D-Link DIR-619L Installing Manual
Hide thumbs
Also See for DIR-619L:
- User manual (96 pages) ,
- Quick installation manual (52 pages) ,
- Quick installation manual (53 pages)
Advertisement
Quick Links
Installing Your D-Link Wireless Router
In the box
Ensure the box contains the following items. See
D-Link Wireless N300 Cloud Router, DIR-619L
Power supply, 12V/1A
Ethernet cable
Figure 1: Kit contents
If you do not subscribe to HughesNet Voice, follow the
instructions in
Installing the router without HughesNet Voice
panel 2.
If you do subscribe to HughesNet Voice, follow the instructions in
Installing the router with HughesNet Voice
Installing the router without
HughesNet Voice (cont.)
1. Ensure there is nothing plugged into the LAN port on your
HughesNet modem (such as your laptop or PC). If there is,
remove it.
Leave the other modem cable connections as they are.
2. Connect the blue Ethernet cable provided in the kit to the LAN
port on your modem.
3. Connect the other end of the blue Ethernet cable to the
yellow LAN port on the D-Link wireless router.
4. Connect the power supply provided in the kit to the wireless
router.
5. Plug the power supply into an electrical outlet or surge
protector.
6. [Optional] Using an Ethernet cable, connect your laptop or PC
to a LAN port on the wireless router. This provides a direct,
wired connection to the network.
7. Ensure all of your connections match those shown in
8. Verify the power light on the wireless router is lit. See
Figure
3.
9. Wait 2 minutes, then check that the power, Internet, and Wi-
Fi signal lights on the top of the router are lit. If anything is
plugged into the router LAN ports, those lights will also
illuminate. See
Figure
3.
Figure 3: Router LEDs
10. Proceed to
Logging into your new wireless network
panel 6.
Figure
1.
on
1
on panel 4.
Figure
2.
on
3
Installing the router without
HughesNet Voice
Only follow the steps in this section if you do not subscribe to
HughesNet Voice.
When you have completed the steps in this section, your
connections will be the same as those shown in
the figure when performing the steps.
Figure 2: Wireless router connections without Voice
Installing the router with
HughesNet Voice
Only follow the steps in this section if you subscribe to
HughesNet Voice.
When you have completed the steps in this section, your
connections will be the same as those shown in
the figure when performing the steps.
Figure 4: Wireless router connections with Voice
1040658-0001 Revision B
Figure
2. Refer to
2
Figure
4. Refer to
4
December 8, 2015
Advertisement
Related Manuals for D-Link DIR-619L
Summary of Contents for D-Link DIR-619L
- Page 1 In the box HughesNet Voice Ensure the box contains the following items. See Figure D-Link Wireless N300 Cloud Router, DIR-619L Only follow the steps in this section if you do not subscribe to Power supply, 12V/1A HughesNet Voice.
- Page 2 LAN port on the HughesNet Voice ATA. 3. Connect the other end of blue Ethernet cable to the yellow LAN port on the D-Link wireless router. 4. Connect the power supply provided in the kit to the wireless router.