Checking The Alarm And Link Leds On The Optical (Atm/Pos Oc-3) Line Card - Cisco ASR 5000 Installation Manual
Applying power and verifying the installation
Hide thumbs
Also See for ASR 5000:
- Administration manual (466 pages) ,
- Installation manual (294 pages) ,
- Installation procedure (8 pages)
Table of Contents
Advertisement
Applying Power and Verifying the Installation
Checking the Alarm and Link LEDs on the Optical (ATM/POS OC-3) Line Card
Each Optical (ATM) line card provides alarm LEDs for each of its four ports. These LEDs are located directly
below the fourth port, as illustrated in the figure below.
Figure 6: Alarm and Link LEDs on the Optical (ATM) Line Card
Table 24: Alarm/Link States for Optical (ATM) Line Card
LED
Red Alarm
Yellow Alarm
Checking the Alarm and Link LEDs on the Optical (ATM/POS OC-3) Line Card
LED Color
Red (ON)
OFF
Yellow (ON)
OFF
Description
Illuminates when the port is in a fault condition, such
as LOS or LOF.
Off when there is no alarm for this port.
Illuminates when the port is receiving a signal
indicating a problem at the remote end, for example,
RDI.
Off when there is no alarm for this port.
ASR 5000 Installation Guide
27
Advertisement
Table of Contents
