 74: Connecting To A Usb Storage Device

    This port allows direct connection of the CLP-380 to the Internet, letting you use a special service on the Yamaha website for playing back songs in a variety of musical genres as background music on the instrument. Before connecting the instrument to the Internet, be sure to read the section “Internet Direct Connection (IDC)”...

  • Page 75: Connecting A Personal Computer

    ■ Copying files from a computer hard disk to a USB storage device Files contained on the hard disk of a computer can be transferred to the instrument by first copying them to the storage media, then connecting/inserting the media to the instrument. Not only files created on the instrument itself but also Standard MIDI files created on other devices can be copied to a USB storage device from the hard disk of the computer.
  • Page 76 Connections Connecting the USB port on the computer to the Clavinova’s USB [TO HOST] terminal Use a USB cable to connect the USB port on your computer to the USB [TO HOST] terminal on the Clavinova. Instrument Precautions when using the USB [TO HOST] terminal When connecting the computer to the USB [TO HOST] terminal, make sure to observe the following points.

  • Page 77: Detailed Settings

    Detailed Settings Detailed Settings You can set various parameters to make the best use of Clavinova functions, such as recording and playback, metronome, Voices, iAFC, etc. For basic procedure on making these settings, refer to page 80. Parameter List Recording and playback [FILE/SONG SETTING] Settings Saving recorded songs to a USB storage device Deleting a song from the Clavinova’s Storage memory or from a...
  • Page 78 Detailed Settings Voices [VOICE SETTING] In Dual mode, parameters with the “ ” mark are set for Voice 1 and Voice 2 individually. Settings Setting the octave* Setting the volume level* Setting the position of right and left channels* Make fine adjustments to the pitch (only in Dual mode) Selecting the reverb type Setting the reverb depth* Selecting the chorus type...
  • Page 79 Other settings [FUNCTION] Settings Changing the key Selecting a touch response Fine tuning the pitch Selecting a tuning curve for a piano voice Selecting a scale Specifying the Split Point Setting the right pedal function Setting the center pedal function Setting the left pedal function Setting the auxiliary pedal function Turning the right pedal function on/off...

  • Page 80: Making Detailed Settings

    Detailed Settings Making detailed settings Procedure Access a setting menu. Press the desired setting button ([FILE/SONG SETTING], METRONOME [SETTING], [VOICE SETTING], [iAFC SETTING], or [FUNCTION]) to access the corresponding setting menu. Press the [EXIT] button any time to close the setting menu. Select the desired parameter or part.
  • Page 81 If “Set?→” appears: Press the B [+ (YES)] button to execute the setting. The Clavinova displays “Executing” and saves the data. When the operation is complete, it displays “Completed” for three seconds, then returns to the previous screen. Main Octave Close the setting menu.

  • Page 82: Detailed Settings For Recording And Playback [File/Song Setting]

    Detailed settings for recording and playback [FILE/SONG SETTING] For information on the settings “Save” – “CharacterCode,” see “Handling files such as deleting song files ... [FILE/SONG SETTING]” on page 39. You can make detailed settings for the selected song. First, select the desired song from preset songs (“PRESET”), memory songs (“MEMORY”), or External songs (“USB1”) (see page 48).
  • Page 83 Correcting note timing [Quantize] You can correct the timing of notes. For example, you can adjust recorded notes to precise eighth or sixteenth notes. Changes are made by song. See the procedure on page 80. Stores the changed value. Quantize Execute?-->...
  • Page 84 Detailed settings for recording and playback [FILE/SONG SETTING] Auditioning the channels [ChannelListen] You can select a single channel to listen to its contents. Playback starts from the first note. See the procedure on page 80. Playback continues as long as you press and hold down this button.

  • Page 85: Detailed Settings For The Metronome Metronome [Setting]

    Detailed settings for the metronome METRONOME [SETTING] You can set the time signature, volume level, and voice of the Clavinova metronome. Procedure Press the METRONOME [SETTING] button to access the Metronome Setting menu. METRONOME [SETTING] button Setting the metronome time signature [TimeSignature] See the procedure on page 80.

  • Page 86: Detailed Settings For The Voices [Voice Setting]

    Detailed settings for the voices [VOICE SETTING] This menu enables you to make various detailed settings for the voices in Dual or Split mode and the effects. You can make these settings for each voice (or each combination of voices) individually. You can listen to the notes you play on the keyboard while changing the settings.

  • Page 87: Setting The Octave

    In Dual mode, parameters with the “*” mark are set for Voice 1 and Voice 2 individually. Parameter names enclosed in parentheses ( ) are displayed in Dual mode. Setting the octave [Octave]* The pitch of a note can be shifted upward or downward in steps of an octave.
  • Page 88 Detailed settings for the voices [VOICE SETTING] Setting the reverb type [ReverbType] You cannot set this parameter for the voice parts “Left” and “Left × Layer.” See the procedure on page 80. Main ReverbType Setting range: Room...Simulates reverberation in a room. Hall1...Simulates reverberation in a concert hall.
  • Page 89 Setting the chorus on/off [ChorusOnOff] You can set the [CHORUS] button on or off for each voice. When you select a voice, the chorus on/off setting for the voice automatically changes according to this parameter. Even if this parameter is turned on, the chorus effect is disabled if the ChorusSend parameter is set to 0.

  • Page 90: Rotary Speaker

    Detailed settings for the voices [VOICE SETTING] Setting the rotation speed of the rotary speaker* [RotarySpeed (Rot.Speed)] This will be displayed only if Rotary is selected for the DSP Type parameter explained above. It sets the rotation speed of the rotary speaker effect. See the procedure on page 80.
  • Page 91 Adjusting the low-range gain (amount of boost/cut) of the equalizer* [EQ LowGain] See the procedure on page 80. Main Set?--> EQ LowGain Setting range: -12 – +12 dB Adjusting the high-range frequency of the equalizer* [EQ HighFreq. (EQ H.Freq)] See the procedure on page 80. Main Set?-->...

  • Page 92: Detailed Settings For Iafc [Iafc Setting]

    When using iAFC, do not block the speaker located on the rear panel of the Clavinova. The optimal iAFC effect cannot be obtained if this speaker is blocked. iAFC uses Yamaha’s EMR (Electronic Microphone Rotator) technology to ensure stability against acoustic feedback. Turning iAFC on/off [iAFC] See the procedure on page 80.
  • Page 93 Adjusting the Spatial Effect depth [SpatialFX Depth] Spatial Effect is one type of the iAFC effect. Spatial Effect creates a sense of reverberation and spaciousness by picking up the output sound using internal microphones and output the sound from the speaker on the rear of the instrument.

  • Page 94: Other Settings [Function]

    Other settings [FUNCTION] You can make detailed settings for touch, tuning, scale, etc. Procedure Press the [FUNCTION] button to enter Function mode. Changing the key [Transpose] TRANSPOSE= To change the key (Changing the key: To raise or lower the overall pitch of the entire song.) The Clavinova’s Transpose function makes it possible to shift the pitch of the entire keyboard up or down in semitone intervals to facilitate playing in difficult key...

  • Page 95: Selecting A Scale

    Fine tuning the pitch [Tune] You can fine tune the pitch of the entire instrument. This function is useful when you play the Clavinova along with other instruments or CD music. See the procedure on page 80. Tune A3=440.0Hz Setting range: A3 = 414.8 Hz –...

  • Page 96: Split Point

    Other settings [FUNCTION] Specifying the Split Point [Split Point] You can specify the split point (the boundary between the right-hand and left-hand keyboard areas). See the procedure on page 80. SplitPoint Setting range: – A -1 You can also use [SPLIT] to set the split point (page 29). Setting the right pedal function [RPedalFunc] See the procedure on page 80.
  • Page 97 Expression Setting range: Same as “Right pedal function assignment” (page 96). Normal setting: Expression Yamaha FC7 foot controller This foot controller is suitable for controlling Expression, SustainCont, or PitchBend Up/Down. Yamaha FC4 foot switch Yamaha FC5 foot switch These foot switches are suitable for controlling Sustain, Sostenuto, Soft, RotarySpeed, or VibeRotor.
  • Page 98 Other settings [FUNCTION] Turning the auxiliary pedal function on/off [AuxPedalOnOff] This turns the auxiliary pedal function on or off for the relevant voice part. In other words, you can select the desired voice part (Main, MainLayer, Left, LeftLayer) and determine whether the auxiliary pedal function (set on page 97) will affect that part or not.
  • Page 99 Setting the depth of string resonance [StringResonanceDepth] This parameter is effective on the voices, such as “Grand Piano 1.” See the procedure on page 80. StringResonanceDepth Setting range: Off, 1 – 10 Setting the depth of sustain sampling for the damper pedal [SustainSamplingDepth] This parameter is effective only on the voice group “GRANDPIANO1.”...

  • Page 100: Setting The Midi Transmit Channel

    Other settings [FUNCTION] Setting the MIDI transmit channel [MidiOutChannel] This parameter enables you to specify the channel on which the Clavinova transmits MIDI data. See the procedure on page 80. MidiOutChannel Main Midi/Usb1Ch1 Select a voice part. Setting for: Main, Left, Layer, Left Layer Setting range: Midi/Usb1 Ch1 –...
  • Page 101 Selecting performance from the keyboard or song data for MIDI transmission [MidiOutSelect] You can select whether your performance data or song playback data is sent via MIDI. See the procedure on page 80. MidiOutSelect Keyboard Setting range: Keyboard ...performance data played on the keyboard Song...song playback data Normal setting: Keyboard...
  • Page 102 Other settings [FUNCTION] Selecting items saved at shutdown [MemoryBackup] You can back up some settings, such as voice selection and metronome setting, so that they will not be lost after you turn off the power to the Clavinova. Memory songs (saved in the Clavinova’s memory), the backup on/off setting (this parameter setting), and the “CharacterCode”...

  • Page 103: Displaying The Version Number

    Backing up the Clavinova's internal data [FullBackup] For maximum data security Yamaha recommends that you copy or save your important data to a USB storage device. This provides a convenient backup if the internal memory is damaged. Perform the operation after connecting the USB storage device.

  • Page 104: Message List

    Check the USB cable connection and try again. If you still see this message, use a drive whose compatibility has been confirmed by Yamaha (page 122). The number of drives exceeds the limitation. Two USB storage devices can be connected to one USB [TO DEVICE] terminal using a hub device.
  • Page 105 Message When you attempted to rename a song and save it in “Rename” (page 43), this message will DuplicateName appear if an identically-named song already exists. Three seconds after this message is displayed, you will return to the previous screen. Please specify a different name. This message prompts you to execute a file-related operation.
  • Page 106 This message appears when a protected song and the drive are not compatible. Use a drive whose compatibility has been confirmed by Yamaha (page 122). You tried to copy or delete data in internally-protected files (such as commercially available music data).
  • Page 107 B [+ (YES)] button to display the format parameter (page 46). This message appears when you connect an unsupported drive. Use a drive whose UnsupportedDrive compatibility has been confirmed by Yamaha (page 122). • The connected drive does not support use of protected songs. Use only drives whose WrongDrive compatibility has been confirmed by Yamaha (page 122).

  • Page 108: Questions About Operations And Functions

    Questions about Operations and Functions ■ The buttons do not respond. While you are using a function, some buttons not used for the function are disabled. If the song is playing, stop the playback. Otherwise, press the [EXIT] button to return to the main screen.
  • Page 109 ■ How much data can I record? • Current memory (page 39): About 300KB • Storage memory (page 39): About 1,513KB ■ The on/off setting of the pedal connected to the AUX PEDAL jack is reversed. Some types of pedals may turn on and off in opposite fashion.

  • Page 110: Appendix

    Troubleshooting Appendix Problem The power of the Clavinova does not turn on. There is a clicking noise when you press the [POWER] button to turn the power on or off. Noise is heard from the Clavinova. The overall volume is too low. Or, there is no sound at all.
  • Page 111 [EXIT] button to exit the mode and re-engage the mode. If the device is still not recognized, it may not be supported by Yamaha. Only use devices supported by Yamaha (page 122). Only use devices whose compatibility has been confirmed by Yamaha (page 122).

  • Page 112: Data Compatibility

    ■ XG XG is a major enhancement of the GM System Level 1 format, and was developed by Yamaha specifically to provide more voices and variations, as well as greater expressive control over voices and effects, and to ensure compatibility of data well into the future.

  • Page 113: Disk Format

    ■ GS GS was developed by the Roland Corporation. In the same way as Yamaha XG, GS is a major enhancement of the GM specifically to provide more voices and drum kits and their variations, as well as greater expressive control over voices and effects.

  • Page 114: Preset Voice List

    Preset Voice List Stereo Voice group Voice name sampling GrandPiano1 GRAND PIANO1 MellowPiano RockPiano HonkyTonk Piano GrandPiano2 GRAND PIANO2 BrightPiano E.Piano1 E.PIANO1 SynthPiano E.Piano2 E.PIANO2 Vintage E.Piano Harpsichord8' HARPSI CHORD Harpsichord 8'+4' E.Clavichord E.CLAVI CHORD Wah Clavi. Vibraphone Marimba VIBRA- PHONE Celesta NylonGuitar...
  • Page 115 Stereo Voice group Voice name sampling PipeOrgan Principal PipeOrgan Tutti CHURCH ORGAN PipeOrgan Flute1 PipeOrgan Flute2 × JazzOrgan JAZZOR- × RotaryOrgan × MellowOrgan Strings × STRINGS SynthStrings SlowStrings × Choir × SlowChoir CHOIR × Scat × SynthPad1 SYNTH. × SynthPad2 ×...

  • Page 116: Voice Combination Examples (Dual And Split)

    Voice Combination Examples (Dual and Split) Dual MAIN + MAIN MAIN + MAIN MAIN + MAIN MAIN + MAIN MAIN + MAIN MAIN + MAIN MAIN + MAIN Split MAIN / LEFT MAIN / LEFT MAIN / LEFT MAIN / LEFT MAIN / LEFT Dual + Split MAIN + MAIN / LEFT...

  • Page 117: Keyboard Stand Assembly

    Keyboard Stand Assembly CAUTION • Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble in accordance with the sequence given below. • Assembly should be carried out by at least two persons. •...
  • Page 118 Keyboard Stand Assembly Attach E and F to D. Secure D using the four 6 x 25mm long screws. Remove the twist tie from the folded pedal cord. Do not remove the twist tie located next to the hole. Don’t discard the twist tie, you’ll need it later in step 6.
  • Page 119 Attach A. Adjust the position of A so that the left and right ends of A will project beyond E and F equally (as seen from the rear). Secure A using two 6 x 16mm short screws from the rear. Secure A using four 6 x 16mm short screws from the front.

  • Page 120: Connect The Power Cord

    Keyboard Stand Assembly Attach C. Place on D, the stopper-wood at the bottom edges of C, then secure the top. Secure upper right and left of C using two 4 x 14mm thin screws. Secure upper center and lower of C using five 4 x 20mm tapping screws.
  • Page 121 After completing the assembly, please check the following. • Are there any parts left over? Review the assembly procedure and correct any errors. • Is the Clavinova clear of doors and other movable fixtures? Move the Clavinova to an appropriate location. •...

  • Page 122: Precautions When Using The Usb [To Device] Terminal

    • USB hub • USB-LAN adaptor The instrument does not necessarily support all commercially available USB devices. Yamaha cannot guarantee operation of USB devices that you purchase. Before purchasing a USB device for use with this instrument, please visit the following web page: http://music.yamaha.com/download/...

  • Page 123: Using Usb Storage Devices

    Using USB Storage Devices By connecting the instrument to a USB storage device, you can save data you’ve created to the connected device, as well as read data from the connected device. n Although CD-R/RW drives can be used to read data to the instrument, they cannot be used for saving data. This instrument has two USB [TO DEVICE] terminals;...

  • Page 124: Handling The Floppy Disk Drive (Fdd) And Floppy Disks (Optional)

    To maintain the disk drive in optimum working order Yamaha recommends that you use a commercially- available dry-type head cleaning disk to clean the head about once a month. Ask your Yamaha dealer about the availability of proper head cleaning disks. About Floppy Disks Handle floppy disks with care, and follow...

  • Page 125: Installing The Floppy Disk Drive (Optional)

    Installing the Floppy Disk Drive (Optional) The optional UD-FD01 floppy disk drive can be installed to the bottom of the instrument by using the included floppy disk drive case and screws. Have a Phillips-head (+) screwdriver of the appropriate size ready. Remove the three backing papers from the adhesive tape in the case, and fit the floppy disk drive into...

  • Page 126: Options

    Options ■ BC-100 Bench A comfortable bench styled to match your Yamaha Clavinova. ■ HPE-160 Stereo Headphones High-performance lightweight dynamic headphones with extra-soft ear pads. ■ UD-FD01 USB-FDD Unit Floppy disk drive for connecting to the instrument and saving/loading data.

  • Page 127: Specifications

    Specifications Item Dimensions Size/Weight Weight Keyboard Pedal Control Interface Display Panel Key Cover Cabinet Music Rest Music Clips Tone Generation Voices Polyphony Preset Compatibility Types Effects Functions Preset Recording Songs Compatible Data Format CLP-380 Width 1406mm (55 3/8") 943mm (37 1/8") Height With music rest: 1037mm (40 13/16") Depth...
  • Page 128 Included Accessories * Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please check with your Yamaha dealer.

  • Page 129: Index

    Index You can search the desired section using not only the terminology in this manual but also commonly-used words. The * mark indicates that the corresponding page includes the terminology explanation in the right column. Numerics 50 greats for the Piano ... 7 50 Piano Preset Songs ...
  • Page 130 Index Jacks AUX IN ... 73 AUX OUT ... 73 AUX PEDAL ... 72 PHONES ... 16 key cover ... 14 KeyOffSampling ... 99 LCD ➔ Screen Contrast ... 15 Left ... 86 Left × Layer ... 86 [LEFT] button ... 21, 31, 35 Left pedal ...
  • Page 131 Save ... 42 Scale ... 95 Select 50 piano preset songs ... 19 Demo Songs ... 17 [SELECT] switch ... 123 Selecting a touch response ... 94 SMF (Standard MIDI File) ... 112 Soft (left) pedal ... 24 Song Data Type ... 50 Detailed settings ...
  • Page 132 Memo CLP-380 Owner’s Manual...
  • Page 133 Memo CLP-380 Owner’s Manual...
  • Page 134 Compliance with FCC regulations does * This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. COMPLIANCE INFORMATION STATEMENT (DECLARATION OF CONFORMITY PROCEDURE) Responsible Party : Yamaha Corporation of America Address : 6600 Orangethorpe Ave., Buena Park,...
  • Page 135 For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante.
  • Page 136 Clavinova Web site http://music.yamaha.com/homekeyboard/ Yamaha Manual Library http://www.yamaha.co.jp/manual/ U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation © 2008 Yamaha Corporation WM91210 903MWAP3.2-05D0 Printed in China...

This manual is also suitable for:

Clavinova clp-380

Table of Contents