hit counter script
LG Pro:Centric 24LT572M Setup Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. TV
  5. Pro:Centric 24LT572M
  6. Setup manual

LG Pro:Centric 24LT572M Setup Manual

Commercial mode, hospital grade interactive tvs
Hide thumbs
Table of Contents

Advertisement

Quick Links

© Copyright 2019 LG Electronics U.S.A., Inc.
Hospital Grade Interactive Pro:Centric 
Commercial Mode Setup Guide
Note: Selected features shown in this guide may not be available on all models.
24LT572M
28LT572M
32LT572M
43LT572M
EXPERIENCED INSTALLER
LG First Use Wizard
pages 12 – 13
Custom Master TV Setup
pages 47 – 49
Cloning Procedures
pages 50 – 55
P/N: 206-4342 (Rev A)
®
TVs

Advertisement

Table of Contents
loading

Related Manuals for LG Pro:Centric 24LT572M

Summary of Contents for LG Pro:Centric 24LT572M

  • Page 1 Note: Selected features shown in this guide may not be available on all models. EXPERIENCED INSTALLER LG First Use Wizard pages 12 – 13 Custom Master TV Setup pages 47 – 49 Cloning Procedures pages 50 – 55 P/N: 206-4342 (Rev A) © Copyright 2019 LG Electronics U.S.A., Inc.

  • Page 2: Safety Warnings

    • Consult the dealer or an experienced radio/TV technician for help. CAUTION: Do not attempt to modify this product in any way without written authorization from LG Electronics U.S.A., Inc. Unauthorized modification could void the user’s authority to operate this product.

  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS Read these instructions. 16. Power Cord Caution: Check the TV specifications in the Owner’s Keep these instructions. Manual to determine power requirements. Heed all warnings. Periodically examine the cord of your appliance, and if its Follow all instructions. appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced Do not use this apparatus near water.
  • Page 4 IMPORTANT SAFETY INSTRUCTIONS 26. Keep the product away from direct sunlight. (Continued from previous page) 27. When mounting a TV on the wall, make sure that none of the 21. Outdoor Antenna Grounding electrical cabling bears any of the weight of the TV. Install in If an outside antenna or cable system is connected to the accordance with the manufacturer’s instructions.

  • Page 5: Table Of Contents

    Complete the TV Configuration ..... 23 LG Pro:Centric Patient Remote and Pillow Speaker . . . 84 – 85 Channel Banks Overview......28 Pillow Speaker Setup .

  • Page 6: Commercial Mode Overview

    LG First Use Wizard options or using the Custom Master TV Setup procedure. LG First Use Wizard Configuration When the TV is in a factory default state, the LG First Use Wizard provides the following two configuration options. See “First Use Wizard” on pages 12 to 13 for further information.

  • Page 7: Ftg Mode

    Commercial Mode Overview (Cont.) Installer Menu To create a Master TV Setup, you will need to know how to access the commercial controller (PTC) Installer Menu and make changes to PTC INSTALLER MENU the default values as required. If necessary, familiarize yourself with xxLT572M the Installer Menu and how to make and save changes.
  • Page 8 EBL. In this mode, the EBL is the owner of the FTG Channel Map and must be LG’s Cloud Configuration Tool enables you to create configured with an FTG Channel Map and FTG Installer an FTG Configuration (.tlx) file, which may be used to Menu settings using one of the following processes: configure the CPU for FTG Mode.

  • Page 9: Determining The Tv Operating Mode

    Commercial Mode Overview (Cont.) While the TV is in FTG Mode: • Users can still access the Installer Menu using an LG Installer Remote; however, all Installer Menu items will be read-only. • FTG Mode via CPU configuration changes must be made using a “.tlx” file (typically edited in the Cloud Configuration Tool), while FTG Mode via EBL configuration changes must be made using the FTG Device Configuration Application.

  • Page 10: Pro:centric Operation

    Interactive Menu Navigation LG’s Pro:Centric pillow speaker provides access to both interactive menus and regular TV features. Press PORTAL on the Pro:Centric pillow speaker to access the interactive menus. Example: Pro:Centric Java (GEM) Application Portal...

  • Page 11: Pro:centric Java Application Setup

    TV in Factory Default State When the TV is in a factory default state, LG’s First Use Wizard provides automated or manual options for configuring the TV’s Pro:Centric server settings. See “First Use Wizard” on pages 12 to 13 for further information.

  • Page 12: First Use Wizard

    • If you plan to create a customized Master TV Setup using the procedure described on pages 47 to 49, be sure to exit the LG First Use Wizard in order to avoid setup conflicts or setting modes that may cause unintended behavior or restrict the custom setup procedure. See also “Initiate Configuration or Exit the LG First Use Wizard”...
  • Page 13 First Use Wizard (Cont.) (Continued from previous page) LG First Use Wizard Welcome to the First Use Wizard This wizard features two different setup options: • The EXPRESS SCRIPT provides streamlined configuration of this TV for Free-To- Guest (FTG) via CPU operation (including pillow speaker setup). The Express Script also provides the option to configure the TV for Pro:Centric operation.

  • Page 14: Ez-Manager Wizard

    Number settings, once initiated, the wizard will proceed through each of the configuration steps with no further user interaction. EZ-Manager Wizard Welcome to LG’s EZ-Manager Wizard • Use the EZ-Manager Wizard to configure the TV for Pro:Centric operation or to configure the TV using a USB memory device.

  • Page 15: Zone And Room Number Assignments

    EZ-Manager Wizard (Cont.) (Continued from previous page) EZ-Manager Wizard TV Configuration Options • To configure the TV for Pro:Centric operation, select ‘Next’. • To set the optional Zoning feature, select ‘Zone & Room Number’. • To configure the TV using a USB memory device, select ‘USB Configuration’. This wizard will continue automatically in 60 seconds.

  • Page 16: Configure Pro:centric Settings

    EZ-Manager Wizard (Cont.) (Continued from previous page) Note: The TV Zoning feature is only applicable for TVs that will be configured using a “.tlx” file (local or remote configuration). Also, this feature is only available when Installer Menu item 027 HOSPITAL MODE is set to 0 (i.e., Hospital Mode is disabled).
  • Page 17 EZ-Manager Wizard (Cont.) (Continued from previous page) You have the following options: • You can allow the EZ-Manager Wizard to proceed with a series of automated steps to configure the TV for Pro:Centric operation and then to look for the Pro:Centric application and maintenance (E-Z Installation) files to download.
  • Page 18 EZ-Manager Wizard (Cont.) (Continued from previous page) EZ-Manager Wizard EZ-Manager Configuration Complete The TV will turn off in 3 second(s). Installed Components Pro:Centric Application GEM application downloaded Maintenance Files LT572M_Config.tlx Reboot Turn Off Note: With the EZ-Manager Configuration Complete screen on display, you can also manually turn off or reboot the TV.

  • Page 19: Usb Configuration

    EZ-Manager Wizard (Cont.) (Continued from previous page) 4. Once all fields are completed as required, you have two options: • To save the data entered and exit the wizard, use the arrow keys to select Exit and then press OK. In the subsequent confirmation window, select Save and Exit, and then press OK once more.
  • Page 20 EZ-Manager Wizard (Cont.) (Continued from previous page) • Ensure the USB device to be used has been formatted with FAT format. • When creating files to be downloaded, avoid using special characters (?, &, @, etc.) in filenames. • Refer to “Ez Download Utility” on pages 31 to 34 for further information on the Ez Download utility.
  • Page 21 EZ-Manager Wizard (Cont.) (Continued from previous page) Update progress will be displayed on the screen. Do NOT remove the USB device while updates are in progress. When the update process is finished, depending on the type of update(s) completed, either the EZ-Manager TV Configuration Options screen will be redisplayed (software and/or boot logo image updates only—see also note below) or the TV will tune according to the Start Channel setting in the Installer Menu (TV configured with Clone/Configuration file).

  • Page 22: Express Script

    Script Welcome screen provides a brief introduction to the Express Script. Express Script Welcome to LG’s Express Script • Use the Express Script to configure the TV for Free-To-Guest (FTG) via CPU operation (including pillow speaker setup). If a Pro:Centric server is installed, the Express Script also enables you to configure the Pro:Centric settings on the TV.

  • Page 23: Complete The Tv Configuration

    Express Script (Cont.) (Continued from previous page) By default, the Data Channel is configured for Auto Search, which enables the TV’s Data Channel Auto Search feature to set the Data Channel value. See item 119 DATA CHANNEL description on page 45 for further information on the Data Channel Auto Search feature. The Pro:Centric Application Mode default setting is “Configuration Only,”...
  • Page 24 Express Script (Cont.) (Continued from previous page) The following procedure describes the remaining steps in the Express Script. You can select the “Back” button, where available, to chek previous settings, as necessary. Typically, if you do not modify the default settings, the “Next” button is automatically selected when you proceed forward within the Express Script.
  • Page 25 4. Select the pillow speaker code/voltage. If using a Pro:Centric pillow speaker (LG IR codes) or a pillow speaker with Zenith IR codes, you can simply select Next and press OK on the Installer Remote to accept the Zenith pillow speaker code default.
  • Page 26 Express Script (Cont.) (Continued from previous page) 5. Run Auto Tuning. This step gives you the option to initiate an automated channel scan that will search for all available digital and analog channels. Select Run Auto Tuning and press OK on the Installer Remote to start the channel scan.
  • Page 27 Express Script (Cont.) (Continued from previous page) Select Edit Channel Lineup and press OK on the Installer Remote to edit the channel lineup. Channel edit options will be displayed in a pop-up window (see example at right). Use the Up/ Down arrow keys to navigate between fields.

  • Page 28: Channel Banks Overview

    Express Script exits, and the TV tunes to the first channel in the FTG Channel Map. Also when the Express Script is complete, the TV is set for Channel Bank 1. If required, you can set up/modify channel banks at a later time using LG’s Cloud Configuration Tool. See “Channel Banks Overview” below for further information.
  • Page 29 Express Script (Cont.) Note: Channel banks are not supported if Hospital Mode is disabled, i.e., set to 0, or on TVs that are configured for FTG Mode via EBL, EBL-LNT Mode, or MPI-EXT Mode. Channel Attributes and Channel Bank Allocation Three attributes are available for each channel: Encrypted, OSD, and Blank Video.
  • Page 30 Express Script (Cont.) Inactive TV Setup To create an inactive TV display on Channel Bank 4, you need to modify the channel bank allocation for each channel in Channel Bank 4 to DELETED. You can do this in the Express Script, or you can use the Cloud Configuration Tool, as indicated above, to make changes.

  • Page 31: Ez Download Utility

    Ez Download Utility The Ez Download utility, available from the TV Manager, enables you to select multiple files at one time from the files loaded on a USB memory device. You may use this utility to download any one or all of the following to a TV: •...
  • Page 32 Ez Download Utility (Cont.) (Continued from previous page) • If the wizard is displayed, you can access the Ez Download utility via the EZ-Manager Wizard, as indicated above (see “Before You Begin”). However, to continue with this procedure and access the Ez Download utility from the TV menus, exit the First Use Wizard. Then, continue with step 3.
  • Page 33 Ez Download Utility (Cont.) (Continued from previous page) Note: Press on the Installer Remote, as necessary, to exit the Ez Download utility and/or the TV Manager. If you accessed the TV Manager via the EZ-Manager Wizard, you will be returned to the last screen on display before you selected the “USB Configuration” option. If you accessed the TV Manager via the TV menus, you will be returned to program viewing.
  • Page 34 Ez Download Utility (Cont.) (Continued from previous page) Note: If the selected “.tlx” file does not include an FTG Channel Map, the message, “No Channel Map in Clone file,” will be displayed at the right of the screen. 9. When you are ready to continue, use the arrow keys on the Installer Remote to select Apply, and then press OK.

  • Page 35: Installer Menu

    Installer Menu descriptions in this document if you are configuring the TV CPU using an FTG Configuration (.tlx) file created using LG’s Cloud Configuration Tool or configuring the EBL locally (.rml) or remotely (via FMA-LG102 / .fma) using the FTG Device Configuration Application software.

  • Page 36: Using The Installer Menu

    Installer Menu (Cont.) As part of the Installer Menu header (in all modes), two 3-character acronyms are displayed to indicate the TV’s current configuration mode. The table below lists all possible mode identifiers for these TV models. Acronym Description CPU-CTV Pass-through Mode with Channel Lineup in CPU CPU-FTG FTG Mode via CPU...
  • Page 37 Installer Menu (Cont.) Installer Menu Items 000 through 041 Item Function Value Range Default Value Brief Description of Function INSTALLER SEQ 0 – 3 Leave default set to 0. Selects the number of hours of inactivity allowed before the TV automatically POWER MANAGE 0 –...
  • Page 38 Installer Menu (Cont.) Installer Menu Items 042 through 116 Item Function Value Range Default Value Brief Description of Function Determines the Aux inputs for which auto-sensing is enabled. See detailed AUTO INPUTS 0 – 255 descriptions. STRT AUX SRCE 1, 3, 5, 255 Sets the starting Aux source (if item 004 STRT CHANNEL is set to 0).

  • Page 39: Detailed Descriptions Of Installer Menu Items

    Installer Menu (Cont.) Installer Menu Items 117 through 122 Item Function Value Range Default Value Brief Description of Function FACT DEFAULT 0 / 1 Set to 1 to restore the factory default settings of all Installer Menu items. Determines the powered status of the embedded b-LAN module and the GAME POWER SAVINGS 1, 3, 7 CONTROL/MPI port.
  • Page 40 Installer Menu (Cont.) 003 - BAND/AFC (Band/Automatic Frequency Control) Note: The factory default volume level (i.e., when AC power is Selects the RF band used by the NTSC tuner: initially applied) for these TV models is 20. In addition, if AC power is removed/disconnected and then reapplied to the TV while this 0 = Broadcast 1 = Cable (default)
  • Page 41 Zenith (+12v) Zenith Bed #1 TV Only Zenith (+12v) Zenith Bed #2 Note: See Reference section, “LG Pro:Centric Patient Remote TV Only Philips (+5v) Zenith Bed #1 and Pillow Speaker,” for additional information. Also, see documentation for the accessory package that includes the multi-...
  • Page 42 Installer Menu (Cont.) Note: The default setting (254) is not selectable in the Installer 032 - TIMING PULSE Menu. If you ever need to restore the default setting, you must MPI Communication Parameter. Sets the baud rate for MPI. Step reload the factory default settings.
  • Page 43 Installer Menu (Cont.) 047 - AUX STATUS 077 - QUICK SHUTOFF Controls the MPI status channel response for Aux sources. Set to Allows end user (patient) to turn OFF TV using mechanical (analog) 1 for the Aux source to be reported as its channel number. Set to Pillow Speaker Channel Up/Down buttons.
  • Page 44 Installer Menu (Cont.) 090 - KEY LOCK Once you exit the Installer Menu, turn OFF the TV for at least one If set to 1, Key Lock is enabled, which means that the display panel minute to initiate the Pro:Centric application download. When power button function will be locked, i.e., non-functional.
  • Page 45 Installer Menu (Cont.) 106 - ASP RATIO LOCK (Aspect Ratio Lock) For TVs in Pass-through Mode or FTG Mode via CPU, if this item Set to 0 to use the default aspect ratio each time the TV is turned is left at its default value (255), the TV’s Data Channel Auto Search ON (see item 096 DEF.
  • Page 46 Installer Menu (Cont.) Caution: UPDATE TIME HR should NEVER be set to 255. This setting is intended for factory use only. Note: This item is not available in the Installer Menu when item 119 DATA CHANNEL is set to 0, except when item 002 AC ON is set to 2, 3, 18, or 19 for Instant ON.

  • Page 47: Custom Master Tv Setup

    Custom Master TV Setup This section describes how to create a customized Master TV Setup for cloning purposes when the TV is in Pass-through Mode. All cloning (export and import) processes on the TV are performed via USB memory device / “.tlx” file. The Master TV Setup may be exported to a Clone (.tlx) file, which can then be used (i.e., imported) to configure either TVs that are to remain in Pass-through Mode or TVs that are to be configured for FTG Mode via CPU.

  • Page 48: Custom Master Tv Setup Procedure

    Custom Master TV Setup (Cont.) Custom Master TV Setup Procedure 1. Turn ON the TV. The next step depends on whether the First Use Wizard appears on the screen when you turn ON the TV: • If the wizard is displayed, the TV is in the required factory default state. To continue with this procedure, exit the wizard, and then go to step 2.
  • Page 49 Custom Master TV Setup (Cont.) (Continued from previous page) 3. Set up TV features. On-screen setup menus control the features of the TV. Press PICTURE MENU on the Installer Remote to access the TV setup menus, and then set Picture, Sound, Channels, etc. options to the desired Picture configurations.

  • Page 50: Cloning Procedures

    Cloning Procedures Cloning typically refers to the process of using a Master TV Setup to configure a Target TV. This section describes how to save (export) a Master TV Setup and then transfer (import) it to a Target TV using a USB memory device / Clone (.tlx) file. You can also create an FTG Configuration (.tlx) file using the Cloud Configuration Tool and then use the Import Clone File procedure to transfer the configuration to Target TVs.
  • Page 51 Cloning Procedures (Cont.) (Continued from previous page) Note: Ez Download is always selected by default when you initially access the TV Manager. Also note that Diagnostics is for service use only. 5. To gain access to the “Export Clone File” option in the TV Manager, key in the following number sequence on the Installer Remote: 9-8-7-6.

  • Page 52: Importing A Clone File

    Cloning Procedures (Cont.) (Continued from previous page) 8. When you are ready to continue, i.e., when you have selected the desired filename, press OK to export the file. Export progress will be displayed on the screen. This process may take a few minutes. Do NOT remove the USB device while exporting is in progress.
  • Page 53 Cloning Procedures (Cont.) (Continued from previous page) • If you would like the Target TV(s) to remain in Pass-through Mode after the Clone/Configuration (.tlx) file is imported, ensure the “.tlx” file does not contain an FTG Channel Map; otherwise, the import will result in the Target TV(s) being configured for FTG Mode via CPU.
  • Page 54 Cloning Procedures (Cont.) (Continued from previous page) 3. If applicable (see also “Before You Begin” above), make sure to set the appropriate TV Zone # in the Target TV at this time. Note: In order for the proper TV Zone profile data to be applied, the appropriate TV Zone # must be set in the Target TV BEFORE importing is initiated.
  • Page 55 Cloning Procedures (Cont.) (Continued from previous page) A checkmark will appear at the left of the selected option. Logical tuning is selected by default. Note: If the “.tlx” file does not include an FTG Channel Map, the message, “No Channel Map in Clone file,”...

  • Page 56: Cloud Configuration Tool Overview

    IN FTG MODE, THE CPU CANNOT BE SWITCHED TO FTG MODE. This section provides an overview of LG’s Cloud Configuration Tool web application, which is used for FTG Mode via CPU configuration. For best results, it is recommended that you access the Cloud Configuration ®...
  • Page 57 Cloud Configuration Tool Overview (Cont.) (Continued from previous page) • If you are creating an FTG Configuration file from scratch and this is your first time using the Cloud Configuration Tool, you may wish to select the wizard setup, which will guide you through the essential steps of creating the file, i.e., creating the FTG Channel Map and/or the Installer Menu profile(s).
  • Page 58 Cloud Configuration Tool Overview (Cont.) (Continued from previous page) 3. If you need to edit the FTG Channel Map from an existing file (see previous step) or create a new FTG Channel Map, click on CHANNEL MAP in the menu options bar at the top left of the page to access the Channel Map web page (see example on page 60), and edit/create the FTG Channel Map.

  • Page 59: File Manager Web Page Overview

    Cloud Configuration Tool Overview (Cont.) File Manager Web Page Overview The File Manager page (displayed after you select ADVANCED SETUP from the Welcome page) enables you to compile, modify, and save (export) FTG Configuration (.tlx) files. The following example provides an overview reference of the functions available on the File Manager page. Data contained in uploaded FTG Data to be saved in the FTG Configuration (.tlx) file.

  • Page 60: Channel Map Web Page Overview

    Cloud Configuration Tool Overview (Cont.) Channel Map Web Page Overview On the Channel Map page, you can create, view, and edit a Logical Channel Map. Click the RF CHANNEL button Search for existing channels or to add a new RF channel to clear the FTG Channel Map.
  • Page 61 Cloud Configuration Tool Overview (Cont.) The following example illustrates the fields that define the channel. Set Zone restriction(s) per channel. Assign the RF, Major, and Minor Zones you select will be listed in the Select a channel icon (select channel numbers and PLP ID for “No Logo”...

  • Page 62: Installer Menu Web Page Overview

    Cloud Configuration Tool Overview (Cont.) Installer Menu Web Page Overview Load default Installer Menu for selected model. Assign Zone as applicable. Once you click on CREATE (Advanced Setup only) Cloud PROFILE, this Installer Menu profile will be listed under Configuration Tool menu bar the Installer Menu Profile List, and Installer Menu items provides access to all utilities.
  • Page 63 Reference: Updating TV/PTC Software using a USB Memory Device This section describes how to update TV (CPU) and/or PTC software using the TV Manager “Update TV Software” and/or “Update PTC Software” option(s), respectively, though you may also use the Ez Download utility to update software, if desired. See “Ez Download Utility” on pages 31 to 34 for further information.
  • Page 64 EPK: ##.##.## [Forced Update Option] SPI Boot LG Boot Logo CPU_SW.epk 5. Use the Up/Down arrow keys to select/highlight the update file to download. Then, press OK. Note: Do not select Forced Update options unless you have been specifically instructed to do so or have previous experience with Expert Software Updates.

  • Page 65: Device

    Reference: Downloading a Boot Logo Image using a USB Memory Device This section describes how to download a boot logo image using the TV Manager “Download Boot Logo” option, though you may also use the Ez Download utility to download the boot logo, if desired.
  • Page 66 Reference: Downloading a Boot Logo Image using a USB Memory Device (Cont.) (Continued from previous page) 4. Use the Up/Down arrow keys to select Download Boot Logo, and then press OK. TV MANAGER Download Boot Logo BootLogo.jpg BootLogo_ProC.jpg Back 5. In the Download Boot Logo screen, use the Up/Down arrow keys to select the image file to download, and then press OK.

  • Page 67: Power Consumption Settings

    Reference: Power Consumption Settings The following tables assume that Installer Menu item 118 POWER SAVINGS is set to 3 (default) and Installer Menu item 099 BACK LIGHTING is set as shown below (default value is 255). 24LT572M 28LT572M  * 32LT572M 43LT572M Item 099 Power...

  • Page 68: Tv Aux Input Configuration

    Reference: TV Aux Input Configuration ENABLE MPI DATA MPI DATA DATA STATUS DIRECT ACCESS DATA STATUS STATUS TYPE TYPE 0xD2 Tuning Installer Installer Menu TYPE 0x0D 0x41 SOURCES CURRENT AV Menu Item AUX SOURCE (R) ENABLED (R/W) SOURCE (R) 046 START AUX SRCE Installer Installer...

  • Page 69: B-Lan Setup & Overview

    3 (default) A b-LAN enabled head end device, such as an LG FMA-LG102, broadcasts over the RF distribution system to communicate to multiple TVs. When the TV is first installed, it must be turned ON in order for its embedded b-LAN module to receive communication from the head end device.

  • Page 70: Ftg Mode Via Ebl (Local Configuration)

    Refer to the Free-To-Guest (FTG) Device Configuration Application User Guide for further information. FTG Device Configuration Application software is available online at: www.lg.com/us/business/display-solutions/ftg. Note: If the TV CPU is already in FTG Mode, you cannot use this procedure to make changes to the FTG Channel Map and FTG Installer Menu settings.
  • Page 71 Reference: FTG Mode via EBL (Local Configuration) (Cont.) (Continued from previous page) 4. Turn ON the TV. Note: If Installer Menu item 118 POWER SAVINGS is set to 3 (default), the TV must be ON in order for steps 6 and 7 to be successful. 5.

  • Page 72: Auto Input(S) Sensing Feature

    Reference: Auto Input(s) Sensing Feature This section provides detailed settings information for Installer Menu item 042 AUTO INPUTS. To disable auto-sensing for all available Aux inputs, set item 042 to 0. To enable auto-sensing for all available Aux inputs, set item 042 to 255. For specifications on all other available settings (i.e., settings for individual inputs), refer to the table on the following page.
  • Page 73 Reference: Auto Input(s) Sensing Feature (Cont.) The following table shows all available Aux inputs as if each is enabled in the Installer Menu. The Installer Menu text codes for item 042 will be altered accordingly if any of the available Aux inputs are disabled in the Installer Menu.

  • Page 74: Lt572M Hospital Operations

    The following table identifies when and how the LT572M hospital features are supported in three different TV configurations. As indicated in the introduction to this document, LG commercial TV functionality is based on “ownership” of the Channel Map. For the purposes of this table, “CPU” indicates that the TV is in Pass- through Mode with the Channel Map in the CPU (i.e., auto-tuned/edited channel lineup) and “PTC”...
  • Page 75 Reference: LT572M Hospital Operations (Cont.) Speaker Selection The following table identifies the speaker sound source as determined by Installer Menu items 027 HOSPITAL MODE and 020 FEATURE LEVEL and the Sound Out setting in the Audio Menu. Item 027 HOSPITAL Item 020 FEATURE Audio / Sound Out Menu Sound Source...

  • Page 76: Restoring Factory Defaults On The Tv(S)

    This section describes how to restore a single TV, regardless of its mode, to a factory default condition. The following procedure requires that you contact LG technical support to obtain a predefined value/ password for Installer Menu item 117 FACT DEFAULT that enables access to initiate a factory “IN-STOP”...

  • Page 77: Using The Tv Zoning Feature

    Reference: Using the TV Zoning Feature This section describes the TV Zoning feature available with the LT572M model TVs. The TV Zoning feature enables you to create localized configurations for TVs in selected “Zones” within the installation site, for example, a lobby area, fitness center, restaurant, etc. This feature is primarily intended for use when the TV is configured for FTG Mode via CPU operation.
  • Page 78 Reference: Using the TV Zoning Feature (Cont.) FTG Channel Map Zone Restrictions In the Cloud Configuration Tool / Channel Map web page, you can place Zone restrictions on individual channels that may be prohibited or deemed unsuitable for certain locations. One or more Zone restrictions (1–8) may be placed on each channel that is to be restricted.
  • Page 79 Reference: Using the TV Zoning Feature (Cont.) (Continued from previous page) • Zone: Enables you to set a TV Zone # so that the TV can be configured with Installer Menu and/or Setup Menu settings intended only for the assigned Zone. The Installer Menu and/or Setup Menu settings may be provided in a Clone/Configuration (.tlx) file.

  • Page 80: 24/28Lt572M Rear And Side Jack Panels

    Reference: 24/28LT572M Rear and Side Jack Panels TV-LINK CFG HDMI IN 1 (3.5 mm jack) Use to connect PC to TV (EBL) Connection for HDMI output for local FTG Mode via EBL configuration. from external device. UPDATE PILLOW SPEAKER Restricted to software updates. Connect pillow speaker here.

  • Page 81: 32/43Lt572M Rear And Side Jack Panels

    Reference: 32/43LT572M Rear and Side Jack Panels GAME CONTROL/MPI When the TV/EBL is in Pass-through Mode, the HDMI IN 1 MPI function enables an external MPI control Connection for HDMI output from device (i.e., VOD/PPV STB, etc.) to control the TV. external device.

  • Page 82: External Stereo Speaker Specifications

    Reference: External Stereo Speaker Specifications The SPEAKER OUT / LINE OUT 3.5 mm stereo jack on the LT572M rear panel provides stereo speaker EXTERNAL SPEAKER_R- (Sleeve) signal outputs (fixed speaker, variable speaker, or fixed line level [amplifier]) for external audio equipment. EXTERNAL SPEAKER_R+ (Ring 2) Set Installer Menu item 097 AUDIO OUTPUT as required in accordance with external audio equipment EXTERNAL SPEAKER_L- (Ring 1)

  • Page 83: Installer Remote Control Typical Key Functions

    Reference: Installer Remote Control Typical Key Functions An LG Installer Remote is required to set up and operate the TV. The LG Installer Remote illustrated below shows typical remote control functions and is provided for reference only. TV LG1/TV LG2 & TV Z1/TV Z2...

  • Page 84: Lg Pro:centric Patient Remote And Pillow Speaker

    Set the Patient Remote IR Code Scheme VOL + CH + (Multi-code Feature) This section describes how to set the LG Pro:Centric patient remote to send unique IR codes based on “bed number” in a multi-TV single room VOL - CH - installation.
  • Page 85 Reference: LG Pro:Centric Patient Remote and Pillow Speaker (Cont.) USB Media Navigation This section provides a brief overview of the LG Pro:Centric patient remote and LG Pro:Centric pillow speaker navigation tools for use with USB media files (photos, videos, music, etc.).
  • Page 86 Controlling the TV with Serial Data VOLUME MUTE These TV models are capable of being controlled by a single-wire, serial data signal. This is an LG patented technology and is being implemented by certain brands of “smart” pillow speakers. Pillow Speaker Interface PILLOW SPEAKER This connector provides an interface for patient-pendant remote control or entertainment audio and nurse call systems.

  • Page 87: Pillow Speaker Setup

    Reference: Pillow Speaker Setup (Cont.) Controlling the TV with Mechanical Switches A typical analog pillow speaker with mechanical switches will momentarily connect pin 1, 3, or 6 to pin 4 (Common) to control Power ON/OFF, Channel Up, or Channel Down. See schematic below. These pins are at +13 volts DC (when measured from pin 4) with the switches open.

  • Page 88: Vesa Standard Tv Mounts

    Reference: VESA Standard TV Mounts General Guidelines: Choosing a Location for Installing a VESA Standard Mount To the right are some examples of VESA standard mounts. Since there are numerous types of stands and mounts available, only a few are shown here. Refer to the instruc- tions provided with the TV stand that will be used to mount the TV.

  • Page 89: Tlt Communication Parameters

    Reference: TLT Communication Parameters RS-232C IN (CONTROL & SERVICE) Jack Configuration Note: This feature is applicable only for 32/43LT572M TVs. RS232C IN (CONTROL & SERVICE) RS232C IN (CONTROL & SERVICE) Jack 3.5 mm Jack on TV 4 Contact Configuration Contact Description Connects to 1 (Tip) Connects to 2 (Ring 1)
  • Page 90 Reference: TLT Communication Parameters (Cont.) Transmitting / Receiving Protocol This communication protocol transmits and receives 1-byte ASCII data representation for each Command, Set ID, and Data character. Therefore, a standard ASCII terminal program can be used to send and receive the protocol.
  • Page 91 Reference: TLT Communication Parameters (Cont.) Data Conversion (Hexadecimal : Decimal) In cases where decimal values are shown in commands, refer to following conversion examples to enter the [Data] value in the terminal program as hexadecimal. Note: The Channel Tune (ma) Command uses two-byte hexadecimal values ([Data]) to represent the channel number.
  • Page 92 Reference: TLT Communication Parameters (Cont.) Acknowledgment Acknowledgment [e][ ][Set ID][ ][OK/NG][Data][x] [j][ ][Set ID][ ][OK/NG][Data][x] 10. Sharpness (Command: k k) 05. Volume Control (Command: k f) To adjust the screen sharpness. To adjust volume. Command Structure Command Structure [k][k][ ][Set ID][ ][Data][CR] [k][f][ ][Set ID][ ][Data][CR] Data Min: 00 to Max: 32 Data Min: 00 to Max: 64...
  • Page 93 Reference: TLT Communication Parameters (Cont.) 14. Color Temperature (Command: x u) [Data1  –   4 ]: Major/Minor Channel number − Data1 & Data2: xx (Don’t care) To adjust color temperature. − Data3 & Data4: xx (Don’t care) Command Structure [Data5]: Input Source (Analog) −...
  • Page 94 Reference: TLT Communication Parameters (Cont.) 20. Input select (Command: x b) Acknowledgment To select input source for main picture.  * [a][ ][Set ID][ ][OK][Data 0][Data1] Command Structure [Data2][Data3][Data4][Data5] [x][b][ ][Set ID][ ][Data][CR] [x][a][ ][Set ID][ ][NG][Data0][x] Data 00: DTV 01: CADTV 17.
  • Page 95 Reference: TLT Communication Parameters (Cont.) Key Codes The following table provides key codes for a typical LG Installer Remote. Note: Some keys are not applicable to all models. Code Function Code Function (Hexa) (Hexa) PAGE (Green) PAGE (Red) (Yellow) (Blue)

  • Page 96: Troubleshooting

    Too much light in room. Dim room light. Remote IR codes do not match Make sure the Installer Remote is compatible. Contact your LG setting(s) in TV. representative, as necessary. Then, check settings both in the TV and on the remote. IR codes sent by the remote must match the setting(s) in the TV.

  • Page 97: Commercial Mode Check / Ftg Operation Troubleshooting

    Troubleshooting (Cont.) Commercial Mode Check / FTG Operation Troubleshooting Commercial Mode Check Use this flowchart to determine whether the TV is currently in Commercial Mode. Press POWER on Installer Remote. connected Plug into AC TV turned to AC Power outlet. Power? Leave the TV set ON, and press MENU on...

  • Page 98: Channel Banks Setup Troubleshooting

    Troubleshooting (Cont.) Channel Banks Setup Troubleshooting Possible Cause Possible Solution Symptom Channel is blanked in all Blanking a channel in one channel bank Modify the channel attribute(s), if desired, using the channel banks. will make it blank in all channel banks. Cloud Configuration Tool / Channel Map utility.

  • Page 99: Glossary Of Terms

    Refers to a particular commercial mode of assure rapid, broad deployment of HDTV and A mode of operation that provides a broad operation within an LG TV. See also FTG other high-value digital content. range of commercial TV features based on Mode.

  • Page 100: Notice

    In addition to the source code, all referenced license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon e-mail request to opensource@ lge.com.

  • Page 101: Back Cover

    1-888-865-3026 www.lg.com/us/business Pro:Idiom is a registered trademark of Zenith Electronics LLC. Pro:Centric and the “LG” logo are registered trademarks of LG Electronics Inc. b-LAN is a trademark of SONIFI Solutions, Inc. All other trademarks or registered trademarks are the property of their respective owners.

This manual is also suitable for:

Pro:centric 28lt572mPro:centric 32lt572mPro:centric 43lt572m

Table of Contents